Chasing air leaks

Need technical Q/A then you're in the right place

Moderator: martauto

Cyruz
E30 Zone Newbie
E30 Zone Newbie
Posts: 219
Joined: Sat Oct 15, 2005 11:00 pm
Location: Bournemouth

Post Fri Feb 16, 2007 6:58 pm

Since I got my car running a couple of weeks ago it's been running rich and has trouble startring from cold. I'm guessing it's because petrol is washing the plugs and they are having trouble sparking. It also searches for idle when cold and then still sticks at high rpm. When reved the engine drops before picking up and almost stalls, once warm it seems much better though.

I've changed the AFM, inlet manifold gaskets and the rubber boot from the TB to AFM. I've also noticed that there is a threaded type valve thing on top of the throttle body, does this need to be blocked to stop air flow, it's hard to tell because the car was running rich when I first got it, so I can't trace my steps back incase it was me that buggered something. I've also replaced the ICV pipework and ICV itself which helped quite a lot but still not complete.

It's just been serviced with new belts, oil, coolant and plugs. Replaced lots of senders and gasket/seals too. It was doing this before the service also. Is there anything else that I'm missing out here, don't really want to send it to a garage if it's a case of a 99p seal or something and have to pay garage rates.
Image
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Fri Feb 16, 2007 9:19 pm

Cyruz wrote:I've also noticed that there is a threaded type valve thing on top of the throttle body
??????? No idea what this is, but there should be no open holes into the inlet manifold.
What engine?
Cyruz
E30 Zone Newbie
E30 Zone Newbie
Posts: 219
Joined: Sat Oct 15, 2005 11:00 pm
Location: Bournemouth

Post Sat Feb 17, 2007 3:20 pm

Damn it everytime! It's a 2.5 m20 lump. The thread thing isn't important as it looks to control the throttle and manually adjust the idle. I think I'm going to bite the bullet and take it to a garage (not been inside one in 3 years). Now just need to find a semi-decent one. Any recommendations in the bournemouth area?
Image
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Feb 17, 2007 6:04 pm

Cyruz wrote:. The thread thing isn't important as it looks to control the throttle and manually adjust the idle.
It is NOT a manual idle control, and only has one correct position - where BMW set it at the factory. Do not touch!
Cyruz
E30 Zone Newbie
E30 Zone Newbie
Posts: 219
Joined: Sat Oct 15, 2005 11:00 pm
Location: Bournemouth

Post Sat Feb 17, 2007 7:08 pm

No worries brian, I figured not to adjust it, let the ICV control the idle ;)
Image