E36 Rack Conversion

Need technical Q/A then you're in the right place

Moderator: martauto

Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Thu Feb 15, 2007 7:40 pm

Going to have replace my steering rack fairly soon i reckon so have been considering this option.

Would i have any clearance issues on an M42 as i inderstand once the spacer is on the UJ?

I also want to double check whick track rod end you use, from what i've read the E36 ones join the E30 arms fine?

Is there a big noticeable from this rack to the E30s?

Is it going to cost me much more than simply buying a new E30 rack?

Cheers
Dave
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
Andy335Touring
Married to the E30 Zone
Married to the E30 Zone
Posts: 7144
Joined: Sun Jan 09, 2005 11:00 pm
Location: Long Eaton,Nottingham

Post Thu Feb 15, 2007 8:30 pm

Templ8e30
E30 Zone Addict
E30 Zone Addict
Posts: 2801
Joined: Mon Jan 10, 2005 11:00 pm
Location: Ashton-under-Lyne, Lancashire

Post Thu Feb 15, 2007 10:00 pm

The E36 rack makes a massive difference to the steering, feels a lot quicker and bags more feel.

One of the best mods I've done.

I believe you'll have bother with the coupling fouling the manifold on the iS. I had this problem with my BTB 6 branch.

I got around the fouling issue by cutting off the rack mounts and welding them back on 10mm further over to the drivers side. This gave more right lock than left lock so made up a 10mm thick lock-stop to fit to the passenger side of the rack to even it all up.

The E36 rack feels cack in my wife's E36 ! just like the E30 rack, the distance between the track rod end balljoint and the outer wishbone balljoint is greater on an E36. This means that the E30 wheels move further for the same turns on the steering wheel than the E36.

Cheers,

Iain T
Image
2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Fri Feb 16, 2007 10:51 am

iain, which rack did you use? what E36 did you get it out of?
Image
Templ8e30
E30 Zone Addict
E30 Zone Addict
Posts: 2801
Joined: Mon Jan 10, 2005 11:00 pm
Location: Ashton-under-Lyne, Lancashire

Post Fri Feb 16, 2007 2:41 pm

E36 318i saloon was the donor :D

I used the original E30 pipework but bent the lines with a blowtorch and pipe bender to suit.

I didn't use the modified joint used in the zone article, I used a standard E36 joint cut down and welded with an E30 knuckle fitted to the top UJ. Looks much neater and retains the rubber disc.

Cheers,

Iain T
Image
2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
DRIFTBOY
E30 Zone Addict
E30 Zone Addict
Posts: 3131
Joined: Mon May 22, 2006 11:00 pm
Location: Kent

Post Fri Feb 16, 2007 2:47 pm

Z3 steering rack is even quicker again the going from E30 to E36! winkeye

And it uses all the same fittings.
Jeremy Clarkson wrote:...but it drives the front wheels. Theee wrooong wheels!
da4x4turbo wrote:I raced a vivaro on the motorway once in a 318is.... and lost!!!
ian332isport
E30 Zone Team Member
E30 Zone Team Member
Posts: 5380
Joined: Wed Dec 22, 2004 11:00 pm
Location: West Sussex

Post Fri Feb 16, 2007 3:29 pm

Templ8e30 wrote:I didn't use the modified joint used in the zone article, I used a standard E36 joint cut down and welded with an E30 knuckle fitted to the top UJ. Looks much neater and retains the rubber disc.
The modified joint described in the article also retains the rubber disc. Infact, the E36 rubber disc is a much stiffer item than the E30 one.

Ian.
If it aint broke - Modify it...
Templ8e30
E30 Zone Addict
E30 Zone Addict
Posts: 2801
Joined: Mon Jan 10, 2005 11:00 pm
Location: Ashton-under-Lyne, Lancashire

Post Fri Feb 16, 2007 4:27 pm

ian332isport wrote:
Templ8e30 wrote:I didn't use the modified joint used in the zone article, I used a standard E36 joint cut down and welded with an E30 knuckle fitted to the top UJ. Looks much neater and retains the rubber disc.
The modified joint described in the article also retains the rubber disc. Infact, the E36 rubber disc is a much stiffer item than the E30 one.

Ian.
So it does :o:

Cheers,

Iain T
Image
2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Fri Feb 16, 2007 4:46 pm

so if you fit the Z3 rack, then you dont have to do any mods?
Image
ian332isport
E30 Zone Team Member
E30 Zone Team Member
Posts: 5380
Joined: Wed Dec 22, 2004 11:00 pm
Location: West Sussex

Post Fri Feb 16, 2007 5:56 pm

stuartgallafant wrote:so if you fit the Z3 rack, then you dont have to do any mods?
As far as I'm aware, it's externally identical to the E36 rack, so the same things need to be done.

Ian.
If it aint broke - Modify it...
DRIFTBOY
E30 Zone Addict
E30 Zone Addict
Posts: 3131
Joined: Mon May 22, 2006 11:00 pm
Location: Kent

Post Fri Feb 16, 2007 6:37 pm

Yeah, sorry. I was rushing as I sneaked on to the zone at work!

Same fitting / mods as E36 rack.

Me and at least a couple of others on here did away with the rubber in the steering coupling. Doesn't seem to have any great negative effect.
Jeremy Clarkson wrote:...but it drives the front wheels. Theee wrooong wheels!
da4x4turbo wrote:I raced a vivaro on the motorway once in a 318is.... and lost!!!
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Sat Feb 17, 2007 11:00 am

Cheers for the comments guys, think i might leave it for now because of the clearance issues and wait until i have a different engine in there which will have a manifold designed to fit this conversion!

Andy that link didn't work mate, says "You are trying to access a restricted area", weird!
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Feb 17, 2007 1:40 pm

Kedge wrote:Andy that link didn't work mate, says "You are trying to access a restricted area", weird!
Works for me OK. Someone suggested in might be something to do with the logging in on e30zone.co.uk, and trying to access a e30zone.net link.
User avatar
odbod
E30 Zone Regular
E30 Zone Regular
Posts: 298
Joined: Mon May 08, 2006 11:00 pm
Location: leamington Spa

Post Sat Feb 17, 2007 3:13 pm

Schuey has a Z3 rack on his IS. It fits straight in with no UJ mods at all. It mounts in the 2 mounting holes further forwar than the standard mounts. Z3 is the quickest std rack you can get hold of.

http://www.e30zone.net/modules.php?name ... highlight=
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Sat Feb 17, 2007 3:50 pm

Got it working now Brian, think it was the .co.uk/.net problem!

That thread was a very interesting read, think i might go down that route! Just got to decide what to do about the spacers and whether to get some pipes made just incase i can't get mine in position!

Also anyone got any ideas if this would fit with an M52 conversion??

Cheers
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Feb 17, 2007 5:53 pm

Kedge wrote:Got it working now Brian, think it was the .co.uk/.net problem!

That thread was a very interesting read, think i might go down that route! Just got to decide what to do about the spacers and whether to get some pipes made just incase i can't get mine in position!

Also anyone got any ideas if this would fit with an M52 conversion??

Cheers
Will if you modify/make the exhaust manifold around the rack and shaft.