with out me pushing onto folded roof and trying to push button at same time,
folding roof probs
Moderator: martauto
-
blueyes
- E30 Zone Newbie

- Posts: 13
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: east sussex
please help. have just bought e30 318i soft top (electric roof) but were roof folds into trunk area its not sitting in correctly, so lid will not close
with out me pushing onto folded roof and trying to push button at same time,
with out me pushing onto folded roof and trying to push button at same time,
-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
does it fold properly..does it make any clicking noises and have you adjusted the two bowden cables that pull the locks down...look at the diagram in oem or the service manual in links
-
Rosc0PColtrane
- Married to the E30 Zone

- Posts: 9757
- Joined: Tue Mar 01, 2005 11:00 pm
- Location: With Ceiling cat, watching you masturbate.
Electric rooves are notoriously prone to breaking. I have a thread that is looking at roof adjustment. I'm not sure if it applies the leccy rooves. It could be a weak motor????
-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
that's why i asked about clicking noises, they (the middle motor) can strip its gears
it has also got to fold properly..that is why there is a wire in the leccy roofs over the drivers head..this keeps it aligned to the tensioners so it folds without having to get out of the car
the bowden cables pull the locks down which do the final stowing of the hood
it has also got to fold properly..that is why there is a wire in the leccy roofs over the drivers head..this keeps it aligned to the tensioners so it folds without having to get out of the car
the bowden cables pull the locks down which do the final stowing of the hood
-
Rosc0PColtrane
- Married to the E30 Zone

- Posts: 9757
- Joined: Tue Mar 01, 2005 11:00 pm
- Location: With Ceiling cat, watching you masturbate.
Dave, you are the encyclopaedia on all things soft top!!! You need a title in recognition!!
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
http://www.e30zone.co.uk/modules.php?na ... ic&t=49200
http://www.e30zone.co.uk/modules.php?na ... ic&t=57251
http://www.e30zone.co.uk/modules.php?na ... ic&t=45142
some light reading...
Now; let me think... a suitable name for DaveD Zone Soft-top... hmmmmm
how about Zone Ski-bum?
http://www.e30zone.co.uk/modules.php?na ... ic&t=57251
http://www.e30zone.co.uk/modules.php?na ... ic&t=45142
some light reading...
Now; let me think... a suitable name for DaveD Zone Soft-top... hmmmmm
how about Zone Ski-bum?
-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
now that sounds like a good idea...of to courmayuer in marchorangecurry wrote:http://www.e30zone.co.uk/modules.php?na ... ic&t=49200
http://www.e30zone.co.uk/modules.php?na ... ic&t=57251
http://www.e30zone.co.uk/modules.php?na ... ic&t=45142
some light reading...
how about Zone Ski-bum?
-
blueyes
- E30 Zone Newbie

- Posts: 13
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: east sussex
thanks for info,No motor does not make clicking noises..blatantarrogance wrote:Dave, you are the encyclopaedia on all things soft top!!! You need a title in recognition!!
are their adjstments that should be made to roof operation,ie cable
tension checks and if so how do i adjust.as on looking at roof mechanism
i see foding bars with banjo connections,the only cable i can see is the one
that closes the lid,and that cable comes from inside boot area,
-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
you can adjust the roof by screwing inor outparts no 2and 10
http://www.realoem.com/bmw/showparts.do ... g=54&fg=10
this adjusts the throw of the roof ..you might be able to get it to fold "tighter " using this
there should be 2 of part no 5 (one going to either side
http://www.realoem.com/bmw/showparts.do ... g=54&fg=10
these can be adjusted using the scews and if they are too long they will not pull the roof down completey...they could have stretched
the cable that comes from the boot only locks the boot when the flap is open...
there is not a cable that closes the lid??
Is the roof fabric stowed properly when it is closing and do you have the wire that goes through the hood
http://www.realoem.com/bmw/showparts.do ... g=54&fg=10
part 33
http://www.realoem.com/bmw/showparts.do ... g=54&fg=10
this adjusts the throw of the roof ..you might be able to get it to fold "tighter " using this
there should be 2 of part no 5 (one going to either side
http://www.realoem.com/bmw/showparts.do ... g=54&fg=10
these can be adjusted using the scews and if they are too long they will not pull the roof down completey...they could have stretched
the cable that comes from the boot only locks the boot when the flap is open...
there is not a cable that closes the lid??
Is the roof fabric stowed properly when it is closing and do you have the wire that goes through the hood
http://www.realoem.com/bmw/showparts.do ... g=54&fg=10
part 33
-
blueyes
- E30 Zone Newbie

- Posts: 13
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: east sussex
thanks for a speedy reply,will investigate and see what i can do,
the roof does seem to fold ok a little stiff on the rear plastic screen,and on inspection there is a wire/cable
that runs from front to back on both sides of the roof and on inspection all seems in good shape
will have to carry out inspection tomorrow as weather looks like its gonna rain
once again a BIG THANK YOU,youve made a woman with an e30 soft top very happy..
will reply tomorrow with results...
the roof does seem to fold ok a little stiff on the rear plastic screen,and on inspection there is a wire/cable
that runs from front to back on both sides of the roof and on inspection all seems in good shape
will have to carry out inspection tomorrow as weather looks like its gonna rain
once again a BIG THANK YOU,youve made a woman with an e30 soft top very happy..
will reply tomorrow with results...
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
ohhh dear now you've done it - they'll be all over a new female like bees round honey
(straightens tie, slicks down hair) if you'd like me to inspect your roof personally, East Sussex isn't too far away
(straightens tie, slicks down hair) if you'd like me to inspect your roof personally, East Sussex isn't too far away
-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
down boy down!!!orangecurry wrote:ohhh dear now you've done it - they'll be all over a new female like bees round honey![]()
(straightens tie, slicks down hair) if you'd like me to inspect your roof personally, East Sussex isn't too far away
The wires on both sides of the soft top are there to keep the edges of the roof stiff...nothing to do with the opening and closing
the roof has to be helped as much as possible..ie push it up as far as you can before you press the electrics
the roof should have a little pocket over your head running from side to side ,this is where the wire i keep talking about goes and it should have a little hook on one end that loops over the fabric tensioners that run on both sides front to back the other end goes between it.
let orange come over and help....
-
blueyes
- E30 Zone Newbie

- Posts: 13
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: east sussex
Daved,have looked at picture reff to wire that goes from left to right #3,and on looking at my roof am unable to
see as to were stored.should i be able to see it,like the wires/cables that run from front to back #8..
because on looking on inside of roof theres an empty sleeve as if something is suppose to go into it
any ideas..
see as to were stored.should i be able to see it,like the wires/cables that run from front to back #8..
because on looking on inside of roof theres an empty sleeve as if something is suppose to go into it
any ideas..
-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
is it above your head if so it is the tube part 33 goes into
http://www.realoem.com/bmw/showparts.do ... g=54&fg=10
the tensioners are the 2 flat pieces of fabric which are elasticised.... part 19
http://www.realoem.com/bmw/showparts.do ... g=54&fg=10
the tensioners are the 2 flat pieces of fabric which are elasticised.... part 19
-
blueyes
- E30 Zone Newbie

- Posts: 13
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: east sussex
thanks for that boyz,will need to buy cable #33.do you think bmw will still do this part??or will i have to go
elsewere??.did go to a garage today (non-bmw)and they tried to sell me a new roof,RIP-OFF-MERCHANTS
will try and add photo of my new pride and joy,cant wait for the summer XXX
elsewere??.did go to a garage today (non-bmw)and they tried to sell me a new roof,RIP-OFF-MERCHANTS
will try and add photo of my new pride and joy,cant wait for the summer XXX
-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
It really is only thickish wire so it should not be much...you could make one yourself in 5 mins...so don't pay more than a fiver
-
blueyes
- E30 Zone Newbie

- Posts: 13
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: east sussex
do you think i should fit missing cable first b4 carring out adjustments

-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
which missing cable...
if you only have 1 bowden cable ,,(part no 5) ,definitely....
the wire above is not desperate but you would have to get out of the car to fold/arrange the roof every time
have a look at section 54.52 in the repair manual
http://ee1394.com/bmw/docs/factory/repair/en/index1.htm
this will help
if you only have 1 bowden cable ,,(part no 5) ,definitely....
the wire above is not desperate but you would have to get out of the car to fold/arrange the roof every time
have a look at section 54.52 in the repair manual
http://ee1394.com/bmw/docs/factory/repair/en/index1.htm
this will help
-
blueyes
- E30 Zone Newbie

- Posts: 13
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: east sussex
it looks like part #5,thats at the front end of folding roof thays missing
-
blueyes
- E30 Zone Newbie

- Posts: 13
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: east sussex
sorry part #33.
-
blueyes
- E30 Zone Newbie

- Posts: 13
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: east sussex
have tried to go to suggested web site reff to manual repair no 54.52,but unable to log on (restricted access) 
-
Gortour
- E30 Zone Team Member

- Posts: 9025
- Joined: Sat Sep 23, 2006 11:00 pm
- Location: Poole, Dorset
The web address on those pages will be ...e30zone.co.uk/... Change this to ...e30zone.net/ and it will work
Currently slumming it in an E46 Touring
-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
click on the link in my last post.then click on "main Groups" (trh corner) then click on 54...it has just worked for me...
have you two bowden cables one going to each hook from the centre of the hood compartment
have you two bowden cables one going to each hook from the centre of the hood compartment
-
blueyes
- E30 Zone Newbie

- Posts: 13
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: east sussex
have orderd cable #33.paid £7.00,with delivery,should be here wed,cant wait
yes i do have to bowden cables,which will close roof flap when roof not inside,but have to help/push when roof
folded,,as the last stage of roof folding is loose so hopefully cable #33 will pull it more inside
yes i do have to bowden cables,which will close roof flap when roof not inside,but have to help/push when roof
folded,,as the last stage of roof folding is loose so hopefully cable #33 will pull it more inside
-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
you can adjust the bowden cables a bit using the screws near the centre ..they do tend to stretch a bit and if it still does not work we will have to think of something else
part 33 needs to be hooked onto the tensioners on one side and through the tensioners on the other
d
best of luck
part 33 needs to be hooked onto the tensioners on one side and through the tensioners on the other
d
best of luck
-
blueyes
- E30 Zone Newbie

- Posts: 13
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: east sussex
have got part #33,as you described hook on one end and not the other,does it matter as to which side hook goes
above drivers head or passengers side??
also noted today sometimes my dials on dash seems to work then dont,rev counter seems to stick,and temp gauage seems to shoot up to red(on start up) then after driving 15-20 mins seems to settle back
any ideas of what fault might be??
above drivers head or passengers side??
also noted today sometimes my dials on dash seems to work then dont,rev counter seems to stick,and temp gauage seems to shoot up to red(on start up) then after driving 15-20 mins seems to settle back
any ideas of what fault might be??
-
blueyes
- E30 Zone Newbie

- Posts: 13
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: east sussex
oh dear the pull bar part#3 has just snapped,
but on close inspection noted the banjo thread was slightly
bent,b4 i order the new pull bar is the banjo connection part #11 suppose to have a light angle on neck
were it screw into part #3??just incase i have to also order in part,and could of this contributed to were roof
not folding in fully were pull bar was bent,noted roof was folding more tightly were ive fitted that extra cable
bent,b4 i order the new pull bar is the banjo connection part #11 suppose to have a light angle on neck
were it screw into part #3??just incase i have to also order in part,and could of this contributed to were roof
not folding in fully were pull bar was bent,noted roof was folding more tightly were ive fitted that extra cable
-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
My part 3 bent as well and I had to replace,,,they have to take a lot of strain...it could be the reason the roof did not fold down tightly..but hey are not cheap...i think mine cost about £40...yes part 11 does have a slight bend
It does not matter which way in you put part33 ...my temp gauge does the same..if you do a search you will see its quite common ...bmoore says its a loose connection on the back .. and rev counter...not my field of expertise
the man to get slightly used hood parts and the font of all knowledge as regards cabs is Jason in Walsall ...07861 662902
it will be summer soon and you can enjoy it
It does not matter which way in you put part33 ...my temp gauge does the same..if you do a search you will see its quite common ...bmoore says its a loose connection on the back .. and rev counter...not my field of expertise
the man to get slightly used hood parts and the font of all knowledge as regards cabs is Jason in Walsall ...07861 662902
it will be summer soon and you can enjoy it
-
blueyes
- E30 Zone Newbie

- Posts: 13
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: east sussex
well ive orderd in parts #33 and #11,as i phoned up 2 different soft top specialist who said that part#11
should have a straight neck,but well wait and see.
thanks for info on gauage fault (dials sticking)little info for people with same fault reff roof probs,was advised
that its a common fault with electric roofs on e30,and that you should never force roof into storage section
as this will bend the pull rod,and that if you over tighten the adjustment it can force the motor away from its
housing,SOME STRONG MOTOR,
ps quick question,do main dealers not like it when you give part Nos,because they always seem to ask
WERE DID YOU GET THAT PART No FROM,in a pist off tone???or is it because im a woman
should have a straight neck,but well wait and see.
thanks for info on gauage fault (dials sticking)little info for people with same fault reff roof probs,was advised
that its a common fault with electric roofs on e30,and that you should never force roof into storage section
as this will bend the pull rod,and that if you over tighten the adjustment it can force the motor away from its
housing,SOME STRONG MOTOR,
ps quick question,do main dealers not like it when you give part Nos,because they always seem to ask
WERE DID YOU GET THAT PART No FROM,in a pist off tone???or is it because im a woman
-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
you actually break the casing...see this link
http://www.e30ic.com/powertop.htm
the roof should fold down just loosely and then the centre motor operates the hooks at both sides which pull the whole lot into place...you'll get there in the end
I have good relationship with my dealers in Sheffield and i told them where we get the info from so i have no trouble
http://www.e30ic.com/powertop.htm
the roof should fold down just loosely and then the centre motor operates the hooks at both sides which pull the whole lot into place...you'll get there in the end
I have good relationship with my dealers in Sheffield and i told them where we get the info from so i have no trouble
