I replaced the wire but it it keeps coming on intermitantly the pads are ok
any ideas
Brake pad wear indicator light
Moderator: martauto
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Flippin' cowboys!
I've posted this before - Inside the instrument cluster, near the top of the temperature gauge, you will see the soldered connections of a large 220 ohm resistor. There is a rectangular lump on the back of the cluster which accomodates this resistor. Resolder these joints and all will be well, as long as the plug / socket on the strut isn't corroded.
I've posted this before - Inside the instrument cluster, near the top of the temperature gauge, you will see the soldered connections of a large 220 ohm resistor. There is a rectangular lump on the back of the cluster which accomodates this resistor. Resolder these joints and all will be well, as long as the plug / socket on the strut isn't corroded.
-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
ta
-
Ron_Burgundy
- E30 Zone Newbie

- Posts: 8
- Joined: Tue Jul 12, 2005 11:00 pm
Sorry to revive such an old thread but this had been killing me for years now! You have my eternal gratitude 
-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
welcome to the zone...It is a welcome change when some actually does a search rather than starting a new thread on the same old subject.......but this was not my problem it turned out to be the rear pads...you never know!
-
E30Mark
- E30 Zone Team Member

- Posts: 8107
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Wimborne, Dorset
Download the following procedure (Credit goes to Brian M for the cure), must get it hosted properly one day...
http://www.mark-e-roberts.co.uk/220%20o ... cedure.doc
http://www.mark-e-roberts.co.uk/220%20o ... cedure.doc
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
PM for details
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Yes, they all do! That's because the solder joints on this particular resistor ALWAYS crack.bmw325virgin wrote:They all do it sooner or later....
Every single cluster I've ever inspected has either had the joints already cracked, or well on their way to it.
-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
errr brian ..did you notice the date on that post!! 
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Yes, but the thread was revived by Ron_Burgundy, not me.
Still as relevant today as it was two years ago!
Still as relevant today as it was two years ago!
