H&R roll bar problem
Moderator: martauto
-
mattcreak
- E30 Zone Newbie

- Posts: 13
- Joined: Wed Nov 29, 2006 11:00 pm
on full lock the alloy hits the front roll bar. has non genuine alpina replicas 17 inch alloys. didnt do this with these wheels and standard roll bar. any suggestions?
-
oakey
- E30 Zone Addict

- Posts: 4891
- Joined: Fri Feb 10, 2006 11:00 pm
- Location: Surrey
mine did the same fella. i used to have 17" alpina replicas. ive put 15' bbss on now and it still touches but less. if you attach the rollbar with the other holes(on the softer or harder setting) it may be more out the way.-im gonna have a look and see if that'll work today. its pretty bad design to be honest.
-
m-dtech
- Unapproved Trader caution
- Posts: 2068
- Joined: Thu Sep 01, 2005 11:00 pm
H&R stuff is over rated.
might help by fitting eccentric m3 bushes.
might help by fitting eccentric m3 bushes.
-
Dan318-is
- Married to the E30 Zone

- Posts: 8006
- Joined: Wed Jul 06, 2005 11:00 pm
- Location: Surrey/London
i have eibachs on the tightest setting and they dont touch 
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
Theres nothing wrong with H&R bars
Andrew
Andrew
-
pnd
- E30 Zone Squatter

- Posts: 1801
- Joined: Sat Nov 12, 2005 11:00 pm
its the wheels that are the problem.
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
oakey
- E30 Zone Addict

- Posts: 4891
- Joined: Fri Feb 10, 2006 11:00 pm
- Location: Surrey
i have the standard wheels on mine and still have the above problem. i have some eccentric control arm bushes that will be going on soon so ill be able to see if they make a difference.
is your car lowered aswell mattcreak?
is your car lowered aswell mattcreak?


