325i sport saloon?

Need technical Q/A then you're in the right place

Moderator: martauto

Scrotty
E30 Zone Newbie
E30 Zone Newbie
Posts: 231
Joined: Mon Jan 15, 2007 11:00 pm
Location: Buckingham

Post Mon Feb 12, 2007 6:50 pm

if one had a 4pot 4 door e30....and a rusty but mechanicaly shweet 325i sport 2door...would the prop mainly and tings' fit into the 4door if swapping engines g'box diff shocks and brakes? winkeye
snoops
Major Helmet
Posts: 2828
Joined: Fri Nov 03, 2006 11:00 pm
Location: Time running out for me on the Zone

Post Mon Feb 12, 2007 8:32 pm

should do
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Mon Feb 12, 2007 8:38 pm

it will do but there are some silly little differences between a 4 pot and 6 pot shells

They only example i can think of at the moment is the welded on bracket on the inner wing on a 6 pot to hold the header tank down. Theres not one there on 4 pots. It's by all means a possible conversion though, as it's been done on here by Jimbob and E30Adam before, but there are silly little differences as i've said with mounting brackets for various things

hth
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Mon Feb 12, 2007 10:09 pm

Next door neighboor has got a 318is fitted with the M20B25, and as Simon said the only "Snags" were silly little things, like brackets around the engine bay for hanging things off. Although none of them were serious enough to stop the car being fully functional...
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
Scrotty
E30 Zone Newbie
E30 Zone Newbie
Posts: 231
Joined: Mon Jan 15, 2007 11:00 pm
Location: Buckingham

Post Wed Feb 14, 2007 6:14 am

cheers for your help peeps :cool: when you say thats the only difference is little things does that mean the prop from the 2 door will also go stright into the 4?no difference in lenght i guess?
tanks :mad:
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Wed Feb 14, 2007 9:14 am

The only problem you will encounter, as long as you're not swapping the body electrical looms, is the absence of a mount for the coolant header tank and a different design for the AFM/air filter bracket.
Both of these can be cut off the old shell and welded/bolted onto the new.