OBC Bulb cracked when I took 'em out...

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
Royalratch
E30 Zone Addict
E30 Zone Addict
Posts: 4921
Joined: Sat Oct 21, 2006 11:00 pm
Location: London

Post Sun Jan 28, 2007 12:44 pm

I pulled the white tab out to replace them.

Tried to pull them off the circuit board and they would not budge out of their white housings.

Then one of them just collapsed into a billion pieces.

Anyone know how I remove to replace?

I'm guessing they're 3w.

Thanks all.
E30Mark
E30 Zone Team Member
E30 Zone Team Member
Posts: 8107
Joined: Sun Jan 09, 2005 11:00 pm
Location: Wimborne, Dorset

Post Sun Jan 28, 2007 12:47 pm

The fact that they are soldered to the board means don't try and pull them off :roll:

They are 6V lamps wired in series, don't know the wattage...
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
User avatar
Royalratch
E30 Zone Addict
E30 Zone Addict
Posts: 4921
Joined: Sat Oct 21, 2006 11:00 pm
Location: London

Post Sun Jan 28, 2007 12:49 pm

I know boss, I tried to pull the bulbs out of the housings not the housings off the board.

C'mon man, help! I can be computered up before it get's dark!

I can't believe you answered and didn't tell me how to do it!:D

ETK says they're 1.2w.
Last edited by Royalratch on Sun Jan 28, 2007 12:52 pm, edited 1 time in total.
Theo
Old Skooler
Old Skooler
Posts: 10735
Joined: Wed Jun 01, 2005 11:00 pm
Location: Kent

Post Sun Jan 28, 2007 12:51 pm

Have you got new bulbs? Have you got a soldering iron?

These will help.
User avatar
Royalratch
E30 Zone Addict
E30 Zone Addict
Posts: 4921
Joined: Sat Oct 21, 2006 11:00 pm
Location: London

Post Sun Jan 28, 2007 12:54 pm

Yes and yes.

So it's not plug and play?

I know what's coming next.

Cheers all.
E30Mark
E30 Zone Team Member
E30 Zone Team Member
Posts: 8107
Joined: Sun Jan 09, 2005 11:00 pm
Location: Wimborne, Dorset

Post Sun Jan 28, 2007 12:57 pm

Royalratch wrote:I know boss, I tried to pull the bulbs out of the housings not the housings off the board.

C'mon man, help! I can be computered up before it get's dark!

I can't believe you answered and didn't tell me how to do it!:D

ETK says they're 1.2w.
I did, UNSOLDER the old lamp, SOLDER in the new one.

The lamps are not fixed to the white housing...
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
User avatar
Royalratch
E30 Zone Addict
E30 Zone Addict
Posts: 4921
Joined: Sat Oct 21, 2006 11:00 pm
Location: London

Post Sun Jan 28, 2007 1:03 pm

Cool.

Thank you all.
User avatar
Royalratch
E30 Zone Addict
E30 Zone Addict
Posts: 4921
Joined: Sat Oct 21, 2006 11:00 pm
Location: London

Post Mon Jan 29, 2007 3:49 pm

Maplins don't have these bulbs. They have some similar stuff but not the right Voltages or Watts - how much does this matter?

I thinnk it's nor more than 10V with bulbs at 1.3W?

Also, the bulbs don't come out of their white base holders do they?

So when you say solder the new one's in, you mean staright onto the board as the white plugs are not re-usable.

Is that corect?
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Mon Jan 29, 2007 3:56 pm

Royalratch wrote:Maplins don't have these bulbs. They have some similar stuff but not the right Voltages or Watts - how much does this matter?
I think I got mine from Maplins - Brianmoooore mentioned the correct Maplins number on a thread way back.
Royalratch wrote: I thinnk it's nor more than 10V with bulbs at 1.3W?
5v IIRC
Royalratch wrote: Also, the bulbs don't come out of their white base holders do they?
yes they do - unsolder them.
Royalratch wrote:So when you say solder the new one's in, you mean staright onto the board as the white plugs are not re-usable.

Is that corect?
no - unsolder the existing bulb/wires, solder in the new ones.
User avatar
Royalratch
E30 Zone Addict
E30 Zone Addict
Posts: 4921
Joined: Sat Oct 21, 2006 11:00 pm
Location: London

Post Mon Jan 29, 2007 4:01 pm

How do you unsolder them from the white housings? They look they've been moulded around the bulb?

Where would I apply the iron to loosen the old bulb out of the housing?
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Mon Jan 29, 2007 4:08 pm

my memory is not what is was - CPC not Maplins
http://www.e30zone.net/modules.php?name ... 13&start=0

search function works well winkeye

I can't think how to explain this any clearer - there are two wires from each bulb that are soldered to the bit of circuit board, and the wires are long enough to wrap around the white plastic reflecting surface? Is there just confusion about the reflecting white bit? I have no pictures to hand.
User avatar
Royalratch
E30 Zone Addict
E30 Zone Addict
Posts: 4921
Joined: Sat Oct 21, 2006 11:00 pm
Location: London

Post Mon Jan 29, 2007 4:13 pm

I got the correct bulbs that's no problem and I got them from a thread on here that I found using the search function. winkeye

As far as placing the new bulbs into the INDIVIDUAL plug housing on the circuit boards, I don't see how as they look the they are not designed to accept new bulbs.

I have actually ordered 2 new sets from BMW but I just want to put it all back tonight as I'm the most impatient person on earth.:D
User avatar
buster
E30 Zone Addict
E30 Zone Addict
Posts: 3779
Joined: Sun Jan 09, 2005 11:00 pm
Location: Near middlesbrough,Teesside

Post Mon Jan 29, 2007 4:20 pm

I just went to bmw and bought the whole white plastic bulb thing ! much easier
User avatar
Royalratch
E30 Zone Addict
E30 Zone Addict
Posts: 4921
Joined: Sat Oct 21, 2006 11:00 pm
Location: London

Post Mon Jan 29, 2007 4:22 pm

Royalratch wrote:I have actually ordered 2 new sets from BMW but I just want to put it all back tonight as I'm the most impatient person on earth.:D
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Mon Jan 29, 2007 4:22 pm

Royal is just making it difficult winkeye as usual
User avatar
buster
E30 Zone Addict
E30 Zone Addict
Posts: 3779
Joined: Sun Jan 09, 2005 11:00 pm
Location: Near middlesbrough,Teesside

Post Mon Jan 29, 2007 4:23 pm

orangecurry wrote:Royal is just making it difficult winkeye as usual
:roll:
User avatar
e30-unit-soldier
E30 Zone Regular
E30 Zone Regular
Posts: 551
Joined: Thu Nov 24, 2005 11:00 pm
Location: Bristol

Post Mon Jan 29, 2007 4:51 pm

buster wrote:I just went to bmw and bought the whole white plastic bulb thing ! much easier
How much did that cost mate?
User avatar
buster
E30 Zone Addict
E30 Zone Addict
Posts: 3779
Joined: Sun Jan 09, 2005 11:00 pm
Location: Near middlesbrough,Teesside

Post Mon Jan 29, 2007 5:10 pm

cant remember
Cloggy Saint
Old Skooler
Old Skooler
Posts: 8027
Joined: Sun Jan 09, 2005 11:00 pm
Location: zummerzet

Post Mon Jan 29, 2007 5:13 pm

Think they're about 22 quid :eek:
Image

E30 zone - promoting adult illiteracy since 2004
User avatar
buster
E30 Zone Addict
E30 Zone Addict
Posts: 3779
Joined: Sun Jan 09, 2005 11:00 pm
Location: Near middlesbrough,Teesside

Post Mon Jan 29, 2007 5:19 pm

i thought it was about £12-14 ish.Bought mine about 4 years ago mind !
smithy318i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5797
Joined: Thu Apr 28, 2005 11:00 pm
Location: Tyne & Wear

Post Mon Jan 29, 2007 5:20 pm

Is this a joke, or did someone try and pull the bulbs out of the PCB ?
Image
User avatar
Royalratch
E30 Zone Addict
E30 Zone Addict
Posts: 4921
Joined: Sat Oct 21, 2006 11:00 pm
Location: London

Post Mon Jan 29, 2007 5:22 pm

They are £22 exactly. They also take 3 WHOLE days to arrive which is unnacceptable.

Cha.
User avatar
buster
E30 Zone Addict
E30 Zone Addict
Posts: 3779
Joined: Sun Jan 09, 2005 11:00 pm
Location: Near middlesbrough,Teesside

Post Mon Jan 29, 2007 5:22 pm

Royalratch wrote:
Tried to pull them off the circuit board and they would not budge out of their white housings.

Then one of them just collapsed into a billion pieces.

Thanks all.
no joke smithy :?
User avatar
Royalratch
E30 Zone Addict
E30 Zone Addict
Posts: 4921
Joined: Sat Oct 21, 2006 11:00 pm
Location: London

Post Mon Jan 29, 2007 5:31 pm

Aaah, the smug sneer of arrogance - I like!:D

The fact is, I didn't think BMW would place bulbs in a plastic housing that weren't removable. They were already blown so I wasn't too concerned about breaking them to get them off. They have to come off anyway - I just did it without a soldering iron.:D

But nobody has answered my question yet - how do you get the old bulb out of it's small white plug to install then re-solder the new one?
User avatar
gazza
E30 Zone Camper
E30 Zone Camper
Posts: 1266
Joined: Tue Feb 08, 2005 11:00 pm
Location: north london/herts

Post Mon Jan 29, 2007 5:44 pm

its not glued or anything when you unsolder the wires the just fall out of the white plastic holders
when they are in they are wired in series ...so if one blows the other stops working
i got my bulbs from rs components a bag of 10 cost me £3....(got none left now though)dont think it matters that much if they go in without the plastic cups as long as the bulb dont touch the plastic of the obc
User avatar
Royalratch
E30 Zone Addict
E30 Zone Addict
Posts: 4921
Joined: Sat Oct 21, 2006 11:00 pm
Location: London

Post Mon Jan 29, 2007 5:49 pm

These ain't coming out. I pulled them off the PCB and the filaments are stuck in the housing hard.

Isn't this the most exciting thread ever?
E30Mark
E30 Zone Team Member
E30 Zone Team Member
Posts: 8107
Joined: Sun Jan 09, 2005 11:00 pm
Location: Wimborne, Dorset

Post Mon Jan 29, 2007 7:00 pm

Unsolder the lamp and throw it in the bin with the white plastic mount still attached, you don't really need it. Solder in the new lamp, job done.

It's not rocket science :mad:
They are £22 exactly. They also take 3 WHOLE days to arrive which is unnacceptable.
Well its taken you nearly 36 hours so far, 3 Whole days wait is almost worth it. :D
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Mon Jan 29, 2007 7:25 pm

Bulbs are 5V, must be changed as an identical pair, and just fall out of the white cups when the leads are properly unsoldered.
May be a lot easier to get the complete unit from BMW, but at £22 (+VAT?) versus 60p from CPC plus five minutes work with a soldering iron, I know which I'll be doing!
Surprised no one's mentioned LEDs yet, just to complicate things a bit more!
User avatar
Royalratch
E30 Zone Addict
E30 Zone Addict
Posts: 4921
Joined: Sat Oct 21, 2006 11:00 pm
Location: London

Post Mon Jan 29, 2007 7:48 pm

E30Mark wrote:Unsolder the lamp and throw it in the bin with the white plastic mount still attached, you don't really need it. Solder in the new lamp, job done.

It's not rocket science :mad:
They are £22 exactly. They also take 3 WHOLE days to arrive which is unnacceptable.
Well its taken you nearly 36 hours so far, 3 Whole days wait is almost worth it. :D
You're not a very nice man.
smithy318i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5797
Joined: Thu Apr 28, 2005 11:00 pm
Location: Tyne & Wear

Post Mon Jan 29, 2007 9:31 pm

Brianmoooore wrote:Surprised no one's mentioned LEDs yet, just to complicate things a bit more!
Not a good idea to start talking about fitting LED's.
It has taken this long just to explain how to remove the bulbs.
Image
User avatar
Royalratch
E30 Zone Addict
E30 Zone Addict
Posts: 4921
Joined: Sat Oct 21, 2006 11:00 pm
Location: London

Post Mon Jan 29, 2007 9:48 pm

So these LED's you talk of...
smithy318i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5797
Joined: Thu Apr 28, 2005 11:00 pm
Location: Tyne & Wear

Post Mon Jan 29, 2007 9:52 pm

Royalratch wrote:So these LED's you talk of...
I was half expecting "whats an LED ? '

Lol

Red this... http://newling.no-ip.com/rep/bordcomput ... licht.html
Image
User avatar
Royalratch
E30 Zone Addict
E30 Zone Addict
Posts: 4921
Joined: Sat Oct 21, 2006 11:00 pm
Location: London

Post Mon Jan 29, 2007 10:28 pm

Now THIS is what I call help!

Two thumbs up smithy.