Check oil light

Need technical Q/A then you're in the right place

Moderator: martauto

oze30
E30 Zone Addict
E30 Zone Addict
Posts: 4133
Joined: Mon Oct 24, 2005 11:00 pm
Location: Sydney

Post Sun Feb 11, 2007 10:44 pm

Just had the m30 conversion done, and went for a little trest drive to make sure is ok..

BUT, my oil check light came on. I pulled over and checked it, and put another litre in just to be sure.. but the light still comes on.

Could it be the oil sender?

If so, how do you check/swap? or location????
SPADGE
Married to the E30 Zone
Married to the E30 Zone
Posts: 7373
Joined: Wed Aug 09, 2006 11:00 pm
Location: Milton Keynes, Bucks

Post Mon Feb 12, 2007 1:09 am

I hope you checked the oil level properly before adding another litre Col? Yesterday your oil level was exactly on the top mark on the stick and adding another litre unless it had lost some will do it no good at all :?
Engine conversions, Auto to manual conversions, parts, servicing etc etc... For anything e30 call 07718 901737
oze30
E30 Zone Addict
E30 Zone Addict
Posts: 4133
Joined: Mon Oct 24, 2005 11:00 pm
Location: Sydney

Post Mon Feb 12, 2007 9:39 am

it dropped to halfway.
SPADGE
Married to the E30 Zone
Married to the E30 Zone
Posts: 7373
Joined: Wed Aug 09, 2006 11:00 pm
Location: Milton Keynes, Bucks

Post Mon Feb 12, 2007 10:44 am

oze30 wrote:it dropped to halfway.
Maybe that is why the light came on then
If its gone out now then the sensor isn't faulty
Engine conversions, Auto to manual conversions, parts, servicing etc etc... For anything e30 call 07718 901737
snoops
Major Helmet
Posts: 2828
Joined: Fri Nov 03, 2006 11:00 pm
Location: Time running out for me on the Zone

Post Mon Feb 12, 2007 2:18 pm

check for a leak
Keg_gt
E30 Zone Regular
E30 Zone Regular
Posts: 351
Joined: Sat Sep 30, 2006 11:00 pm
Location: Torbay

Post Mon Feb 12, 2007 3:11 pm

my sensor is odd low revs the light comes on if i clean the spade conection to the sensor it never comes on until the slight leak makes it dirty again
Morat
E30 Zone Team Member
E30 Zone Team Member
Posts: 8943
Joined: Thu Feb 09, 2006 11:00 pm
Location: The Peoples Republic of Yorkshire

Post Mon Feb 12, 2007 3:51 pm

Grats on the conversion Oz :)
E30 Touring 0.35 cD - more slippery than prison soap :)

Image
Praise the Lard... and pass the dripping!
oze30
E30 Zone Addict
E30 Zone Addict
Posts: 4133
Joined: Mon Oct 24, 2005 11:00 pm
Location: Sydney

Post Mon Feb 12, 2007 6:31 pm

Cheers!

No leaks.. Had a good look under there, think it must be a duff sensor. Anyone know how hard they are to change? Is it a oil change jobbie??
Jon_Bmw
Dangerous when thinking
Dangerous when thinking
Posts: 7604
Joined: Tue Jan 11, 2005 11:00 pm
Location: Salisbury

Post Mon Feb 12, 2007 7:12 pm

But if the oil dropped to half way on the dipstick after you checked it, then where has that oil gone? Unless you meant you checked it before you started using the car?
SPADGE
Married to the E30 Zone
Married to the E30 Zone
Posts: 7373
Joined: Wed Aug 09, 2006 11:00 pm
Location: Milton Keynes, Bucks

Post Mon Feb 12, 2007 7:35 pm

oze30 wrote:Cheers!

No leaks.. Had a good look under there, think it must be a duff sensor. Anyone know how hard they are to change? Is it a oil change jobbie??
Col your not making sense man :?
You say the oil level HAD dropped and your oil level light told you this so why do you think you need a sensor??????
The level no doubt dropped as you did a few miles in it after we filled it with oil but you need to change that cooking oil and filter anyway.
Engine conversions, Auto to manual conversions, parts, servicing etc etc... For anything e30 call 07718 901737
oze30
E30 Zone Addict
E30 Zone Addict
Posts: 4133
Joined: Mon Oct 24, 2005 11:00 pm
Location: Sydney

Post Tue Feb 13, 2007 12:17 am

:o:

Just checked the oil filter, and there's oil seeping/leaking from it. Tightened it up now, so we'll see how we go!
User avatar
gooner1
Out humping Reindeer
Posts: 13280
Joined: Fri Apr 14, 2006 11:00 pm
Location: Northampton.For my sins.

Post Tue Feb 13, 2007 6:29 pm

Oze/Spadge, fair play to you forgetting the conversion done. Know its no big deal for you Spadge.Still have,nt started mine yet, want to get engine cleaned and painted first. Also im still a bit unsure of using the 730i gearbox.Got a 5351 clutch but had to enlarge the holes on the pressure plate to accept the 535i flywheel.Have the 730i flywheel too but that wouldntt fit on to the pressure plate either. What exhaust system did you go with in the end.
Image