


The result of me being lazy and only getting the rear springs done today.
100mm drop front, standard rears, on steels with hubcaps.....yeah thats how I roll.
Moderator: martauto



duke wrote: I could throw a spastic round a corner with better precision


duke wrote: I could throw a spastic round a corner with better precision


duke wrote: I could throw a spastic round a corner with better precision

why the change of springs then?munky30 wrote:They're AG springs.
100mm front 85mm rear.
I'm not stripping it, I'm fixing it.
The lights failed the mot too

duke wrote: I could throw a spastic round a corner with better precision




duke wrote: I could throw a spastic round a corner with better precision




If your Corsa rolls like a jelly when your doing donuts in Tesco's car park - steal a mobile and phone us first


Bouncy, but thats just because the springs are cut. Handles pretty well though which surprised me. NO body roll... mainly cos its on the bumpstops. Drifts nicely too.aceraf wrote:your car did look sweet with that ride height....what was it like on the roads?
Only on those speedbumps that are just a lump in the centre of the lane, but I can stil get over them by putting two wheels over the middle and going slowly. I keep an eye out for raised manhole covers and big rocks though, and have a spare sump.any scraping?
The wheels in my sig are 17's, sits perfectly on them. BUT they're the wrong offset, sit too far inside the arch by about half an inch. No rubbing issues at all. They're also an inch smaller in overall diameter than the standard ones.i want my car low aswell....but i'm going to be putting 17's on it....the lower profile on 17's should mean the same ride height....but i want my back wheel under the arch, and the front one atleast filling the gap nicely!
Nope..... Havent taken any pics for ages and al the old ones had the wheels turned. These ones show the drop pretty well though.you got any pics of your with the front wheel straight so i can see what your drop looked like?



no, but only because of the wrong offset, at full lock the fronts rub on the strut top. Makes a horrible squeaking noise. With theses standard wheels on there's no rubbing and I can go full lock.also, were you still able to do full lock?
duke wrote: I could throw a spastic round a corner with better precision