could someone possibly do me a favour by taking a picture of their reciever drier and how it is fitted on. have just come to refit mine and cant figure it out....i must be missing something and real oem is no help.
Thanks
A/C reciever drier
Moderator: martauto
-
ian332isport
- E30 Zone Team Member

- Posts: 5380
- Joined: Wed Dec 22, 2004 11:00 pm
- Location: West Sussex
I don't have a picture, but it just fits in the hole down behind the drivers side headlamp. The dryer has 2 or 3 metal tabs sticking out that are used to screw it down to the panel. I'm pretty sure it only fits one way around.
Ian.
Ian.
If it aint broke - Modify it...
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
-
sam325is
- E30 Zone Addict

- Posts: 2002
- Joined: Thu Jul 06, 2006 11:00 pm
- Location: Cheltenham
i think i am missing a bracket. cheers for the help guys.
That pic has the mountings just out of the picture
That pic has the mountings just out of the picture
-
ian332isport
- E30 Zone Team Member

- Posts: 5380
- Joined: Wed Dec 22, 2004 11:00 pm
- Location: West Sussex
There is no other bracket or mounting. You should have two metal tabs sticking out of the side of the dryer (welded on). These are simply screwed to the flat metal panel (into plastic inserts).sam325is wrote:i think i am missing a bracket. cheers for the help guys.
That pic has the mountings just out of the picture
Ian.
If it aint broke - Modify it...
-
sam325is
- E30 Zone Addict

- Posts: 2002
- Joined: Thu Jul 06, 2006 11:00 pm
- Location: Cheltenham
nope no metal brackets welded on mine. its a aftermarket 134a drier it has one bracket that goes round the drier to hold it and tightens by a nut. this then goes up and has 2 holes in it. however these 2 holes are far off lining up with the plastic body nuts in the engine bay. so im thinking there is a secondary braked that goes on there. by the sound of things what i have isnt a standard fitting...however it didnt look like a bodge job when i took it off.
i will get a pic for you as it is hard to explain.
also does anyone know where i can buy a new r134a reciever drier?
i will get a pic for you as it is hard to explain.
also does anyone know where i can buy a new r134a reciever drier?
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia

Andrew
-
sam325is
- E30 Zone Addict

- Posts: 2002
- Joined: Thu Jul 06, 2006 11:00 pm
- Location: Cheltenham
nice one andrew. are those metal bits that the screws go through welded on, on yours?
Thanks
Thanks
-
sam325is
- E30 Zone Addict

- Posts: 2002
- Joined: Thu Jul 06, 2006 11:00 pm
- Location: Cheltenham
sorry didnt realise you have answered that above lol.
looks like im going to have to get a new one, as my last one must have been a tidy looking bodge
looks like im going to have to get a new one, as my last one must have been a tidy looking bodge
-
sam325is
- E30 Zone Addict

- Posts: 2002
- Joined: Thu Jul 06, 2006 11:00 pm
- Location: Cheltenham
andrew on your air con pressure switch did you have 4 wires coming of it when you bought it. i now know that i only need to connect 2 of my wires from my four wires on the switch. 2 are blue and 2 are green/black.
what colour are your 2 wires coming of the switch and where do they go to, condenser or compressor?
Thanks
what colour are your 2 wires coming of the switch and where do they go to, condenser or compressor?
Thanks

