Thanks, Goosie
expansion tank cleaning?
Moderator: martauto
-
goosiegander
- Zonegoose
- Posts: 2544
- Joined: Sun Nov 19, 2006 11:00 pm
- Location: East Anglia
Best product/method for making the coolant expansion/window washer reservoir tanks look like new again?
Thanks, Goosie
Thanks, Goosie
-
march109
- Engaged to the E30 Zone

- Posts: 6632
- Joined: Sun Aug 20, 2006 11:00 pm
- Location: Bournemouth
buy a new one, they arn't expensive.
325i Tech 1 Touring, breaking.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
-
goosiegander
- Zonegoose
- Posts: 2544
- Joined: Sun Nov 19, 2006 11:00 pm
- Location: East Anglia
fair... but i do actually like cleaning things up, call me a madman... 
-
eko
- Old timer
- Posts: 11531
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: South Devon
Big bucket,pop some Daz ultra(or similar) in there,fill with water and chuck the item in there.
Leave for 24hrs or so and remove and rinse!
Worked for me
Leave for 24hrs or so and remove and rinse!
Worked for me

-
goosiegander
- Zonegoose
- Posts: 2544
- Joined: Sun Nov 19, 2006 11:00 pm
- Location: East Anglia
cool ill give that a try!
-
sam325is
- E30 Zone Addict

- Posts: 2002
- Joined: Thu Jul 06, 2006 11:00 pm
- Location: Cheltenham
did they come out looking new eko?
-
eko
- Old timer
- Posts: 11531
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: South Devon
Wouldnt say they came out looking like brand new but certainly the cleanest `old` ones ive ever seen!sam325is wrote:did they come out looking new eko?
Carb cleaner works a treat on the stubborn parts

-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
eko
- Old timer
- Posts: 11531
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: South Devon
lol youve been in the kitchen cupboard too thenChris-W wrote:Fairy Power spray - smashing stuff.
Question is did you get caught

-
goosiegander
- Zonegoose
- Posts: 2544
- Joined: Sun Nov 19, 2006 11:00 pm
- Location: East Anglia
i just did
lol!
-
march109
- Engaged to the E30 Zone

- Posts: 6632
- Joined: Sun Aug 20, 2006 11:00 pm
- Location: Bournemouth
For stubborn marks I like the citrus bbq cleaner from the same people that do WD40, comes in the same sort of can, but in lime green. Dissolves any crap and cleans my engine bay and bbq great.
Though I'd rather buy a new one.
Though I'd rather buy a new one.
325i Tech 1 Touring, breaking.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
They are approx £30 a piece new, I bought an expansion tank, but I couldnt part with the cash for a washer bottle as I knew I would forget to top the screen cleaner up and it would go mouldy again.
I think I filled mine with hot water and toilet cleaner/limescale remover overnight, worked well but it has since had several bouts of mould induced leprosy
I think I filled mine with hot water and toilet cleaner/limescale remover overnight, worked well but it has since had several bouts of mould induced leprosy
-
beardymat
- E30 Zone Squatter

- Posts: 1979
- Joined: Tue Jun 14, 2005 11:00 pm
- Location: sheffield, city of steel, and rust apparently
i fitted new bottles to mine so you can imagine my dissapointment when the engine repeatedly filled the expansion bottle with murky brown water despite numerous flushings with clean water and a proper engine flush plus 3 lots of fresh anti freeze
probably had something to do with the car standing for @ two years with no rad and a dribble of water still in the block which i found when changing the timing belt and water pump in prep for recomissioning the engine. which id found the thread about the drain plug on the block a little earlier.
probably had something to do with the car standing for @ two years with no rad and a dribble of water still in the block which i found when changing the timing belt and water pump in prep for recomissioning the engine. which id found the thread about the drain plug on the block a little earlier.
No longer self employed but still available for welding duties.
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
TFR is a wonderful cooling system flush 
-
sam325is
- E30 Zone Addict

- Posts: 2002
- Joined: Thu Jul 06, 2006 11:00 pm
- Location: Cheltenham
sweet im going to get 2 new bottles then. becuase my coolant isnt murky and brown as my engine is rebuilt.new water pipes etc. might throw a new rad in just for good measure.
cant say ive evey had mold in my washer bottles either
cant say ive evey had mold in my washer bottles either
-
clubfx2
- E30 Zone Newbie

- Posts: 222
- Joined: Sun Aug 07, 2005 11:00 pm
- Location: Surrey
I've cleaned mine up using sea sand and soapy solution. Came out like new.
Regards
Clyde
-------------------------------
Go everywhere sideways...

Clyde
-------------------------------
Go everywhere sideways...

-
mikec
- E30 Zone Newbie

- Posts: 10
- Joined: Fri Sep 08, 2006 11:00 pm
best way to clean tank after head gasket failure is to flush with water,then fill and add some washing powder,run for a few days then flush and fill with water/anti freeze mix.old trade trick!
-
grantfk10
- E30 Zone Meets/Events Team

- Posts: 2926
- Joined: Mon Jan 17, 2005 11:00 pm
- Location: UFOland, Central Scotland
What, run the car with washing powder in the cooling system? Sounds weird, but if it works without undue problems - go for it. 
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
TFR did the job on my cooling system. 2 years on after a cracked head and it's still completely clear! do this before cleaning the tank!
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
Chris
- E30 Zone Camper

- Posts: 1093
- Joined: Thu Apr 07, 2005 11:00 pm
- Location: Clacton, Essex
Are the water pump bearings exposed to the coolant on E30 engines?
Just curious as My little Suzuki SJ410 blew a head gasket a year or so ago and i'm still getting manky gloop out the expansion tank, because i've always been scared to put anything nasty in there to clean it all out because i put a new water pump in and was always scared of degreasing any bearings etc.
Just curious as My little Suzuki SJ410 blew a head gasket a year or so ago and i'm still getting manky gloop out the expansion tank, because i've always been scared to put anything nasty in there to clean it all out because i put a new water pump in and was always scared of degreasing any bearings etc.

-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
nope. they're sealed. usually when the seals fail, the bearings fail just afterwards. a giveaway sign is a noisy pump that's weeping coolant throigh the front.
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
mine went in the dish washer (whilst mum was out) and it come up like new 

Considering Selling the Cabby, looks like its gonna go
-
DCDC
- E30 Zone Newbie

- Posts: 71
- Joined: Thu Jun 19, 2008 11:00 pm
C-LIT BANG AND THE DIRT IS GONE !!!C-LIT BANG AND THE DIRT IS GONE !!!
C-LIT BANG AND THE DIRT IS GONE !!!
C-LIT BANG AND THE DIRT IS GONE !!!
C-LIT BANG AND THE DIRT IS GONE !!!
LOL
ALWAYS WANTED TO DO THAT
REGARDS
DC
C-LIT BANG AND THE DIRT IS GONE !!!
C-LIT BANG AND THE DIRT IS GONE !!!
C-LIT BANG AND THE DIRT IS GONE !!!
LOL
ALWAYS WANTED TO DO THAT
REGARDS
DC
-
e34Murphy
- E30 Zone Newbie

- Posts: 28
- Joined: Tue Jul 01, 2008 11:00 pm
- Location: Chelmsford, Essex
i will be giving the m30 headertank a clean soon as not only have i got some mirky bornw coolant now (not been change in a year or so i doubt) and the bottle is so dirty you cant see where the coolant is on the min and max indicator
-
Gibson
- Old Ford Deviant
- Posts: 1079
- Joined: Mon Oct 15, 2007 11:00 pm
- Location: Hampshire
Ive been threatening this on the E-dirtysix for a while now but i blew radiator to hell last week so now would seem like a good time....

-
goosiegander
- Zonegoose
- Posts: 2544
- Joined: Sun Nov 19, 2006 11:00 pm
- Location: East Anglia
finally bit the bullit and purchased a new expansion tank from bmw 



