n/s rear footwell
Moderator: martauto
-
jcjdavis1
- E30 Zone Camper

- Posts: 1128
- Joined: Thu Apr 13, 2006 11:00 pm
- Location: Paisley Scotland
Hi 1990 4door 316i carpet in n/s rear footwell sodden any ideas as to where water coming in,rest of carpets dry.floor pan solid.thanks
-
316eyes
- E30 Zone Regular

- Posts: 947
- Joined: Fri Feb 18, 2005 11:00 pm
- Location: Sunny Greece
If the car has a sunroof my favourite would be:
Blocked sunroof drains.
Or could be:
Rust hole(s) at the bottom of the rear wheel arch.
Blocked sunroof drains.
Or could be:
Rust hole(s) at the bottom of the rear wheel arch.
I'm not completely perfect.......there are some bits missing or broken.
But the weather here helps!!!
But the weather here helps!!!
-
jcjdavis1
- E30 Zone Camper

- Posts: 1128
- Joined: Thu Apr 13, 2006 11:00 pm
- Location: Paisley Scotland
will check this out asap thanks

-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Each side of an E30 floorpan has a 90mm round hole in it directly under each front seat. These holes are blocked by metal plates with three lugs on them which twist lock into the holes.
The plates come loose, usually because one of the lugs rusts off, and you get water in the rear footwells.
The plates come loose, usually because one of the lugs rusts off, and you get water in the rear footwells.
-
feens
- E30 Zone Regular

- Posts: 460
- Joined: Fri May 19, 2006 11:00 pm
- Location: Longford
Ive the same problem whats the best way to fix this cheers Brian
from another brian
from another brian
-
mikey-t
- E30 Zone Regular

- Posts: 444
- Joined: Sun Aug 06, 2006 11:00 pm
yeah i got that accept my floor isnt wet as such just damn sticky! might have to rip carpet up

-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Probably can get new plates from the dealer and seal them in, but I haven't checked the ETK.feens wrote:Ive the same problem whats the best way to fix this cheers Brian
from another brian
If I'm having a welding session on an E30, I just weld plates over the holes.
-
feens
- E30 Zone Regular

- Posts: 460
- Joined: Fri May 19, 2006 11:00 pm
- Location: Longford
Ill Ring the local dealers and seeI if not the welder is coming out Cheers Lad!Brianmoooore wrote:Probably can get new plates from the dealer and seal them in, but I haven't checked the ETK.feens wrote:Ive the same problem whats the best way to fix this cheers Brian
from another brian
If I'm having a welding session on an E30, I just weld plates over the holes.
