whats the best rated induction kit for 325i
Moderator: martauto
-
slippo
- E30 Zone Newbie

- Posts: 114
- Joined: Thu Dec 21, 2006 11:00 pm
- Location: north east london
im in need of an induction kit any one no what the best kit for a 325i is?
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
youll get 100 different answers from 100 different people, then the originality buftys will tell you bmw made the best ever original airbox that is un improvable.just buy one of the more well known ones you like 
-
snoops
- Major Helmet
- Posts: 2828
- Joined: Fri Nov 03, 2006 11:00 pm
- Location: Time running out for me on the Zone
many people would argue that the standard setup is the best or standard airbox with a performance airfilter e.g. k&n, pipercross but if you want an induction kit youd need a proper heat shield as without a heat shield theres the issue of the hot air from the engine being sucked in which causes power loss but an induction kit is the best for a sweet sound 
-
slippo
- E30 Zone Newbie

- Posts: 114
- Joined: Thu Dec 21, 2006 11:00 pm
- Location: north east london
in your opinion what one have you noticed the most difference if any? with induction kits
-
dimebag_from_hell
- E30 Zone Camper

- Posts: 1494
- Joined: Sun Aug 27, 2006 11:00 pm
- Location: NORTHERN IRELAND
none at all, just noise!

"Service to others is the rent you pay for your room here on earth."
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
i definately think it my car feel more urgent and responsive using a pipercross cone with cold air ducting and heatsheild but thats totally irrelevant to your application as i have a different engine 
-
maxfield
- Old Skooler

- Posts: 15185
- Joined: Sat Nov 26, 2005 11:00 pm
- Location: Mansfield
ITG is suppose to be the best
I think sal is starting to sell a new one that is suppose to be better
I think sal is starting to sell a new one that is suppose to be better

-
slippo
- E30 Zone Newbie

- Posts: 114
- Joined: Thu Dec 21, 2006 11:00 pm
- Location: north east london
so does it make a different how much you spend? or do you think they all do the same job?
-
slippo
- E30 Zone Newbie

- Posts: 114
- Joined: Thu Dec 21, 2006 11:00 pm
- Location: north east london
maxfield what u using on yours?
-
d6dph
- Married to the E30 Zone

- Posts: 12435
- Joined: Sun Aug 14, 2005 11:00 pm
- Location: Tiptree. Essex
What on his pushbike 
I have a BMC CDA airbox on mine, sounds evil. Extra power - No probably not but the sound sure makes it worth while.
I have a BMC CDA airbox on mine, sounds evil. Extra power - No probably not but the sound sure makes it worth while.

-
slippo
- E30 Zone Newbie

- Posts: 114
- Joined: Thu Dec 21, 2006 11:00 pm
- Location: north east london
can you break that down for me, whats bmc cda? sounds cool tho
-
snoops
- Major Helmet
- Posts: 2828
- Joined: Fri Nov 03, 2006 11:00 pm
- Location: Time running out for me on the Zone
thats the name of it bmc cda i forgot to mention that but the sound does make it worth while, bsically all ull get off an induction kit is a nice sound probablyacouple more horses but nothing ull notice
-
d6dph
- Married to the E30 Zone

- Posts: 12435
- Joined: Sun Aug 14, 2005 11:00 pm
- Location: Tiptree. Essex
BMC Is the brand, CDA is the product (Carbon Dynamic Airbox iirc), Basically a sealed airfilter.
Zoneshop sells them : http://www.xsperformance.co.uk/e30zone/ ... ucts_id=20
A short in-car clip of my 325 fitted with the BMC. It is not a quiet system. :
Zoneshop sells them : http://www.xsperformance.co.uk/e30zone/ ... ucts_id=20
A short in-car clip of my 325 fitted with the BMC. It is not a quiet system. :


-
maxfield
- Old Skooler

- Posts: 15185
- Joined: Sat Nov 26, 2005 11:00 pm
- Location: Mansfield
That sounds awesome dave 

-
d6dph
- Married to the E30 Zone

- Posts: 12435
- Joined: Sun Aug 14, 2005 11:00 pm
- Location: Tiptree. Essex
Cheers dude, Nearly put the standard airbox back on the other day as it is quite loud, but then I went for a blast


-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
I like the standard box with a K&N element, I had a ITG but the standard box just feels better 

Considering Selling the Cabby, looks like its gonna go
-
snoops
- Major Helmet
- Posts: 2828
- Joined: Fri Nov 03, 2006 11:00 pm
- Location: Time running out for me on the Zone
that sounds sweet 
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
The best bit my K&N element was free i nicked it out of a breaker at the scrappy 

Considering Selling the Cabby, looks like its gonna go
-
Rosc0PColtrane
- Married to the E30 Zone

- Posts: 9757
- Joined: Tue Mar 01, 2005 11:00 pm
- Location: With Ceiling cat, watching you masturbate.
loads of opinions on induction. Have had K&N 57i and now have a pipercross kit. The K&N at the time used a plastic braket to mount it to the air mass meter or AFm or whatever you want to call it. The braket gets brittle and eventually breaks. K&N refused to even sell me a replacement without a receipt (after 2 years of ownership). The whole kit felt very general and non specific to fit. Certainly not E30 specific, if that makes sense.
I never even noticed it had fallen off. Replaced it with a pipercross cone. It's a one pice system and is all machined aluminium. Far better quality than the K&N. It certainly felt more urgent to me.
Oh and as for heat shields, yeah great idea, although there's an article somewhere which measured engine bay temps to this end. In summary, it said there's very little difference in temp between engine bay and outside. Perhaps there is a bigger difference when you are stop starting around town, but I guess you hardly need top performance stuck in traffic!
That's just my opinion based on my experienced.
I never even noticed it had fallen off. Replaced it with a pipercross cone. It's a one pice system and is all machined aluminium. Far better quality than the K&N. It certainly felt more urgent to me.
Oh and as for heat shields, yeah great idea, although there's an article somewhere which measured engine bay temps to this end. In summary, it said there's very little difference in temp between engine bay and outside. Perhaps there is a bigger difference when you are stop starting around town, but I guess you hardly need top performance stuck in traffic!
That's just my opinion based on my experienced.
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
i thought you were about to show off your brakes as well when that transit pulled out!!!!d6dph wrote:A short in-car clip of my 325 fitted with the BMC. It is not a quiet system.
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
d6dph
- Married to the E30 Zone

- Posts: 12435
- Joined: Sun Aug 14, 2005 11:00 pm
- Location: Tiptree. Essex
Nah it's fine, Was using my indicators so he knew I was turning. 

-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
i hoped that was the case!
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
Andy335Touring
- Married to the E30 Zone

- Posts: 7144
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Long Eaton,Nottingham
Sure does, just hope it sounds as good on my M30 when i get onemaxfield wrote:That sounds awesome dave
-
e36boy
- E30 Zone Addict

- Posts: 2353
- Joined: Sun Apr 16, 2006 11:00 pm
- Location: The Chatsworth
How much is the pipercross one ?blatantarrogance wrote:loads of opinions on induction. Have had K&N 57i and now have a pipercross kit. The K&N at the time used a plastic braket to mount it to the air mass meter or AFm or whatever you want to call it. The braket gets brittle and eventually breaks. K&N refused to even sell me a replacement without a receipt (after 2 years of ownership). The whole kit felt very general and non specific to fit. Certainly not E30 specific, if that makes sense.
I never even noticed it had fallen off. Replaced it with a pipercross cone. It's a one pice system and is all machined aluminium. Far better quality than the K&N. It certainly felt more urgent to me.
Oh and as for heat shields, yeah great idea, although there's an article somewhere which measured engine bay temps to this end. In summary, it said there's very little difference in temp between engine bay and outside. Perhaps there is a bigger difference when you are stop starting around town, but I guess you hardly need top performance stuck in traffic!
That's just my opinion based on my experienced.
-
ash-e30
- E30 Zone Regular

- Posts: 394
- Joined: Mon Jan 22, 2007 11:00 pm
he said it allmaxfield wrote:That sounds awesome dave
-
Rosc0PColtrane
- Married to the E30 Zone

- Posts: 9757
- Joined: Tue Mar 01, 2005 11:00 pm
- Location: With Ceiling cat, watching you masturbate.
IRO 90 nicker mate?e36boy wrote:How much is the pipercross one ?blatantarrogance wrote:loads of opinions on induction. Have had K&N 57i and now have a pipercross kit. The K&N at the time used a plastic braket to mount it to the air mass meter or AFm or whatever you want to call it. The braket gets brittle and eventually breaks. K&N refused to even sell me a replacement without a receipt (after 2 years of ownership). The whole kit felt very general and non specific to fit. Certainly not E30 specific, if that makes sense.
I never even noticed it had fallen off. Replaced it with a pipercross cone. It's a one pice system and is all machined aluminium. Far better quality than the K&N. It certainly felt more urgent to me.
Oh and as for heat shields, yeah great idea, although there's an article somewhere which measured engine bay temps to this end. In summary, it said there's very little difference in temp between engine bay and outside. Perhaps there is a bigger difference when you are stop starting around town, but I guess you hardly need top performance stuck in traffic!
That's just my opinion based on my experienced.
-
Skip
- E30 Zone Regular

- Posts: 309
- Joined: Fri Apr 15, 2005 11:00 pm
- Location: Norfolk
Dave, what exhaust are you using, or is all that noise the airbox??d6dph wrote:BMC Is the brand, CDA is the product (Carbon Dynamic Airbox iirc), Basically a sealed airfilter.
Zoneshop sells them : http://www.xsperformance.co.uk/e30zone/ ... ucts_id=20
A short in-car clip of my 325 fitted with the BMC. It is not a quiet system. :
ex-325i Touring
-
d6dph
- Married to the E30 Zone

- Posts: 12435
- Joined: Sun Aug 14, 2005 11:00 pm
- Location: Tiptree. Essex
Most of the noise you hear on that video is airbox, it's quite loud tbh.
The exhaust is a powerflow system.
Don't forget the camera is sitting above the taxdisc holder and is virtually pointing at the engine, so will sound a bit louder than it is. The BMC has a real resonance at certain revs so can be a little annoying on long journeys, but I'm past caring. Sounds great imo
The exhaust is a powerflow system.
Don't forget the camera is sitting above the taxdisc holder and is virtually pointing at the engine, so will sound a bit louder than it is. The BMC has a real resonance at certain revs so can be a little annoying on long journeys, but I'm past caring. Sounds great imo

-
chinchilla
- E30 Zone Regular

- Posts: 743
- Joined: Mon Aug 21, 2006 11:00 pm
- Location: Cardiff!
im going to get one for my 320i just for the sound! its sounds so vicious!
-
dazleeds
- old skool raver

- Posts: 12883
- Joined: Fri Apr 01, 2005 11:00 pm
- Location: Empire Building @
fair play matyed6dph wrote:Most of the noise you hear on that video is airbox, it's quite loud tbh.
The exhaust is a powerflow system.
Don't forget the camera is sitting above the taxdisc holder and is virtually pointing at the engine, so will sound a bit louder than it is. The BMC has a real resonance at certain revs so can be a little annoying on long journeys, but I'm past caring. Sounds great imo
sounds nice and throaty
just 1 thing
how come the car wasnt squealing round the bends with its arse out
www.oldskoolfantasy.co.uk
in the shit,the one to blame,yeh its all my fault ;)
in the shit,the one to blame,yeh its all my fault ;)
-
snoops
- Major Helmet
- Posts: 2828
- Joined: Fri Nov 03, 2006 11:00 pm
- Location: Time running out for me on the Zone
that sounds sweet, my 325s calling out for 1 of them lol
-
d6dph
- Married to the E30 Zone

- Posts: 12435
- Joined: Sun Aug 14, 2005 11:00 pm
- Location: Tiptree. Essex
Because I drive like a girly...... No Worse than a girlydazleeds wrote:fair play matyed6dph wrote:Most of the noise you hear on that video is airbox, it's quite loud tbh.
The exhaust is a powerflow system.
Don't forget the camera is sitting above the taxdisc holder and is virtually pointing at the engine, so will sound a bit louder than it is. The BMC has a real resonance at certain revs so can be a little annoying on long journeys, but I'm past caring. Sounds great imo
sounds nice and throaty
just 1 thing
how come the car wasnt squealing round the bends with its arse out

