what engine mod's can i carry out on my 318IS? I know i can go for the Zone chip and bbtb? is there anything else i can do to up my BHP?
Thanks in advance!
M42 power?
Moderator: martauto
- Brianmoooore
- E30 Zone Team Member

- Posts: 49358
- Joined: Mon Jan 10, 2005 11:00 pm
Not a lot for little money. BMW got it mostly right in the first place.
IIRC, the standard cams can be retimed to give more peak power.
IIRC, the standard cams can be retimed to give more peak power.
-
Ant
- Retired Team Member

- Posts: 10496
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: PD+E dept :D
- Contact:
the M42 will respond well to more advance on the inlet cam, from 100 to 106 degrees, be V careful with tweaking though, and of course, turn the engine over by hand to double check before throwing the key, I should add though, that the tweak is well known, aqnd may have already been doen, so check the current timing before making any changes
HTH
HTH
Product Development and Endurance for Delphi.
Original performance chips, original works not unlicensed copies
Email FTW
Original performance chips, original works not unlicensed copies
I was under the impression from what ive read on here that changing the cam timing can give you a bit at the top but you lose some torque lower down the revs.........or is that jut me? 
Gaffa tape is like "the force" - it has a light side, a dark side, and it holds the universe together.
There's nothing that shouts "Poor Workmanship" more than wrinkles in the Gaffer tap
There's nothing that shouts "Poor Workmanship" more than wrinkles in the Gaffer tap
- Brianmoooore
- E30 Zone Team Member

- Posts: 49358
- Joined: Mon Jan 10, 2005 11:00 pm
Probably so, you don't get something for nothing - and BMW designers do know what they're doing.benjy wrote:I was under the impression from what ive read on here that changing the cam timing can give you a bit at the top but you lose some torque lower down the revs.........or is that jut me?
Fu*k it then, supercharger it is.......... 
Gaffa tape is like "the force" - it has a light side, a dark side, and it holds the universe together.
There's nothing that shouts "Poor Workmanship" more than wrinkles in the Gaffer tap
There's nothing that shouts "Poor Workmanship" more than wrinkles in the Gaffer tap
-
iDreamBeemer
- E30 Zone Camper

- Posts: 1177
- Joined: Mon Feb 14, 2005 11:00 pm
- Location: Camberley
Is it worth putting on a Big Bore throttle Body?
Was thinking of this plus RR retune/Zone Chip?
Was thinking of this plus RR retune/Zone Chip?
- darren318is
- E30 Zone Newbie

- Posts: 75
- Joined: Thu May 19, 2005 11:00 pm
- Location: dundalk, ireland
i wanna no 2... how many horses will a zone chip and bbtb give separately and together.....?



[img]http://