manderal bends

Post Mon Sep 17, 2007 6:10 pm

anyone know where i can get stainless steel 90 degree 3" manderal bends from? my local shop said 45 quid each!
thought i might be able to get them a bit cheaper?
got quoted 600 pound for the exhaust an thats just strait out the wing with one resinator!

Post Mon Sep 17, 2007 6:19 pm

Demon Tweeks?

Post Mon Sep 17, 2007 6:21 pm

i paid Ã‚£8 each for my 2" ones from a GK's...

www.jetex.co.uk try there..

Post Mon Sep 17, 2007 6:28 pm

Are they stainless Jhonno? Wondered who'd scabbed them all from the one at the bottom of North Hill.

Jai

Post Mon Sep 17, 2007 6:32 pm

They not got more in?!

I need to go and get some more straight pipe off them..

Post Mon Sep 17, 2007 6:50 pm

I got mine from Jetex, but I dont think they are mandrel bent. That said, there isnt a huge amount of distortion on either the 45 or 90 degree bends.

Post Mon Sep 17, 2007 6:58 pm

http://www.milneroffroad.com/PIPE.HTM

Is where I've been getting stuff. Bit more reasonable at Ã‚£18ish each

Post Mon Sep 17, 2007 7:44 pm

cheers, 600 quid is way too steep for an exhaust thats only about 2 foot long!!

Post Mon Sep 17, 2007 8:35 pm

anyone know where i can get a small 3 inch resinator from to keep the noise down a bit??

Post Mon Sep 17, 2007 10:59 pm

Can just make one yourself from that site by the looks of it.

I scratch build a rear silencer for mine from sheet, perforated tube and glass wadding

Post Mon Sep 17, 2007 11:12 pm

it needs to be 4" round max to fit inbetween the turbo and inner arch, the exhaust exit will be at the front of the drivers side front wing

Post Tue Sep 18, 2007 6:03 pm

anyone know of a small muffler???

Post Tue Sep 18, 2007 9:57 pm

again.. www.jetex.co.uk have a look

Post Tue Sep 18, 2007 10:00 pm

The jetex range is quite good. They do a nice selection of silencers and are not silly money.

Post Tue Sep 18, 2007 10:02 pm

O/T but went into colchester gk's today Dave.. Got a bit of a cheeky discount on exhaust piping as they only had the longer length of straight pipe

Post Tue Sep 18, 2007 10:06 pm

Discount! Christ that's unheard of.

Who served you? Geoff (old bloke with glasses)

Post Tue Sep 18, 2007 10:09 pm

Na matey who has your old council chariot..

Post Tue Sep 18, 2007 10:16 pm

Ahh that peenarse

Good old boy, Glad to hear he sorted you out.

Post Tue Sep 18, 2007 10:35 pm

Jhonno wrote:again.. www.jetex.co.uk have a look

cheers for that mate but they dont make a silencer small enough

Post Tue Sep 18, 2007 10:38 pm

Could you not use a small motorcycle one, or would the bore be too small?

Post Tue Sep 18, 2007 11:03 pm

my downpipe is 3" so think it will need to be at least that big, as the whole system is only a couple of foot long, comes out the turbo does a u turn and comes out the side of the wing at the front, so i need a silencer that will fit under the bonnet inbetween the turbo and inner wing

Post Wed Sep 19, 2007 2:07 pm

If you can find a supply of 4" diameter tube, you could easily make your own dude!

Can make it exactly the right length that way too

Post Wed Sep 19, 2007 3:58 pm

cheers for the website mate i ordered it an it was here this mornin

Post Wed Sep 19, 2007 4:20 pm

i wil have silencer for sale soon

from jetex its 3 inch in and 2- 2.5 inch out.

i want a different one as this one is small.

pm me if you want it?