325i sport saloon?
Moderator: martauto
-
Scrotty
- E30 Zone Newbie

- Posts: 231
- Joined: Mon Jan 15, 2007 11:00 pm
- Location: Buckingham
if one had a 4pot 4 door e30....and a rusty but mechanicaly shweet 325i sport 2door...would the prop mainly and tings' fit into the 4door if swapping engines g'box diff shocks and brakes? 
-
snoops
- Major Helmet
- Posts: 2828
- Joined: Fri Nov 03, 2006 11:00 pm
- Location: Time running out for me on the Zone
should do
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
it will do but there are some silly little differences between a 4 pot and 6 pot shells
They only example i can think of at the moment is the welded on bracket on the inner wing on a 6 pot to hold the header tank down. Theres not one there on 4 pots. It's by all means a possible conversion though, as it's been done on here by Jimbob and E30Adam before, but there are silly little differences as i've said with mounting brackets for various things
hth
They only example i can think of at the moment is the welded on bracket on the inner wing on a 6 pot to hold the header tank down. Theres not one there on 4 pots. It's by all means a possible conversion though, as it's been done on here by Jimbob and E30Adam before, but there are silly little differences as i've said with mounting brackets for various things
hth
-
kam-325i
- E30 Zone Team Member

- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
Next door neighboor has got a 318is fitted with the M20B25, and as Simon said the only "Snags" were silly little things, like brackets around the engine bay for hanging things off. Although none of them were serious enough to stop the car being fully functional...
Pete don't care about colour, He would shag a rainbow if he could find the end of it....


-
Scrotty
- E30 Zone Newbie

- Posts: 231
- Joined: Mon Jan 15, 2007 11:00 pm
- Location: Buckingham
cheers for your help peeps
when you say thats the only difference is little things does that mean the prop from the 2 door will also go stright into the 4?no difference in lenght i guess?
tanks
tanks
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
The only problem you will encounter, as long as you're not swapping the body electrical looms, is the absence of a mount for the coolant header tank and a different design for the AFM/air filter bracket.
Both of these can be cut off the old shell and welded/bolted onto the new.
Both of these can be cut off the old shell and welded/bolted onto the new.
