Picked up a 2nd BMW but need help figuring it out

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
halonine
E30 Zone Newbie
E30 Zone Newbie
Posts: 4
Joined: Tue Feb 13, 2007 11:00 pm

Post Wed Feb 14, 2007 1:51 am

Im new to the Zone.

i have a 1985 318i and it runs pretty good
well i herd of a 87 325 2dr that had no clutch that i could pick up real cheap 210,000 miles
so i went and checked it out it wasnt to bad body has no rust interior needs work but thats not hard. trunk floor is a little rusted on the sides but eh new sheet metal no problem so i think its $400 well spent!!

any way for the help i need......ok i didnt get a key with it so i popped off the steering coloum popped off the back of the starter to see if it would start well the battery i didnt feel was charged enoughf so it wouldnt turn over but i got power to the window so i could roll them all the way up yay!!! so i charged the battery at work and when i got it hooked up and went to turn it over and nothing it makes a whirring sound i think its the starter ... its a loud whirring sound. sounds like a fan but im 90% its the starter

so the engine wont turn over what should i start checking? scince it doesnt turn over i cant check spark i put some fuel in it but it was on empty? its a new battery didnt look like the wireing was messed up at all... batt is located in the trunk.. but i havent check fuses... kinda dark when i get home.......so everything turns on lights inside heater fan blinkers work..


please give me some hints so i can get this beast running
smithy318i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5797
Joined: Thu Apr 28, 2005 11:00 pm
Location: Tyne & Wear

Post Wed Feb 14, 2007 2:09 am

Possibly worn starter motor or ring gear. Have you tried tow starting it ?
Also without a key you will have difficulty steering.

And Welcome to the Zone.
Image
User avatar
halonine
E30 Zone Newbie
E30 Zone Newbie
Posts: 4
Joined: Tue Feb 13, 2007 11:00 pm

Post Wed Feb 14, 2007 2:50 am

i have not tryed to pull start it that will be a task for tomarrow ill let you know what happenes thanks!!!
jamesh1977
BEWARE Zone Thief
Posts: 458
Joined: Thu Apr 27, 2006 11:00 pm
Location: central scotland

Post Wed Feb 14, 2007 3:02 am

i would say the starter isint ingaging the ring gear but if its no clutch it wont pull start either. try removing the starter and testing it with a battery while its removed to make sure its throwing out to meet the ring gear if not give it a soak and clean it up
Image
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Wed Feb 14, 2007 9:08 am

Definitely starter pinion not engaging. May be just a result of sitting around unused.
Good smack on the motor casing with a 2lb hammer is the first thing I'd try.
Martinaston
E30 Zone Addict
E30 Zone Addict
Posts: 3749
Joined: Mon Mar 14, 2005 11:00 pm
Location: London

Post Wed Feb 14, 2007 10:37 am

You say it hasn't got a clutch, is it worn out ?, or missing altogether along with the flywheel.
There is NO nucleus.
User avatar
halonine
E30 Zone Newbie
E30 Zone Newbie
Posts: 4
Joined: Tue Feb 13, 2007 11:00 pm

Post Thu Feb 15, 2007 1:29 pm

Martinaston wrote:You say it hasn't got a clutch, is it worn out ?, or missing altogether along with the flywheel.
well when i bought it they said that the guy who had it before burnt out the clutch its in there still but it needs a new one i work at a shop so i ca get the parts at cost so i ordered a new starter didnt run me to much i got away real cheap list was 217.99 for a reman but im getting it for 127.41 so thats not to bad thats why i like working here... i asked my mechanic if he thinks it the problem he said it sounds like it but hes not sure ( he's an old school muscle car guy-- he knows nothing about the good cars!!!)

well as soon as i switch out the starter ill let you guys know what happened!!
User avatar
halonine
E30 Zone Newbie
E30 Zone Newbie
Posts: 4
Joined: Tue Feb 13, 2007 11:00 pm

Post Mon Feb 19, 2007 10:32 pm

well when i got my new starter and i had time today to put it in so when i started to remove some hoses to replace it i noticed that hey the starter thats on the car isnt bolted up!!!! and there are no bolts to be found so now i need to figure that out if anyone knows what size to use and thred pitch that would be helpfull im thinking 12mm but i might be wrong
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Mon Feb 19, 2007 10:45 pm

They are a standard 10mm thread, but the correct bolts have male torx heads. Not sure why without going and having a look, but this may be because there isn't room for a standard hex head to seat on the gearbox side.
They also have thin plain steel washers under their heads. Can't see they're essential on these bolts which have nuts, but for the rest of the bell housing bolts, they will take root and me near impossible to unscrew if they are missed out.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Mon Feb 19, 2007 10:48 pm

Brianmoooore wrote:Definitely starter pinion not engaging. .
Not surprising if the bolts are missing!
It's possible this is something to do with the failed clutch, and your original motor is perfectly serviceable.