Comedy ride height.

Show off your pride and joy here

Moderator: martauto

munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Sat Apr 14, 2007 7:38 pm

Image
Image
Image

The result of me being lazy and only getting the rear springs done today.

100mm drop front, standard rears, on steels with hubcaps.....yeah thats how I roll. :cool: :roll:
Image
duke wrote: I could throw a spastic round a corner with better precision
maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Sat Apr 14, 2007 7:42 pm

I like the look :o

Not sure about the wheels
Image
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Sat Apr 14, 2007 7:46 pm

If it was on 5 slot mags, with big fat ones out the back and hoosier white text tyres, it would look bad-ass.

Its not though, its on 14" steels....

But they're oem, as are the hubcaps (ish), so they must be good. :roll:
Image
duke wrote: I could throw a spastic round a corner with better precision
aceraf
E30 Zone Addict
E30 Zone Addict
Posts: 3005
Joined: Tue Feb 13, 2007 11:00 pm
Location: Derby

Post Sat Apr 14, 2007 9:00 pm

what...???? 8O

that looks funny :lol:

are your 100mm springs genuine, or home made cutting jobs?

Didn't waste no time stripping the car did you??? :D
**LPG E39 Spares or Repairs for Sale**
Image
Breaking 325i Touring
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Sat Apr 14, 2007 9:03 pm

They're AG springs.

100mm front 85mm rear.

I'm not stripping it, I'm fixing it.

The lights failed the mot too :wink:
Image
duke wrote: I could throw a spastic round a corner with better precision
aceraf
E30 Zone Addict
E30 Zone Addict
Posts: 3005
Joined: Tue Feb 13, 2007 11:00 pm
Location: Derby

Post Sat Apr 14, 2007 9:04 pm

munky30 wrote:They're AG springs.

100mm front 85mm rear.

I'm not stripping it, I'm fixing it.

The lights failed the mot too :wink:
why the change of springs then?
**LPG E39 Spares or Repairs for Sale**
Image
Breaking 325i Touring
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Sat Apr 14, 2007 9:09 pm

AG... Angle Grinder :wink:

cut springs = MOT fail... hence having a spare set of original ones to put in for the retest.
Image
duke wrote: I could throw a spastic round a corner with better precision
aceraf
E30 Zone Addict
E30 Zone Addict
Posts: 3005
Joined: Tue Feb 13, 2007 11:00 pm
Location: Derby

Post Sat Apr 14, 2007 11:25 pm

Do you know of anywhere that does 80mm lowering springs for the e30?

there's a set on ebay, but it's just the rears....so have 2 questions...

1. do anyone make 80mm (as i've never heard of anyone doing more than 70 unless it's custom made)
2. can you buy the the fronts on a 80mm drop aswell???
The person selling the 80mm one's is in Derby aswell, so i can collect, and they're pretty cheap too!

oh, and by the way, you gona be keeping your car on stock springs, or is it just for the mot?
**LPG E39 Spares or Repairs for Sale**
Image
Breaking 325i Touring
aceraf
E30 Zone Addict
E30 Zone Addict
Posts: 3005
Joined: Tue Feb 13, 2007 11:00 pm
Location: Derby

Post Sat Apr 14, 2007 11:26 pm

just re-read your last post.....i suppose that means your AG springs are going back in after! :D
**LPG E39 Spares or Repairs for Sale**
Image
Breaking 325i Touring
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Sat Apr 14, 2007 11:46 pm

Not sure if they'll be going back in. Depends how energetic I feel after the retest.

I'm picking up a set of springs from someone that look like they're about 60-70mm in a few weeks and it seems pointless putting these back in only to replace them a few weeks later.

If you want 80mm springs get in touch with these guys. http://www.coilsprings.co.uk/

You can send them your standard springs and for £150 they will make a set to whatever height you want.

I'll probably end up sending the ones I'm getting off to them to have them dropped those extra few mm.

I measured the drop on my cut springs against a standard car and it was 85mm rear and 100 front so thats what I want, but with springs that are legal :roll:
Image
duke wrote: I could throw a spastic round a corner with better precision
aceraf
E30 Zone Addict
E30 Zone Addict
Posts: 3005
Joined: Tue Feb 13, 2007 11:00 pm
Location: Derby

Post Sun Apr 15, 2007 9:25 am

your car did look sweet with that ride height....what was it like on the roads?

any scraping?

i want my car low aswell....but i'm going to be putting 17's on it....the lower profile on 17's should mean the same ride height....but i want my back wheel under the arch, and the front one atleast filling the gap nicely!

you got any pics of your with the front wheel straight so i can see what your drop looked like?

also, were you still able to do full lock?
**LPG E39 Spares or Repairs for Sale**
Image
Breaking 325i Touring
drifty325i
E30 Zone Regular
E30 Zone Regular
Posts: 647
Joined: Tue Jan 11, 2005 11:00 pm
Location: Rangiora, New Zealand

Post Sun Apr 15, 2007 9:29 am

lol funny, looks kinda cool tho
aceraf
E30 Zone Addict
E30 Zone Addict
Posts: 3005
Joined: Tue Feb 13, 2007 11:00 pm
Location: Derby

Post Sun Apr 15, 2007 9:34 am

If your Corsa rolls like a jelly when your doing donuts in Tesco's car park - steal a mobile and phone us first
:lol:

:rofl:

that's off that link you added!!! :lol:
**LPG E39 Spares or Repairs for Sale**
Image
Breaking 325i Touring
riklusby
E30 Zone Regular
E30 Zone Regular
Posts: 489
Joined: Mon Feb 05, 2007 11:00 pm
Location: Scotland

Post Sun Apr 15, 2007 9:52 am

Hey munky, looks like youve got the tourer ready to borrow the safe from the local bank :D
munky30
100% Pure Council
Posts: 5388
Joined: Thu Jan 18, 2007 11:00 pm
Location: my own little world

Post Sun Apr 15, 2007 10:58 am

aceraf wrote:your car did look sweet with that ride height....what was it like on the roads?
Bouncy, but thats just because the springs are cut. Handles pretty well though which surprised me. NO body roll... mainly cos its on the bumpstops. Drifts nicely too.
any scraping?
Only on those speedbumps that are just a lump in the centre of the lane, but I can stil get over them by putting two wheels over the middle and going slowly. I keep an eye out for raised manhole covers and big rocks though, and have a spare sump.
i want my car low aswell....but i'm going to be putting 17's on it....the lower profile on 17's should mean the same ride height....but i want my back wheel under the arch, and the front one atleast filling the gap nicely!
The wheels in my sig are 17's, sits perfectly on them. BUT they're the wrong offset, sit too far inside the arch by about half an inch. No rubbing issues at all. They're also an inch smaller in overall diameter than the standard ones.
you got any pics of your with the front wheel straight so i can see what your drop looked like?
Nope..... Havent taken any pics for ages and al the old ones had the wheels turned. These ones show the drop pretty well though.

Image
Image
Image
also, were you still able to do full lock?
no, but only because of the wrong offset, at full lock the fronts rub on the strut top. Makes a horrible squeaking noise. With theses standard wheels on there's no rubbing and I can go full lock.

ps, that site cracks me up, they do a good job but the site is fooking priceless.

Rik - :lol: All I need now is a jcb to dig the cashpoint out of the wall and I'll be ready :twisted:
Image
duke wrote: I could throw a spastic round a corner with better precision
snoops
Major Helmet
Posts: 2828
Joined: Fri Nov 03, 2006 11:00 pm
Location: Time running out for me on the Zone

Post Sun Apr 15, 2007 3:24 pm

lol that height will come in handy if you plan on letting some big pople in the back