E28 Flywheel Bolts and M30 Clutch Slave

[ImysE30]

Looking at getting some new one's but on bmwfans it say's that they are NLA

http://bmwfans.info/parts/catalog/E28/S ... _flywheel/

Are the E34 one's the same or what else can I use?


Also, is it best to use a M30 clutch slave? ECP one good enough to do the job?

http://www.eurocarparts.com/ecp/c/BMW_5 ... 6d197&CSCY


TIA

[shedrool83]

http://www.realoem.com/bmw/partxref.do? ... +1+717+840


They seem to be the same as alot of models

[ImysE30]

All NLA.

[shedrool83]

Order them from bminiparts they have 51 of them.

http://www.bmminiparts.co.uk/PartDetail ... 517BCE7F07

[ImysE30]

Nice one, thanks for the link, i'll get them ordered

Any ideas on the clutch slave cylinder?

[Bristol_Jer]

I just reused mine, with a good dab of threadlock. Have always done this when rebuilding engines, most people usually do that I know of

[leeparkes]

I just reused mine, with a good dab of threadlock. Have always done this when rebuilding engines, most people usually do that I know of

Me too

Even Yoda agrees... if its good enough for Dan its good enough for me.


http://www.e30zone.net/modules.php?name ... ight=bolts

[ImysE30]

I'll just be flash and buy some new one's as they not that expensive

[ImysE30]

Bump for second question

[leeparkes]

Im using the M20 one with no issue's.

[Rav335uk]

So am I, but me thinks my Master is on it's way out

[ImysE30]

Saves me a few quid then

The Master on mine looks pretty new, not a big job to change I would of though anyway.

[Cypriotgeeza]

i changed my master cylinder when i had them clutch problems took the best part of 15mins to do..not a hard job at all!

Also every mechanic i knows re-uses the flywheel bolts, after a good wire-wheeling then a healthy dab of loctite n bobs your uncle and patsy's your auntie

[Bristol_Jer]

When I looked on the parts list on BMWfans, it gave the M30 slave cylinder as being the same as an e30 318iS, but not as an M20 one?

[ImysE30]

Maybe they are all interchangeable

Have you fitted an M30 one?

[Bristol_Jer]

Not yet Imy, I was planning to though, it's on my ever growing shopping list!

[ImysE30]

Ah okay, my shopping list is huge and expensive this month

[Bristol_Jer]

Ah okay, my shopping list is huge and expensive this month

I know the feeling mate!

[ImysE30]

Ah okay, my shopping list is huge and expensive this month

I know the feeling mate!

But I keep saying to myself, it'll all be worth it

[chu346]

What are the torque settings for these bolts?