H&R roll bar problem

[mattcreak]

on full lock the alloy hits the front roll bar. has non genuine alpina replicas 17 inch alloys. didnt do this with these wheels and standard roll bar. any suggestions?

[oakey]

mine did the same fella. i used to have 17" alpina replicas. ive put 15' bbss on now and it still touches but less. if you attach the rollbar with the other holes(on the softer or harder setting) it may be more out the way.-im gonna have a look and see if that'll work today. its pretty bad design to be honest.

[m-dtech]

H&R stuff is over rated.

might help by fitting eccentric m3 bushes.

[Dan318-is]

i have eibachs on the tightest setting and they dont touch

[stuartgallafant]

H&R stuff is over rated..

i've heard extremely good reviews about these roll bars

[Demlotcrew]

Theres nothing wrong with H&R bars

Andrew

[pnd]

its the wheels that are the problem.

[stuartgallafant]

its the wheels that are the problem.

i agree...

[oakey]

i have the standard wheels on mine and still have the above problem. i have some eccentric control arm bushes that will be going on soon so ill be able to see if they make a difference.
is your car lowered aswell mattcreak?