A/C reciever drier

Need technical Q/A then you're in the right place

Moderator: martauto

sam325is
E30 Zone Addict
E30 Zone Addict
Posts: 2002
Joined: Thu Jul 06, 2006 11:00 pm
Location: Cheltenham

Post Sat Jan 27, 2007 3:24 pm

could someone possibly do me a favour by taking a picture of their reciever drier and how it is fitted on. have just come to refit mine and cant figure it out....i must be missing something and real oem is no help.

Thanks
ian332isport
E30 Zone Team Member
E30 Zone Team Member
Posts: 5380
Joined: Wed Dec 22, 2004 11:00 pm
Location: West Sussex

Post Sat Jan 27, 2007 6:13 pm

I don't have a picture, but it just fits in the hole down behind the drivers side headlamp. The dryer has 2 or 3 metal tabs sticking out that are used to screw it down to the panel. I'm pretty sure it only fits one way around.

Ian.
If it aint broke - Modify it...
Demlotcrew
E30 Zone Team Member
E30 Zone Team Member
Posts: 13329
Joined: Mon Dec 20, 2004 11:00 pm
Location: East Anglia

Post Sat Jan 27, 2007 9:28 pm

sam325is
E30 Zone Addict
E30 Zone Addict
Posts: 2002
Joined: Thu Jul 06, 2006 11:00 pm
Location: Cheltenham

Post Sun Jan 28, 2007 10:15 pm

i think i am missing a bracket. cheers for the help guys.

That pic has the mountings just out of the picture :cry:
ian332isport
E30 Zone Team Member
E30 Zone Team Member
Posts: 5380
Joined: Wed Dec 22, 2004 11:00 pm
Location: West Sussex

Post Mon Jan 29, 2007 7:21 am

sam325is wrote:i think i am missing a bracket. cheers for the help guys.

That pic has the mountings just out of the picture :cry:
There is no other bracket or mounting. You should have two metal tabs sticking out of the side of the dryer (welded on). These are simply screwed to the flat metal panel (into plastic inserts).

Ian.
If it aint broke - Modify it...
sam325is
E30 Zone Addict
E30 Zone Addict
Posts: 2002
Joined: Thu Jul 06, 2006 11:00 pm
Location: Cheltenham

Post Mon Jan 29, 2007 11:03 am

nope no metal brackets welded on mine. its a aftermarket 134a drier it has one bracket that goes round the drier to hold it and tightens by a nut. this then goes up and has 2 holes in it. however these 2 holes are far off lining up with the plastic body nuts in the engine bay. so im thinking there is a secondary braked that goes on there. by the sound of things what i have isnt a standard fitting...however it didnt look like a bodge job when i took it off.

i will get a pic for you as it is hard to explain.

also does anyone know where i can buy a new r134a reciever drier?
Demlotcrew
E30 Zone Team Member
E30 Zone Team Member
Posts: 13329
Joined: Mon Dec 20, 2004 11:00 pm
Location: East Anglia

Post Mon Jan 29, 2007 1:22 pm

Image

Andrew
sam325is
E30 Zone Addict
E30 Zone Addict
Posts: 2002
Joined: Thu Jul 06, 2006 11:00 pm
Location: Cheltenham

Post Mon Jan 29, 2007 8:06 pm

nice one andrew. are those metal bits that the screws go through welded on, on yours?

Thanks
sam325is
E30 Zone Addict
E30 Zone Addict
Posts: 2002
Joined: Thu Jul 06, 2006 11:00 pm
Location: Cheltenham

Post Thu Feb 01, 2007 1:28 pm

sorry didnt realise you have answered that above lol.

looks like im going to have to get a new one, as my last one must have been a tidy looking bodge :(
sam325is
E30 Zone Addict
E30 Zone Addict
Posts: 2002
Joined: Thu Jul 06, 2006 11:00 pm
Location: Cheltenham

Post Mon Feb 12, 2007 5:57 pm

andrew on your air con pressure switch did you have 4 wires coming of it when you bought it. i now know that i only need to connect 2 of my wires from my four wires on the switch. 2 are blue and 2 are green/black.

what colour are your 2 wires coming of the switch and where do they go to, condenser or compressor?

Thanks