folding roof probs

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
blueyes
E30 Zone Newbie
E30 Zone Newbie
Posts: 13
Joined: Tue Feb 13, 2007 11:00 pm
Location: east sussex

Post Wed Feb 14, 2007 8:01 pm

please help. have just bought e30 318i soft top (electric roof) but were roof folds into trunk area its not sitting in correctly, so lid will not close
with out me pushing onto folded roof and trying to push button at same time, :cry:
DaveD
E30Zone Wiki Specialist
Posts: 5129
Joined: Tue Jan 11, 2005 11:00 pm
Location: Sheffield

Post Wed Feb 14, 2007 9:11 pm

does it fold properly..does it make any clicking noises and have you adjusted the two bowden cables that pull the locks down...look at the diagram in oem or the service manual in links
Rosc0PColtrane
Married to the E30 Zone
Married to the E30 Zone
Posts: 9757
Joined: Tue Mar 01, 2005 11:00 pm
Location: With Ceiling cat, watching you masturbate.

Post Wed Feb 14, 2007 9:14 pm

Electric rooves are notoriously prone to breaking. I have a thread that is looking at roof adjustment. I'm not sure if it applies the leccy rooves. It could be a weak motor????
DaveD
E30Zone Wiki Specialist
Posts: 5129
Joined: Tue Jan 11, 2005 11:00 pm
Location: Sheffield

Post Wed Feb 14, 2007 9:20 pm

that's why i asked about clicking noises, they (the middle motor) can strip its gears

it has also got to fold properly..that is why there is a wire in the leccy roofs over the drivers head..this keeps it aligned to the tensioners so it folds without having to get out of the car

the bowden cables pull the locks down which do the final stowing of the hood
Rosc0PColtrane
Married to the E30 Zone
Married to the E30 Zone
Posts: 9757
Joined: Tue Mar 01, 2005 11:00 pm
Location: With Ceiling cat, watching you masturbate.

Post Wed Feb 14, 2007 9:26 pm

Dave, you are the encyclopaedia on all things soft top!!! You need a title in recognition!!
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Thu Feb 15, 2007 9:28 am

http://www.e30zone.co.uk/modules.php?na ... ic&t=49200
http://www.e30zone.co.uk/modules.php?na ... ic&t=57251
http://www.e30zone.co.uk/modules.php?na ... ic&t=45142

some light reading...

Now; let me think... a suitable name for DaveD Zone Soft-top... hmmmmm

how about Zone Ski-bum?
DaveD
E30Zone Wiki Specialist
Posts: 5129
Joined: Tue Jan 11, 2005 11:00 pm
Location: Sheffield

Post Thu Feb 15, 2007 11:47 am

now that sounds like a good idea...of to courmayuer in march
User avatar
blueyes
E30 Zone Newbie
E30 Zone Newbie
Posts: 13
Joined: Tue Feb 13, 2007 11:00 pm
Location: east sussex

Post Fri Feb 16, 2007 8:57 pm

blatantarrogance wrote:Dave, you are the encyclopaedia on all things soft top!!! You need a title in recognition!!
thanks for info,No motor does not make clicking noises..
are their adjstments that should be made to roof operation,ie cable
tension checks and if so how do i adjust.as on looking at roof mechanism
i see foding bars with banjo connections,the only cable i can see is the one
that closes the lid,and that cable comes from inside boot area, 8O and another cable which seems to control the hooks on final closing...
DaveD
E30Zone Wiki Specialist
Posts: 5129
Joined: Tue Jan 11, 2005 11:00 pm
Location: Sheffield

Post Sat Feb 17, 2007 9:49 am

you can adjust the roof by screwing inor outparts no 2and 10

http://www.realoem.com/bmw/showparts.do ... g=54&fg=10
this adjusts the throw of the roof ..you might be able to get it to fold "tighter " using this

there should be 2 of part no 5 (one going to either side
http://www.realoem.com/bmw/showparts.do ... g=54&fg=10
these can be adjusted using the scews and if they are too long they will not pull the roof down completey...they could have stretched

the cable that comes from the boot only locks the boot when the flap is open...

there is not a cable that closes the lid??

Is the roof fabric stowed properly when it is closing and do you have the wire that goes through the hood
http://www.realoem.com/bmw/showparts.do ... g=54&fg=10
part 33
User avatar
blueyes
E30 Zone Newbie
E30 Zone Newbie
Posts: 13
Joined: Tue Feb 13, 2007 11:00 pm
Location: east sussex

Post Sat Feb 17, 2007 3:38 pm

thanks for a speedy reply,will investigate and see what i can do,
the roof does seem to fold ok a little stiff on the rear plastic screen,and on inspection there is a wire/cable
that runs from front to back on both sides of the roof and on inspection all seems in good shape winkeye
will have to carry out inspection tomorrow as weather looks like its gonna rain
once again a BIG THANK YOU,youve made a woman with an e30 soft top very happy..
will reply tomorrow with results...
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Sat Feb 17, 2007 4:02 pm

ohhh dear now you've done it - they'll be all over a new female like bees round honey :wink:

(straightens tie, slicks down hair) if you'd like me to inspect your roof personally, East Sussex isn't too far away winkeye
DaveD
E30Zone Wiki Specialist
Posts: 5129
Joined: Tue Jan 11, 2005 11:00 pm
Location: Sheffield

Post Sat Feb 17, 2007 5:11 pm

orangecurry wrote:ohhh dear now you've done it - they'll be all over a new female like bees round honey :wink:

(straightens tie, slicks down hair) if you'd like me to inspect your roof personally, East Sussex isn't too far away winkeye
down boy down!!!

The wires on both sides of the soft top are there to keep the edges of the roof stiff...nothing to do with the opening and closing

the roof has to be helped as much as possible..ie push it up as far as you can before you press the electrics

the roof should have a little pocket over your head running from side to side ,this is where the wire i keep talking about goes and it should have a little hook on one end that loops over the fabric tensioners that run on both sides front to back the other end goes between it.

let orange come over and help....
User avatar
blueyes
E30 Zone Newbie
E30 Zone Newbie
Posts: 13
Joined: Tue Feb 13, 2007 11:00 pm
Location: east sussex

Post Sat Feb 17, 2007 5:59 pm

Daved,have looked at picture reff to wire that goes from left to right #3,and on looking at my roof am unable to
see as to were stored.should i be able to see it,like the wires/cables that run from front to back #8..
because on looking on inside of roof theres an empty sleeve as if something is suppose to go into it :?:
any ideas..
DaveD
E30Zone Wiki Specialist
Posts: 5129
Joined: Tue Jan 11, 2005 11:00 pm
Location: Sheffield

Post Sat Feb 17, 2007 6:11 pm

is it above your head if so it is the tube part 33 goes into

http://www.realoem.com/bmw/showparts.do ... g=54&fg=10

the tensioners are the 2 flat pieces of fabric which are elasticised.... part 19
User avatar
blueyes
E30 Zone Newbie
E30 Zone Newbie
Posts: 13
Joined: Tue Feb 13, 2007 11:00 pm
Location: east sussex

Post Sat Feb 17, 2007 6:25 pm

thanks for that boyz,will need to buy cable #33.do you think bmw will still do this part??or will i have to go
elsewere??.did go to a garage today (non-bmw)and they tried to sell me a new roof,RIP-OFF-MERCHANTS
will try and add photo of my new pride and joy,cant wait for the summer XXX
DaveD
E30Zone Wiki Specialist
Posts: 5129
Joined: Tue Jan 11, 2005 11:00 pm
Location: Sheffield

Post Sat Feb 17, 2007 7:22 pm

It really is only thickish wire so it should not be much...you could make one yourself in 5 mins...so don't pay more than a fiver
User avatar
blueyes
E30 Zone Newbie
E30 Zone Newbie
Posts: 13
Joined: Tue Feb 13, 2007 11:00 pm
Location: east sussex

Post Sun Feb 18, 2007 9:25 am

do you think i should fit missing cable first b4 carring out adjustments :?: :?: :?:
DaveD
E30Zone Wiki Specialist
Posts: 5129
Joined: Tue Jan 11, 2005 11:00 pm
Location: Sheffield

Post Sun Feb 18, 2007 10:17 am

which missing cable...

if you only have 1 bowden cable ,,(part no 5) ,definitely....

the wire above is not desperate but you would have to get out of the car to fold/arrange the roof every time

have a look at section 54.52 in the repair manual

http://ee1394.com/bmw/docs/factory/repair/en/index1.htm

this will help
User avatar
blueyes
E30 Zone Newbie
E30 Zone Newbie
Posts: 13
Joined: Tue Feb 13, 2007 11:00 pm
Location: east sussex

Post Sun Feb 18, 2007 9:20 pm

it looks like part #5,thats at the front end of folding roof thays missing
User avatar
blueyes
E30 Zone Newbie
E30 Zone Newbie
Posts: 13
Joined: Tue Feb 13, 2007 11:00 pm
Location: east sussex

Post Sun Feb 18, 2007 9:27 pm

sorry part #33.
User avatar
blueyes
E30 Zone Newbie
E30 Zone Newbie
Posts: 13
Joined: Tue Feb 13, 2007 11:00 pm
Location: east sussex

Post Sun Feb 18, 2007 9:39 pm

have tried to go to suggested web site reff to manual repair no 54.52,but unable to log on (restricted access) :(
Gortour
E30 Zone Team Member
E30 Zone Team Member
Posts: 9025
Joined: Sat Sep 23, 2006 11:00 pm
Location: Poole, Dorset

Post Sun Feb 18, 2007 9:52 pm

The web address on those pages will be ...e30zone.co.uk/... Change this to ...e30zone.net/ and it will work
Currently slumming it in an E46 Touring
DaveD
E30Zone Wiki Specialist
Posts: 5129
Joined: Tue Jan 11, 2005 11:00 pm
Location: Sheffield

Post Sun Feb 18, 2007 10:32 pm

click on the link in my last post.then click on "main Groups" (trh corner) then click on 54...it has just worked for me...

have you two bowden cables one going to each hook from the centre of the hood compartment
User avatar
blueyes
E30 Zone Newbie
E30 Zone Newbie
Posts: 13
Joined: Tue Feb 13, 2007 11:00 pm
Location: east sussex

Post Tue Feb 20, 2007 7:09 pm

have orderd cable #33.paid £7.00,with delivery,should be here wed,cant wait
yes i do have to bowden cables,which will close roof flap when roof not inside,but have to help/push when roof
folded,,as the last stage of roof folding is loose so hopefully cable #33 will pull it more inside
DaveD
E30Zone Wiki Specialist
Posts: 5129
Joined: Tue Jan 11, 2005 11:00 pm
Location: Sheffield

Post Tue Feb 20, 2007 7:15 pm

you can adjust the bowden cables a bit using the screws near the centre ..they do tend to stretch a bit and if it still does not work we will have to think of something else

part 33 needs to be hooked onto the tensioners on one side and through the tensioners on the other

d

best of luck
User avatar
blueyes
E30 Zone Newbie
E30 Zone Newbie
Posts: 13
Joined: Tue Feb 13, 2007 11:00 pm
Location: east sussex

Post Wed Feb 21, 2007 8:38 pm

have got part #33,as you described hook on one end and not the other,does it matter as to which side hook goes
above drivers head or passengers side??
also noted today sometimes my dials on dash seems to work then dont,rev counter seems to stick,and temp gauage seems to shoot up to red(on start up) then after driving 15-20 mins seems to settle back
any ideas of what fault might be??
User avatar
blueyes
E30 Zone Newbie
E30 Zone Newbie
Posts: 13
Joined: Tue Feb 13, 2007 11:00 pm
Location: east sussex

Post Wed Feb 21, 2007 10:00 pm

oh dear the pull bar part#3 has just snapped, :cry: but on close inspection noted the banjo thread was slightly
bent,b4 i order the new pull bar is the banjo connection part #11 suppose to have a light angle on neck
were it screw into part #3??just incase i have to also order in part,and could of this contributed to were roof
not folding in fully were pull bar was bent,noted roof was folding more tightly were ive fitted that extra cable
DaveD
E30Zone Wiki Specialist
Posts: 5129
Joined: Tue Jan 11, 2005 11:00 pm
Location: Sheffield

Post Wed Feb 21, 2007 10:51 pm

My part 3 bent as well and I had to replace,,,they have to take a lot of strain...it could be the reason the roof did not fold down tightly..but hey are not cheap...i think mine cost about £40...yes part 11 does have a slight bend

It does not matter which way in you put part33 ...my temp gauge does the same..if you do a search you will see its quite common ...bmoore says its a loose connection on the back .. and rev counter...not my field of expertise

the man to get slightly used hood parts and the font of all knowledge as regards cabs is Jason in Walsall ...07861 662902

it will be summer soon and you can enjoy it
User avatar
blueyes
E30 Zone Newbie
E30 Zone Newbie
Posts: 13
Joined: Tue Feb 13, 2007 11:00 pm
Location: east sussex

Post Thu Feb 22, 2007 7:21 pm

well ive orderd in parts #33 and #11,as i phoned up 2 different soft top specialist who said that part#11
should have a straight neck,but well wait and see.
thanks for info on gauage fault (dials sticking)little info for people with same fault reff roof probs,was advised
that its a common fault with electric roofs on e30,and that you should never force roof into storage section :o
as this will bend the pull rod,and that if you over tighten the adjustment it can force the motor away from its
housing,SOME STRONG MOTOR,
ps quick question,do main dealers not like it when you give part Nos,because they always seem to ask
WERE DID YOU GET THAT PART No FROM,in a pist off tone???or is it because im a woman
DaveD
E30Zone Wiki Specialist
Posts: 5129
Joined: Tue Jan 11, 2005 11:00 pm
Location: Sheffield

Post Fri Feb 23, 2007 12:39 am

you actually break the casing...see this link
http://www.e30ic.com/powertop.htm

the roof should fold down just loosely and then the centre motor operates the hooks at both sides which pull the whole lot into place...you'll get there in the end

I have good relationship with my dealers in Sheffield and i told them where we get the info from so i have no trouble