Im new to the Zone.
i have a 1985 318i and it runs pretty good
well i herd of a 87 325 2dr that had no clutch that i could pick up real cheap 210,000 miles
so i went and checked it out it wasnt to bad body has no rust interior needs work but thats not hard. trunk floor is a little rusted on the sides but eh new sheet metal no problem so i think its $400 well spent!!
any way for the help i need......ok i didnt get a key with it so i popped off the steering coloum popped off the back of the starter to see if it would start well the battery i didnt feel was charged enoughf so it wouldnt turn over but i got power to the window so i could roll them all the way up yay!!! so i charged the battery at work and when i got it hooked up and went to turn it over and nothing it makes a whirring sound i think its the starter ... its a loud whirring sound. sounds like a fan but im 90% its the starter
so the engine wont turn over what should i start checking? scince it doesnt turn over i cant check spark i put some fuel in it but it was on empty? its a new battery didnt look like the wireing was messed up at all... batt is located in the trunk.. but i havent check fuses... kinda dark when i get home.......so everything turns on lights inside heater fan blinkers work..
please give me some hints so i can get this beast running
Picked up a 2nd BMW but need help figuring it out
Moderator: martauto
-
smithy318i
- Engaged to the E30 Zone

- Posts: 5797
- Joined: Thu Apr 28, 2005 11:00 pm
- Location: Tyne & Wear
Possibly worn starter motor or ring gear. Have you tried tow starting it ?
Also without a key you will have difficulty steering.
And Welcome to the Zone.
Also without a key you will have difficulty steering.
And Welcome to the Zone.

-
halonine
- E30 Zone Newbie

- Posts: 4
- Joined: Tue Feb 13, 2007 11:00 pm
i have not tryed to pull start it that will be a task for tomarrow ill let you know what happenes thanks!!!
-
jamesh1977
- BEWARE Zone Thief
- Posts: 458
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: central scotland
i would say the starter isint ingaging the ring gear but if its no clutch it wont pull start either. try removing the starter and testing it with a battery while its removed to make sure its throwing out to meet the ring gear if not give it a soak and clean it up

-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Definitely starter pinion not engaging. May be just a result of sitting around unused.
Good smack on the motor casing with a 2lb hammer is the first thing I'd try.
Good smack on the motor casing with a 2lb hammer is the first thing I'd try.
-
Martinaston
- E30 Zone Addict

- Posts: 3749
- Joined: Mon Mar 14, 2005 11:00 pm
- Location: London
You say it hasn't got a clutch, is it worn out ?, or missing altogether along with the flywheel.
There is NO nucleus.
-
halonine
- E30 Zone Newbie

- Posts: 4
- Joined: Tue Feb 13, 2007 11:00 pm
well when i bought it they said that the guy who had it before burnt out the clutch its in there still but it needs a new one i work at a shop so i ca get the parts at cost so i ordered a new starter didnt run me to much i got away real cheap list was 217.99 for a reman but im getting it for 127.41 so thats not to bad thats why i like working here... i asked my mechanic if he thinks it the problem he said it sounds like it but hes not sure ( he's an old school muscle car guy-- he knows nothing about the good cars!!!)Martinaston wrote:You say it hasn't got a clutch, is it worn out ?, or missing altogether along with the flywheel.
well as soon as i switch out the starter ill let you guys know what happened!!
-
halonine
- E30 Zone Newbie

- Posts: 4
- Joined: Tue Feb 13, 2007 11:00 pm
well when i got my new starter and i had time today to put it in so when i started to remove some hoses to replace it i noticed that hey the starter thats on the car isnt bolted up!!!! and there are no bolts to be found so now i need to figure that out if anyone knows what size to use and thred pitch that would be helpfull im thinking 12mm but i might be wrong
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
They are a standard 10mm thread, but the correct bolts have male torx heads. Not sure why without going and having a look, but this may be because there isn't room for a standard hex head to seat on the gearbox side.
They also have thin plain steel washers under their heads. Can't see they're essential on these bolts which have nuts, but for the rest of the bell housing bolts, they will take root and me near impossible to unscrew if they are missed out.
They also have thin plain steel washers under their heads. Can't see they're essential on these bolts which have nuts, but for the rest of the bell housing bolts, they will take root and me near impossible to unscrew if they are missed out.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Not surprising if the bolts are missing!Brianmoooore wrote:Definitely starter pinion not engaging. .
It's possible this is something to do with the failed clutch, and your original motor is perfectly serviceable.
