Two really annoying 325i problems
Moderator: martauto
-
Theo
- Old Skooler

- Posts: 10735
- Joined: Wed Jun 01, 2005 11:00 pm
- Location: Kent
Hi there, got a couple of issues with my 325i which are really starting to annoy me now!
Firstly, really poor idle from cold - it hunts badly from about 500 to 1200 rpm, all sorted out once it's warmed up a little, only even happens from a cold start. I've tried various ICV's from car which idle fine and none have worked.
Second problem, relates to warms starts! The turd nearly always takes two or 3 cranks of the ignition before it starts. Why is this? What needs replacing?
Any help appreciated,
Theo
Firstly, really poor idle from cold - it hunts badly from about 500 to 1200 rpm, all sorted out once it's warmed up a little, only even happens from a cold start. I've tried various ICV's from car which idle fine and none have worked.
Second problem, relates to warms starts! The turd nearly always takes two or 3 cranks of the ignition before it starts. Why is this? What needs replacing?
Any help appreciated,
Theo
-
klu99apm
- E30 Zone Newbie

- Posts: 134
- Joined: Sat Mar 05, 2005 11:00 pm
- Location: Rutland / Derbyshire
You've probably already done this but have you changed the blue temp sensor, as I think this is involved with cold starts and could be involved with the warm start problems too?
It made a big difference on my car when I changed mine.
It made a big difference on my car when I changed mine.
-
Theo
- Old Skooler

- Posts: 10735
- Joined: Wed Jun 01, 2005 11:00 pm
- Location: Kent
Hi there, yes I changed the blue temp sensor a while back, although not with a new item, but one from another car which didn't have the problem. May try a different spare in there and see what happens.
-
Speedtouch
- Old Skooler

- Posts: 14130
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
Changing the fuel filter and fuel line hoses (I was forced to because they developed splits & pinholes) has helped my 325i's starting alot.
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
-
klu99apm
- E30 Zone Newbie

- Posts: 134
- Joined: Sat Mar 05, 2005 11:00 pm
- Location: Rutland / Derbyshire
I could be wrong but I thought the AFM didn't have a role at tickover?
Is the TPS set properly, does it click when the throttle is opened?
Is the TPS set properly, does it click when the throttle is opened?
-
Theo
- Old Skooler

- Posts: 10735
- Joined: Wed Jun 01, 2005 11:00 pm
- Location: Kent
As far as I know, the AFM has no influence on the idle.
The TPS clicks when the throttle is opened very slightly.
The TPS clicks when the throttle is opened very slightly.
-
Dan318-is
- Married to the E30 Zone

- Posts: 8006
- Joined: Wed Jul 06, 2005 11:00 pm
- Location: Surrey/London
The air flow metre has no effect on idle an is rendered useless by the TPS on idle.
It does sound very like a temperature sensor theo, do a resistance check
It does sound very like a temperature sensor theo, do a resistance check
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
Dan get my text you nobba?
Theo the car is scrap after i wasted you in the toureg on the A40!
We can do a little tinker on Sat if you like?
Theo the car is scrap after i wasted you in the toureg on the A40!
We can do a little tinker on Sat if you like?
-
Dan318-is
- Married to the E30 Zone

- Posts: 8006
- Joined: Wed Jul 06, 2005 11:00 pm
- Location: Surrey/London
No i didnt; you got the right number? il send it over
-
Theo
- Old Skooler

- Posts: 10735
- Joined: Wed Jun 01, 2005 11:00 pm
- Location: Kent
Yes, definately some tinkering needing to be done! Can get a bit more fraggin gdone on your 'thing' if you want?
If you want a race, just ask - any time.
If you want a race, just ask - any time.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Check out the injector plug and socket on the metalwork under the inlet manifold.
Poor starting could also be the fuel rail loosing pressure while it's parked. Pull out the fuel pump relay and link together pins 30 and 87 of its socket. Does that cure the poor starting?
Poor starting could also be the fuel rail loosing pressure while it's parked. Pull out the fuel pump relay and link together pins 30 and 87 of its socket. Does that cure the poor starting?
-
k
- E30 Zone Newbie

- Posts: 103
- Joined: Sun Sep 17, 2006 11:00 pm
- Location: cumbria
Theo.....Have you had the car hooked up to the exhaust gas analyser and had the mixture set at tickover, by the little allen screw down the hole.
The mixture at tickover is checked at MOT times and for a 1990 car as long as the reading is below 3.5% CO you get a pass. The factory figure is 1 or 1.5 % ( can't remember, but it's in the books)
Have the garage remove the allen key after each adjustment and blip the throttle just to check that the CO returns to the FACTORY DESIRED SETTING.
If this screw has been moved/twiddled , as they usually have by previous well meaning owners.........there is only setting for this screw and that is the correct one, and you need a gas analyser/MOT garage who has one to get that setting.
I happen to think that unless this is correct it can contribute to all the jerkiness that happens as you move from closed to part throttle position etc. I may be wrong on this one and still watching the long thread....
but give it a try, you never know.
The mixture at tickover is checked at MOT times and for a 1990 car as long as the reading is below 3.5% CO you get a pass. The factory figure is 1 or 1.5 % ( can't remember, but it's in the books)
Have the garage remove the allen key after each adjustment and blip the throttle just to check that the CO returns to the FACTORY DESIRED SETTING.
If this screw has been moved/twiddled , as they usually have by previous well meaning owners.........there is only setting for this screw and that is the correct one, and you need a gas analyser/MOT garage who has one to get that setting.
I happen to think that unless this is correct it can contribute to all the jerkiness that happens as you move from closed to part throttle position etc. I may be wrong on this one and still watching the long thread....
but give it a try, you never know.
-
Theo
- Old Skooler

- Posts: 10735
- Joined: Wed Jun 01, 2005 11:00 pm
- Location: Kent
I will try all these things on the weekend and see if I get anywhere. Thanks very much for all the advice.

