Brake pad wear indicator light

Need technical Q/A then you're in the right place

Moderator: martauto

DaveD
E30Zone Wiki Specialist
Posts: 5129
Joined: Tue Jan 11, 2005 11:00 pm
Location: Sheffield

Post Mon Jan 31, 2005 1:17 pm

I replaced the wire but it it keeps coming on intermitantly the pads are ok

any ideas
Guest

Post Mon Jan 31, 2005 5:41 pm

yeah. Take the bulb out! They all do it sooner or later....
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Mon Jan 31, 2005 7:07 pm

Flippin' cowboys!
I've posted this before - Inside the instrument cluster, near the top of the temperature gauge, you will see the soldered connections of a large 220 ohm resistor. There is a rectangular lump on the back of the cluster which accomodates this resistor. Resolder these joints and all will be well, as long as the plug / socket on the strut isn't corroded.
DaveD
E30Zone Wiki Specialist
Posts: 5129
Joined: Tue Jan 11, 2005 11:00 pm
Location: Sheffield

Post Tue Feb 01, 2005 10:08 am

ta
Guest

Post Tue Feb 01, 2005 11:11 am

:wink: Or do that.... :wink:
User avatar
Ron_Burgundy
E30 Zone Newbie
E30 Zone Newbie
Posts: 8
Joined: Tue Jul 12, 2005 11:00 pm

Post Sat Feb 03, 2007 4:22 am

Sorry to revive such an old thread but this had been killing me for years now! You have my eternal gratitude :D
DaveD
E30Zone Wiki Specialist
Posts: 5129
Joined: Tue Jan 11, 2005 11:00 pm
Location: Sheffield

Post Sat Feb 03, 2007 9:24 am

welcome to the zone...It is a welcome change when some actually does a search rather than starting a new thread on the same old subject.......but this was not my problem it turned out to be the rear pads...you never know!
E30Mark
E30 Zone Team Member
E30 Zone Team Member
Posts: 8107
Joined: Sun Jan 09, 2005 11:00 pm
Location: Wimborne, Dorset

Post Sat Feb 03, 2007 9:46 am

Download the following procedure (Credit goes to Brian M for the cure), must get it hosted properly one day...

http://www.mark-e-roberts.co.uk/220%20o ... cedure.doc
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Feb 03, 2007 10:27 am

bmw325virgin wrote:They all do it sooner or later....
Yes, they all do! That's because the solder joints on this particular resistor ALWAYS crack.
Every single cluster I've ever inspected has either had the joints already cracked, or well on their way to it.
DaveD
E30Zone Wiki Specialist
Posts: 5129
Joined: Tue Jan 11, 2005 11:00 pm
Location: Sheffield

Post Sat Feb 03, 2007 10:59 am

errr brian ..did you notice the date on that post!! :P
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Feb 03, 2007 12:53 pm

Yes, but the thread was revived by Ron_Burgundy, not me.
Still as relevant today as it was two years ago!