Is there any difference in cylinder heads pre 1988?
Im after one and have just been offered a cylinder head from a d plate auto. My car is 1988. 325i.
Can this be used?
Thanks?
differences in cylinder heads?
Moderator: martauto
-
Giggz
- E30 Zone Camper

- Posts: 1270
- Joined: Wed Apr 13, 2005 11:00 pm
- Location: East London

^stolen but not forgotten^
-
StuBeeDoo
- Engaged to the E30 Zone

- Posts: 6756
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: Up My Own Arse
-
Giggz
- E30 Zone Camper

- Posts: 1270
- Joined: Wed Apr 13, 2005 11:00 pm
- Location: East London
Fair enough. Thanks for the info.

^stolen but not forgotten^
-
Turbo-Brown
- Boost Junkie
- Posts: 4705
- Joined: Tue Feb 15, 2005 11:00 pm
- Location: Aldershot, Hants
That's handy to know, I was gonna ask the same question at some point 
-
Giggz
- E30 Zone Camper

- Posts: 1270
- Joined: Wed Apr 13, 2005 11:00 pm
- Location: East London
Another question i have now is when a engine has been 'rebuilt' what sort of work would of the head had. Is it a case of just cleaning it up?

^stolen but not forgotten^
-
StuBeeDoo
- Engaged to the E30 Zone

- Posts: 6756
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: Up My Own Arse
Could be everything, could be nothing much.Giggz wrote:Another question i have now is when a engine has been 'rebuilt' what sort of work would of the head had. Is it a case of just cleaning it up?
Same goes for the bottom end.
A proper rebuild should be anything showing the slightest bit of wear replaced.
Someone on a tight budget would probably just replace anything that's totally shagged (possibly with second-hand!) and kid themselves that they've done it properly.
A properly rebuilt head should be pressure tested, re-faced, have all new manifold studs fitted, possibly new valve seats, new valves, valve guides, valve stem seals, valve springs, rockers and shafts, camshaft, oil spray bar and camshaft oil seal and housing o-ring.
-
Giggz
- E30 Zone Camper

- Posts: 1270
- Joined: Wed Apr 13, 2005 11:00 pm
- Location: East London
If the head i have been offered has had all that done to it then i shall be very happy!
Thats some very handy info there sir. Thanks.
What else do you reckon i can do to the engine to give it a new lease of life whilst the head is off.
I dont want to do any mods. Just want to renew or replace.
Thats some very handy info there sir. Thanks.
What else do you reckon i can do to the engine to give it a new lease of life whilst the head is off.
I dont want to do any mods. Just want to renew or replace.

^stolen but not forgotten^
-
kam-325i
- E30 Zone Team Member

- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
Clean , Clean & Clean........
Pete don't care about colour, He would shag a rainbow if he could find the end of it....


-
Giggz
- E30 Zone Camper

- Posts: 1270
- Joined: Wed Apr 13, 2005 11:00 pm
- Location: East London
Oh hell yeah!
Goes without saying.
Any special products i should look out for?
Goes without saying.
Any special products i should look out for?

^stolen but not forgotten^
-
kam-325i
- E30 Zone Team Member

- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
I just used alot of white spirits.....
Pete don't care about colour, He would shag a rainbow if he could find the end of it....



