Two really annoying 325i problems

Need technical Q/A then you're in the right place

Moderator: martauto

Theo
Old Skooler
Old Skooler
Posts: 10735
Joined: Wed Jun 01, 2005 11:00 pm
Location: Kent

Post Wed Jan 31, 2007 10:50 am

Hi there, got a couple of issues with my 325i which are really starting to annoy me now!

Firstly, really poor idle from cold - it hunts badly from about 500 to 1200 rpm, all sorted out once it's warmed up a little, only even happens from a cold start. I've tried various ICV's from car which idle fine and none have worked.

Second problem, relates to warms starts! The turd nearly always takes two or 3 cranks of the ignition before it starts. Why is this? What needs replacing?

Any help appreciated,

Theo
User avatar
klu99apm
E30 Zone Newbie
E30 Zone Newbie
Posts: 134
Joined: Sat Mar 05, 2005 11:00 pm
Location: Rutland / Derbyshire

Post Wed Jan 31, 2007 11:14 am

You've probably already done this but have you changed the blue temp sensor, as I think this is involved with cold starts and could be involved with the warm start problems too?

It made a big difference on my car when I changed mine.
Theo
Old Skooler
Old Skooler
Posts: 10735
Joined: Wed Jun 01, 2005 11:00 pm
Location: Kent

Post Wed Jan 31, 2007 11:18 am

Hi there, yes I changed the blue temp sensor a while back, although not with a new item, but one from another car which didn't have the problem. May try a different spare in there and see what happens.
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Wed Jan 31, 2007 11:28 am

Changing the fuel filter and fuel line hoses (I was forced to because they developed splits & pinholes) has helped my 325i's starting alot.
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Wed Jan 31, 2007 12:04 pm

AFM?
Image
User avatar
klu99apm
E30 Zone Newbie
E30 Zone Newbie
Posts: 134
Joined: Sat Mar 05, 2005 11:00 pm
Location: Rutland / Derbyshire

Post Wed Jan 31, 2007 12:14 pm

I could be wrong but I thought the AFM didn't have a role at tickover?

Is the TPS set properly, does it click when the throttle is opened?
Theo
Old Skooler
Old Skooler
Posts: 10735
Joined: Wed Jun 01, 2005 11:00 pm
Location: Kent

Post Wed Jan 31, 2007 1:19 pm

As far as I know, the AFM has no influence on the idle.

The TPS clicks when the throttle is opened very slightly.
Dan318-is
Married to the E30 Zone
Married to the E30 Zone
Posts: 8006
Joined: Wed Jul 06, 2005 11:00 pm
Location: Surrey/London

Post Wed Jan 31, 2007 6:14 pm

The air flow metre has no effect on idle an is rendered useless by the TPS on idle.

It does sound very like a temperature sensor theo, do a resistance check
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Wed Jan 31, 2007 6:17 pm

Dan get my text you nobba?

Theo the car is scrap after i wasted you in the toureg on the A40!

We can do a little tinker on Sat if you like?
Dan318-is
Married to the E30 Zone
Married to the E30 Zone
Posts: 8006
Joined: Wed Jul 06, 2005 11:00 pm
Location: Surrey/London

Post Wed Jan 31, 2007 6:22 pm

No i didnt; you got the right number? il send it over
Theo
Old Skooler
Old Skooler
Posts: 10735
Joined: Wed Jun 01, 2005 11:00 pm
Location: Kent

Post Wed Jan 31, 2007 6:23 pm

Yes, definately some tinkering needing to be done! Can get a bit more fraggin gdone on your 'thing' if you want?

If you want a race, just ask - any time. :piss:
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Wed Jan 31, 2007 11:25 pm

Check out the injector plug and socket on the metalwork under the inlet manifold.
Poor starting could also be the fuel rail loosing pressure while it's parked. Pull out the fuel pump relay and link together pins 30 and 87 of its socket. Does that cure the poor starting?
User avatar
k
E30 Zone Newbie
E30 Zone Newbie
Posts: 103
Joined: Sun Sep 17, 2006 11:00 pm
Location: cumbria

Post Thu Feb 01, 2007 9:34 am

Theo.....Have you had the car hooked up to the exhaust gas analyser and had the mixture set at tickover, by the little allen screw down the hole.
The mixture at tickover is checked at MOT times and for a 1990 car as long as the reading is below 3.5% CO you get a pass. The factory figure is 1 or 1.5 % ( can't remember, but it's in the books)
Have the garage remove the allen key after each adjustment and blip the throttle just to check that the CO returns to the FACTORY DESIRED SETTING.
If this screw has been moved/twiddled , as they usually have by previous well meaning owners.........there is only setting for this screw and that is the correct one, and you need a gas analyser/MOT garage who has one to get that setting.
I happen to think that unless this is correct it can contribute to all the jerkiness that happens as you move from closed to part throttle position etc. I may be wrong on this one and still watching the long thread....
but give it a try, you never know.
Theo
Old Skooler
Old Skooler
Posts: 10735
Joined: Wed Jun 01, 2005 11:00 pm
Location: Kent

Post Thu Feb 01, 2007 10:26 am

I will try all these things on the weekend and see if I get anywhere. Thanks very much for all the advice.