OBC Bulb cracked when I took 'em out...
Moderator: martauto
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
I pulled the white tab out to replace them.
Tried to pull them off the circuit board and they would not budge out of their white housings.
Then one of them just collapsed into a billion pieces.
Anyone know how I remove to replace?
I'm guessing they're 3w.
Thanks all.
Tried to pull them off the circuit board and they would not budge out of their white housings.
Then one of them just collapsed into a billion pieces.
Anyone know how I remove to replace?
I'm guessing they're 3w.
Thanks all.
-
E30Mark
- E30 Zone Team Member

- Posts: 8107
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Wimborne, Dorset
The fact that they are soldered to the board means don't try and pull them off
They are 6V lamps wired in series, don't know the wattage...
They are 6V lamps wired in series, don't know the wattage...
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
PM for details
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
I know boss, I tried to pull the bulbs out of the housings not the housings off the board.
C'mon man, help! I can be computered up before it get's dark!
I can't believe you answered and didn't tell me how to do it!:D
ETK says they're 1.2w.
C'mon man, help! I can be computered up before it get's dark!
I can't believe you answered and didn't tell me how to do it!:D
ETK says they're 1.2w.
Last edited by Royalratch on Sun Jan 28, 2007 12:52 pm, edited 1 time in total.
-
Theo
- Old Skooler

- Posts: 10735
- Joined: Wed Jun 01, 2005 11:00 pm
- Location: Kent
Have you got new bulbs? Have you got a soldering iron?
These will help.
These will help.
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
Yes and yes.
So it's not plug and play?
I know what's coming next.
Cheers all.
So it's not plug and play?
I know what's coming next.
Cheers all.
-
E30Mark
- E30 Zone Team Member

- Posts: 8107
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Wimborne, Dorset
I did, UNSOLDER the old lamp, SOLDER in the new one.Royalratch wrote:I know boss, I tried to pull the bulbs out of the housings not the housings off the board.
C'mon man, help! I can be computered up before it get's dark!
I can't believe you answered and didn't tell me how to do it!:D
ETK says they're 1.2w.
The lamps are not fixed to the white housing...
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
PM for details
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
Cool.
Thank you all.
Thank you all.
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
Maplins don't have these bulbs. They have some similar stuff but not the right Voltages or Watts - how much does this matter?
I thinnk it's nor more than 10V with bulbs at 1.3W?
Also, the bulbs don't come out of their white base holders do they?
So when you say solder the new one's in, you mean staright onto the board as the white plugs are not re-usable.
Is that corect?
I thinnk it's nor more than 10V with bulbs at 1.3W?
Also, the bulbs don't come out of their white base holders do they?
So when you say solder the new one's in, you mean staright onto the board as the white plugs are not re-usable.
Is that corect?
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
I think I got mine from Maplins - Brianmoooore mentioned the correct Maplins number on a thread way back.Royalratch wrote:Maplins don't have these bulbs. They have some similar stuff but not the right Voltages or Watts - how much does this matter?
5v IIRCRoyalratch wrote: I thinnk it's nor more than 10V with bulbs at 1.3W?
yes they do - unsolder them.Royalratch wrote: Also, the bulbs don't come out of their white base holders do they?
no - unsolder the existing bulb/wires, solder in the new ones.Royalratch wrote:So when you say solder the new one's in, you mean staright onto the board as the white plugs are not re-usable.
Is that corect?
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
How do you unsolder them from the white housings? They look they've been moulded around the bulb?
Where would I apply the iron to loosen the old bulb out of the housing?
Where would I apply the iron to loosen the old bulb out of the housing?
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
my memory is not what is was - CPC not Maplins
http://www.e30zone.net/modules.php?name ... 13&start=0
search function works well
I can't think how to explain this any clearer - there are two wires from each bulb that are soldered to the bit of circuit board, and the wires are long enough to wrap around the white plastic reflecting surface? Is there just confusion about the reflecting white bit? I have no pictures to hand.
http://www.e30zone.net/modules.php?name ... 13&start=0
search function works well
I can't think how to explain this any clearer - there are two wires from each bulb that are soldered to the bit of circuit board, and the wires are long enough to wrap around the white plastic reflecting surface? Is there just confusion about the reflecting white bit? I have no pictures to hand.
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
I got the correct bulbs that's no problem and I got them from a thread on here that I found using the search function. 
As far as placing the new bulbs into the INDIVIDUAL plug housing on the circuit boards, I don't see how as they look the they are not designed to accept new bulbs.
I have actually ordered 2 new sets from BMW but I just want to put it all back tonight as I'm the most impatient person on earth.
As far as placing the new bulbs into the INDIVIDUAL plug housing on the circuit boards, I don't see how as they look the they are not designed to accept new bulbs.
I have actually ordered 2 new sets from BMW but I just want to put it all back tonight as I'm the most impatient person on earth.
-
buster
- E30 Zone Addict

- Posts: 3779
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Near middlesbrough,Teesside
I just went to bmw and bought the whole white plastic bulb thing ! much easier
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
Royalratch wrote:I have actually ordered 2 new sets from BMW but I just want to put it all back tonight as I'm the most impatient person on earth.
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
Royal is just making it difficult
as usual
-
buster
- E30 Zone Addict

- Posts: 3779
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Near middlesbrough,Teesside
orangecurry wrote:Royal is just making it difficultas usual
-
e30-unit-soldier
- E30 Zone Regular

- Posts: 551
- Joined: Thu Nov 24, 2005 11:00 pm
- Location: Bristol
How much did that cost mate?buster wrote:I just went to bmw and bought the whole white plastic bulb thing ! much easier
-
buster
- E30 Zone Addict

- Posts: 3779
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Near middlesbrough,Teesside
cant remember
-
Cloggy Saint
- Old Skooler

- Posts: 8027
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: zummerzet
-
buster
- E30 Zone Addict

- Posts: 3779
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Near middlesbrough,Teesside
i thought it was about £12-14 ish.Bought mine about 4 years ago mind !
-
smithy318i
- Engaged to the E30 Zone

- Posts: 5797
- Joined: Thu Apr 28, 2005 11:00 pm
- Location: Tyne & Wear
Is this a joke, or did someone try and pull the bulbs out of the PCB ?

-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
They are £22 exactly. They also take 3 WHOLE days to arrive which is unnacceptable.
Cha.
Cha.
-
buster
- E30 Zone Addict

- Posts: 3779
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Near middlesbrough,Teesside
no joke smithyRoyalratch wrote:
Tried to pull them off the circuit board and they would not budge out of their white housings.
Then one of them just collapsed into a billion pieces.
Thanks all.
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
Aaah, the smug sneer of arrogance - I like!:D
The fact is, I didn't think BMW would place bulbs in a plastic housing that weren't removable. They were already blown so I wasn't too concerned about breaking them to get them off. They have to come off anyway - I just did it without a soldering iron.
But nobody has answered my question yet - how do you get the old bulb out of it's small white plug to install then re-solder the new one?
The fact is, I didn't think BMW would place bulbs in a plastic housing that weren't removable. They were already blown so I wasn't too concerned about breaking them to get them off. They have to come off anyway - I just did it without a soldering iron.
But nobody has answered my question yet - how do you get the old bulb out of it's small white plug to install then re-solder the new one?
-
gazza
- E30 Zone Camper

- Posts: 1266
- Joined: Tue Feb 08, 2005 11:00 pm
- Location: north london/herts
its not glued or anything when you unsolder the wires the just fall out of the white plastic holders
when they are in they are wired in series ...so if one blows the other stops working
i got my bulbs from rs components a bag of 10 cost me £3....(got none left now though)dont think it matters that much if they go in without the plastic cups as long as the bulb dont touch the plastic of the obc
when they are in they are wired in series ...so if one blows the other stops working
i got my bulbs from rs components a bag of 10 cost me £3....(got none left now though)dont think it matters that much if they go in without the plastic cups as long as the bulb dont touch the plastic of the obc
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
These ain't coming out. I pulled them off the PCB and the filaments are stuck in the housing hard.
Isn't this the most exciting thread ever?
Isn't this the most exciting thread ever?
-
E30Mark
- E30 Zone Team Member

- Posts: 8107
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Wimborne, Dorset
Unsolder the lamp and throw it in the bin with the white plastic mount still attached, you don't really need it. Solder in the new lamp, job done.
It's not rocket science

It's not rocket science
Well its taken you nearly 36 hours so far, 3 Whole days wait is almost worth it.They are £22 exactly. They also take 3 WHOLE days to arrive which is unnacceptable.
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
PM for details
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Bulbs are 5V, must be changed as an identical pair, and just fall out of the white cups when the leads are properly unsoldered.
May be a lot easier to get the complete unit from BMW, but at £22 (+VAT?) versus 60p from CPC plus five minutes work with a soldering iron, I know which I'll be doing!
Surprised no one's mentioned LEDs yet, just to complicate things a bit more!
May be a lot easier to get the complete unit from BMW, but at £22 (+VAT?) versus 60p from CPC plus five minutes work with a soldering iron, I know which I'll be doing!
Surprised no one's mentioned LEDs yet, just to complicate things a bit more!
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
You're not a very nice man.E30Mark wrote:Unsolder the lamp and throw it in the bin with the white plastic mount still attached, you don't really need it. Solder in the new lamp, job done.
It's not rocket science
Well its taken you nearly 36 hours so far, 3 Whole days wait is almost worth it.They are £22 exactly. They also take 3 WHOLE days to arrive which is unnacceptable.
-
smithy318i
- Engaged to the E30 Zone

- Posts: 5797
- Joined: Thu Apr 28, 2005 11:00 pm
- Location: Tyne & Wear
Not a good idea to start talking about fitting LED's.Brianmoooore wrote:Surprised no one's mentioned LEDs yet, just to complicate things a bit more!
It has taken this long just to explain how to remove the bulbs.

-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
So these LED's you talk of...
-
smithy318i
- Engaged to the E30 Zone

- Posts: 5797
- Joined: Thu Apr 28, 2005 11:00 pm
- Location: Tyne & Wear
I was half expecting "whats an LED ? 'Royalratch wrote:So these LED's you talk of...
Lol
Red this... http://newling.no-ip.com/rep/bordcomput ... licht.html

-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
Now THIS is what I call help!
Two thumbs up smithy.
Two thumbs up smithy.

