Since I got my car running a couple of weeks ago it's been running rich and has trouble startring from cold. I'm guessing it's because petrol is washing the plugs and they are having trouble sparking. It also searches for idle when cold and then still sticks at high rpm. When reved the engine drops before picking up and almost stalls, once warm it seems much better though.
I've changed the AFM, inlet manifold gaskets and the rubber boot from the TB to AFM. I've also noticed that there is a threaded type valve thing on top of the throttle body, does this need to be blocked to stop air flow, it's hard to tell because the car was running rich when I first got it, so I can't trace my steps back incase it was me that buggered something. I've also replaced the ICV pipework and ICV itself which helped quite a lot but still not complete.
It's just been serviced with new belts, oil, coolant and plugs. Replaced lots of senders and gasket/seals too. It was doing this before the service also. Is there anything else that I'm missing out here, don't really want to send it to a garage if it's a case of a 99p seal or something and have to pay garage rates.
Chasing air leaks
Moderator: martauto
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
??????? No idea what this is, but there should be no open holes into the inlet manifold.Cyruz wrote:I've also noticed that there is a threaded type valve thing on top of the throttle body
What engine?
-
Cyruz
- E30 Zone Newbie

- Posts: 219
- Joined: Sat Oct 15, 2005 11:00 pm
- Location: Bournemouth
Damn it everytime! It's a 2.5 m20 lump. The thread thing isn't important as it looks to control the throttle and manually adjust the idle. I think I'm going to bite the bullet and take it to a garage (not been inside one in 3 years). Now just need to find a semi-decent one. Any recommendations in the bournemouth area?

-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
It is NOT a manual idle control, and only has one correct position - where BMW set it at the factory. Do not touch!Cyruz wrote:. The thread thing isn't important as it looks to control the throttle and manually adjust the idle.
-
Cyruz
- E30 Zone Newbie

- Posts: 219
- Joined: Sat Oct 15, 2005 11:00 pm
- Location: Bournemouth
No worries brian, I figured not to adjust it, let the ICV control the idle ;)

