3,91 diff on a 318is cab???

Need technical Q/A then you're in the right place

Moderator: martauto

bennyboy
E30 Zone Newbie
E30 Zone Newbie
Posts: 218
Joined: Mon Jan 10, 2005 11:00 pm
Location: West Sussex

Post Mon Jan 29, 2007 12:19 am

My cab had a 4,27 from new. this broke. i replaced it with a 4,10 for now as this one isn't very good either. i ordered another diff from bmc before xmas and i have been sent a 3,91. they insist it came from the 318i cab they were breaking. anyway, is it worth putting it on or will it make the car to slow?
Image
16V IS engine!!!
cliffybabe
Powered by Nelly
Powered by Nelly
Posts: 10020
Joined: Sun Dec 18, 2005 11:00 pm
Location: Croydon

Post Mon Jan 29, 2007 12:38 am

na a 3:91 is ok for a 318i, i dont think it will slow it down but im sure one of the guys will confirm
Image
Considering Selling the Cabby, looks like its gonna go
bennyboy
E30 Zone Newbie
E30 Zone Newbie
Posts: 218
Joined: Mon Jan 10, 2005 11:00 pm
Location: West Sussex

Post Mon Jan 29, 2007 1:02 am

i really wanted a 4,27 though. the car was still good for 130-140 but never need that. just wanted it to be a bit nippy really. my limiter comes in at 6500rpm. with the 4,10 in there, in 5th, its doing 75 at 3250rpm. so its geared for 150 at the moment but with less acceleration. just thought the 3,91 would really slow it down (acceleration)
Image
16V IS engine!!!
cliffybabe
Powered by Nelly
Powered by Nelly
Posts: 10020
Joined: Sun Dec 18, 2005 11:00 pm
Location: Croydon

Post Mon Jan 29, 2007 1:04 am

i think it does bring it down a bit

When i got a new dif for the 318i shitter i had i got a 4:10 and was told it would make it a nipy motor with that on it :cool:
Image
Considering Selling the Cabby, looks like its gonna go
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Mon Jan 29, 2007 10:52 am

benny, i've got a 3.91 LSD on my 318iS and theres nothing in it really, when comparing it to the 4.10

what are you doing with the 4.27? is it open or LSD and is it small or medium case?
Image
eamo
E30 Zone Regular
E30 Zone Regular
Posts: 465
Joined: Tue Feb 22, 2005 11:00 pm
Location: Offaly, Ireland

Post Mon Jan 29, 2007 2:50 pm

you will notice a slight difference alright going from a 4.27 to a 3.91

acceleration up through the gears will be slower but your top end will be extended slightly

I swapped the diff in my old m3 which was a 3.25 for a 3.64 and imo transformed the car for the better. acceleration up throught the gears was excellent
Bob_S
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5412
Joined: Sat Jun 11, 2005 11:00 pm
Location: chester, cheshire

Post Mon Jan 29, 2007 5:18 pm

i noticed a difference going from a 4.1 to 4.27
I would think a 3.91 is too long for an is especially a cabby too
Bollocks to this 24v scrap!
bennyboy
E30 Zone Newbie
E30 Zone Newbie
Posts: 218
Joined: Mon Jan 10, 2005 11:00 pm
Location: West Sussex

Post Mon Jan 29, 2007 11:04 pm

Stu, i think its a small case. the 4,27 is in my garage but going to the tip soon. one of the two, or maybe both prop bearings have gone in it. was going to rebuild it untill i found out what was involved.

When i went from the 4,27 to the 4,10, i noticed the acceleration suffer. A difference of 0,17. Now another 0,19.
Think it might have to go on anyway because i have just started a new job and need the car.
Image
16V IS engine!!!
miniblob
E30 Zone Addict
E30 Zone Addict
Posts: 3153
Joined: Thu Jan 05, 2006 11:00 pm
Location: Croydon/Uckfield

Post Tue Jan 30, 2007 7:53 am

I get the feeling Stu may have plans for that 4.27 winkeye
327 Touring with bass!!!

>>> WWW.DNRVINYL.CO.UK >>> UK GARAGE SPECIALIST >>>
>>> WWW.DNRVINYL.COM >>> FREE MIX DOWNLOADS!!! >>>
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Tue Jan 30, 2007 8:53 am

miniblob wrote:I get the feeling Stu may have plans for that 4.27 winkeye
who? me? :twisted:

benny, take a photo of the diff and send it to me, via PM or something please, before you bin it!!
Image