Just had the m30 conversion done, and went for a little trest drive to make sure is ok..
BUT, my oil check light came on. I pulled over and checked it, and put another litre in just to be sure.. but the light still comes on.
Could it be the oil sender?
If so, how do you check/swap? or location????
Check oil light
Moderator: martauto
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
I hope you checked the oil level properly before adding another litre Col? Yesterday your oil level was exactly on the top mark on the stick and adding another litre unless it had lost some will do it no good at all 
Engine conversions, Auto to manual conversions, parts, servicing etc etc... For anything e30 call 07718 901737
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
it dropped to halfway.
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
Maybe that is why the light came on thenoze30 wrote:it dropped to halfway.
If its gone out now then the sensor isn't faulty
Engine conversions, Auto to manual conversions, parts, servicing etc etc... For anything e30 call 07718 901737
-
snoops
- Major Helmet
- Posts: 2828
- Joined: Fri Nov 03, 2006 11:00 pm
- Location: Time running out for me on the Zone
check for a leak
-
Keg_gt
- E30 Zone Regular

- Posts: 351
- Joined: Sat Sep 30, 2006 11:00 pm
- Location: Torbay
my sensor is odd low revs the light comes on if i clean the spade conection to the sensor it never comes on until the slight leak makes it dirty again
-
Morat
- E30 Zone Team Member

- Posts: 8943
- Joined: Thu Feb 09, 2006 11:00 pm
- Location: The Peoples Republic of Yorkshire
Grats on the conversion Oz 
E30 Touring 0.35 cD - more slippery than prison soap 

Praise the Lard... and pass the dripping!

Praise the Lard... and pass the dripping!
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
Cheers!
No leaks.. Had a good look under there, think it must be a duff sensor. Anyone know how hard they are to change? Is it a oil change jobbie??
No leaks.. Had a good look under there, think it must be a duff sensor. Anyone know how hard they are to change? Is it a oil change jobbie??
-
Jon_Bmw
- Dangerous when thinking

- Posts: 7604
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Salisbury
But if the oil dropped to half way on the dipstick after you checked it, then where has that oil gone? Unless you meant you checked it before you started using the car?
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
Col your not making sense manoze30 wrote:Cheers!
No leaks.. Had a good look under there, think it must be a duff sensor. Anyone know how hard they are to change? Is it a oil change jobbie??
You say the oil level HAD dropped and your oil level light told you this so why do you think you need a sensor??????
The level no doubt dropped as you did a few miles in it after we filled it with oil but you need to change that cooking oil and filter anyway.
Engine conversions, Auto to manual conversions, parts, servicing etc etc... For anything e30 call 07718 901737
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
Just checked the oil filter, and there's oil seeping/leaking from it. Tightened it up now, so we'll see how we go!
-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
Oze/Spadge, fair play to you forgetting the conversion done. Know its no big deal for you Spadge.Still have,nt started mine yet, want to get engine cleaned and painted first. Also im still a bit unsure of using the 730i gearbox.Got a 5351 clutch but had to enlarge the holes on the pressure plate to accept the 535i flywheel.Have the 730i flywheel too but that wouldntt fit on to the pressure plate either. What exhaust system did you go with in the end.

