whats the best rated induction kit for 325i

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

slippo
E30 Zone Newbie
E30 Zone Newbie
Posts: 114
Joined: Thu Dec 21, 2006 11:00 pm
Location: north east london

Post Sun Jan 28, 2007 8:36 pm

im in need of an induction kit any one no what the best kit for a 325i is?
fuzzy
He who sleeps with "Gingers"
Posts: 14351
Joined: Sat Jun 04, 2005 11:00 pm
Location: melbourne Australia

Post Sun Jan 28, 2007 8:42 pm

youll get 100 different answers from 100 different people, then the originality buftys will tell you bmw made the best ever original airbox that is un improvable.just buy one of the more well known ones you like winkeye
snoops
Major Helmet
Posts: 2828
Joined: Fri Nov 03, 2006 11:00 pm
Location: Time running out for me on the Zone

Post Sun Jan 28, 2007 8:43 pm

many people would argue that the standard setup is the best or standard airbox with a performance airfilter e.g. k&n, pipercross but if you want an induction kit youd need a proper heat shield as without a heat shield theres the issue of the hot air from the engine being sucked in which causes power loss but an induction kit is the best for a sweet sound winkeye
slippo
E30 Zone Newbie
E30 Zone Newbie
Posts: 114
Joined: Thu Dec 21, 2006 11:00 pm
Location: north east london

Post Sun Jan 28, 2007 9:05 pm

in your opinion what one have you noticed the most difference if any? with induction kits
dimebag_from_hell
E30 Zone Camper
E30 Zone Camper
Posts: 1494
Joined: Sun Aug 27, 2006 11:00 pm
Location: NORTHERN IRELAND

Post Sun Jan 28, 2007 9:06 pm

none at all, just noise!
Image

"Service to others is the rent you pay for your room here on earth."
fuzzy
He who sleeps with "Gingers"
Posts: 14351
Joined: Sat Jun 04, 2005 11:00 pm
Location: melbourne Australia

Post Sun Jan 28, 2007 9:08 pm

i definately think it my car feel more urgent and responsive using a pipercross cone with cold air ducting and heatsheild but thats totally irrelevant to your application as i have a different engine :D
maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Sun Jan 28, 2007 9:08 pm

ITG is suppose to be the best

I think sal is starting to sell a new one that is suppose to be better
Image
slippo
E30 Zone Newbie
E30 Zone Newbie
Posts: 114
Joined: Thu Dec 21, 2006 11:00 pm
Location: north east london

Post Sun Jan 28, 2007 9:11 pm

so does it make a different how much you spend? or do you think they all do the same job?
slippo
E30 Zone Newbie
E30 Zone Newbie
Posts: 114
Joined: Thu Dec 21, 2006 11:00 pm
Location: north east london

Post Sun Jan 28, 2007 9:13 pm

maxfield what u using on yours?
d6dph
Married to the E30 Zone
Married to the E30 Zone
Posts: 12435
Joined: Sun Aug 14, 2005 11:00 pm
Location: Tiptree. Essex

Post Sun Jan 28, 2007 9:15 pm

What on his pushbike :lol:

I have a BMC CDA airbox on mine, sounds evil. Extra power - No probably not but the sound sure makes it worth while.
Image
slippo
E30 Zone Newbie
E30 Zone Newbie
Posts: 114
Joined: Thu Dec 21, 2006 11:00 pm
Location: north east london

Post Sun Jan 28, 2007 9:18 pm

can you break that down for me, whats bmc cda? sounds cool tho
snoops
Major Helmet
Posts: 2828
Joined: Fri Nov 03, 2006 11:00 pm
Location: Time running out for me on the Zone

Post Sun Jan 28, 2007 9:21 pm

thats the name of it bmc cda i forgot to mention that but the sound does make it worth while, bsically all ull get off an induction kit is a nice sound probablyacouple more horses but nothing ull notice
d6dph
Married to the E30 Zone
Married to the E30 Zone
Posts: 12435
Joined: Sun Aug 14, 2005 11:00 pm
Location: Tiptree. Essex

Post Sun Jan 28, 2007 9:22 pm

BMC Is the brand, CDA is the product (Carbon Dynamic Airbox iirc), Basically a sealed airfilter.

Zoneshop sells them : http://www.xsperformance.co.uk/e30zone/ ... ucts_id=20

A short in-car clip of my 325 fitted with the BMC. It is not a quiet system. : Image
Image
maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Sun Jan 28, 2007 9:25 pm

That sounds awesome dave :cool:
Image
d6dph
Married to the E30 Zone
Married to the E30 Zone
Posts: 12435
Joined: Sun Aug 14, 2005 11:00 pm
Location: Tiptree. Essex

Post Sun Jan 28, 2007 9:32 pm

Cheers dude, Nearly put the standard airbox back on the other day as it is quite loud, but then I went for a blast :twisted: :twisted: :twisted:
Image
cliffybabe
Powered by Nelly
Powered by Nelly
Posts: 10020
Joined: Sun Dec 18, 2005 11:00 pm
Location: Croydon

Post Sun Jan 28, 2007 9:35 pm

I like the standard box with a K&N element, I had a ITG but the standard box just feels better :cool:
Image
Considering Selling the Cabby, looks like its gonna go
snoops
Major Helmet
Posts: 2828
Joined: Fri Nov 03, 2006 11:00 pm
Location: Time running out for me on the Zone

Post Sun Jan 28, 2007 9:53 pm

that sounds sweet :D
cliffybabe
Powered by Nelly
Powered by Nelly
Posts: 10020
Joined: Sun Dec 18, 2005 11:00 pm
Location: Croydon

Post Mon Jan 29, 2007 1:03 am

The best bit my K&N element was free i nicked it out of a breaker at the scrappy winkeye
Image
Considering Selling the Cabby, looks like its gonna go
Rosc0PColtrane
Married to the E30 Zone
Married to the E30 Zone
Posts: 9757
Joined: Tue Mar 01, 2005 11:00 pm
Location: With Ceiling cat, watching you masturbate.

Post Mon Jan 29, 2007 8:45 am

loads of opinions on induction. Have had K&N 57i and now have a pipercross kit. The K&N at the time used a plastic braket to mount it to the air mass meter or AFm or whatever you want to call it. The braket gets brittle and eventually breaks. K&N refused to even sell me a replacement without a receipt (after 2 years of ownership). The whole kit felt very general and non specific to fit. Certainly not E30 specific, if that makes sense.

I never even noticed it had fallen off. Replaced it with a pipercross cone. It's a one pice system and is all machined aluminium. Far better quality than the K&N. It certainly felt more urgent to me.

Oh and as for heat shields, yeah great idea, although there's an article somewhere which measured engine bay temps to this end. In summary, it said there's very little difference in temp between engine bay and outside. Perhaps there is a bigger difference when you are stop starting around town, but I guess you hardly need top performance stuck in traffic!

That's just my opinion based on my experienced.
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Mon Jan 29, 2007 8:03 pm

d6dph wrote:A short in-car clip of my 325 fitted with the BMC. It is not a quiet system.
i thought you were about to show off your brakes as well when that transit pulled out!!!! 8O
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
d6dph
Married to the E30 Zone
Married to the E30 Zone
Posts: 12435
Joined: Sun Aug 14, 2005 11:00 pm
Location: Tiptree. Essex

Post Mon Jan 29, 2007 8:29 pm

Nah it's fine, Was using my indicators so he knew I was turning. :lol:
Image
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Mon Jan 29, 2007 8:50 pm

i hoped that was the case!
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
Andy335Touring
Married to the E30 Zone
Married to the E30 Zone
Posts: 7144
Joined: Sun Jan 09, 2005 11:00 pm
Location: Long Eaton,Nottingham

Post Mon Jan 29, 2007 10:34 pm

maxfield wrote:That sounds awesome dave :cool:
Sure does, just hope it sounds as good on my M30 when i get one :cool:
e36boy
E30 Zone Addict
E30 Zone Addict
Posts: 2353
Joined: Sun Apr 16, 2006 11:00 pm
Location: The Chatsworth

Post Mon Jan 29, 2007 11:21 pm

blatantarrogance wrote:loads of opinions on induction. Have had K&N 57i and now have a pipercross kit. The K&N at the time used a plastic braket to mount it to the air mass meter or AFm or whatever you want to call it. The braket gets brittle and eventually breaks. K&N refused to even sell me a replacement without a receipt (after 2 years of ownership). The whole kit felt very general and non specific to fit. Certainly not E30 specific, if that makes sense.

I never even noticed it had fallen off. Replaced it with a pipercross cone. It's a one pice system and is all machined aluminium. Far better quality than the K&N. It certainly felt more urgent to me.

Oh and as for heat shields, yeah great idea, although there's an article somewhere which measured engine bay temps to this end. In summary, it said there's very little difference in temp between engine bay and outside. Perhaps there is a bigger difference when you are stop starting around town, but I guess you hardly need top performance stuck in traffic!

That's just my opinion based on my experienced.
How much is the pipercross one ?
User avatar
ash-e30
E30 Zone Regular
E30 Zone Regular
Posts: 394
Joined: Mon Jan 22, 2007 11:00 pm

Post Mon Jan 29, 2007 11:56 pm

maxfield wrote:That sounds awesome dave :cool:
he said it all :D
Rosc0PColtrane
Married to the E30 Zone
Married to the E30 Zone
Posts: 9757
Joined: Tue Mar 01, 2005 11:00 pm
Location: With Ceiling cat, watching you masturbate.

Post Wed Jan 31, 2007 11:06 am

e36boy wrote:
blatantarrogance wrote:loads of opinions on induction. Have had K&N 57i and now have a pipercross kit. The K&N at the time used a plastic braket to mount it to the air mass meter or AFm or whatever you want to call it. The braket gets brittle and eventually breaks. K&N refused to even sell me a replacement without a receipt (after 2 years of ownership). The whole kit felt very general and non specific to fit. Certainly not E30 specific, if that makes sense.

I never even noticed it had fallen off. Replaced it with a pipercross cone. It's a one pice system and is all machined aluminium. Far better quality than the K&N. It certainly felt more urgent to me.

Oh and as for heat shields, yeah great idea, although there's an article somewhere which measured engine bay temps to this end. In summary, it said there's very little difference in temp between engine bay and outside. Perhaps there is a bigger difference when you are stop starting around town, but I guess you hardly need top performance stuck in traffic!

That's just my opinion based on my experienced.
How much is the pipercross one ?
IRO 90 nicker mate?
Skip
E30 Zone Regular
E30 Zone Regular
Posts: 309
Joined: Fri Apr 15, 2005 11:00 pm
Location: Norfolk

Post Wed Jan 31, 2007 1:15 pm

d6dph wrote:BMC Is the brand, CDA is the product (Carbon Dynamic Airbox iirc), Basically a sealed airfilter.

Zoneshop sells them : http://www.xsperformance.co.uk/e30zone/ ... ucts_id=20

A short in-car clip of my 325 fitted with the BMC. It is not a quiet system. : Image
Dave, what exhaust are you using, or is all that noise the airbox?? :eek:
ex-325i Touring
d6dph
Married to the E30 Zone
Married to the E30 Zone
Posts: 12435
Joined: Sun Aug 14, 2005 11:00 pm
Location: Tiptree. Essex

Post Wed Jan 31, 2007 7:09 pm

Most of the noise you hear on that video is airbox, it's quite loud tbh.

The exhaust is a powerflow system.

Don't forget the camera is sitting above the taxdisc holder and is virtually pointing at the engine, so will sound a bit louder than it is. The BMC has a real resonance at certain revs so can be a little annoying on long journeys, but I'm past caring. Sounds great imo :D
Image
chinchilla
E30 Zone Regular
E30 Zone Regular
Posts: 743
Joined: Mon Aug 21, 2006 11:00 pm
Location: Cardiff!

Post Sun Feb 11, 2007 4:38 pm

im going to get one for my 320i just for the sound! its sounds so vicious!
dazleeds
old skool raver
old skool raver
Posts: 12883
Joined: Fri Apr 01, 2005 11:00 pm
Location: Empire Building @

Post Sun Feb 11, 2007 4:42 pm

d6dph wrote:Most of the noise you hear on that video is airbox, it's quite loud tbh.

The exhaust is a powerflow system.

Don't forget the camera is sitting above the taxdisc holder and is virtually pointing at the engine, so will sound a bit louder than it is. The BMC has a real resonance at certain revs so can be a little annoying on long journeys, but I'm past caring. Sounds great imo :D
fair play matye

sounds nice and throaty

just 1 thing

how come the car wasnt squealing round the bends with its arse out winkeye
www.oldskoolfantasy.co.uk
in the shit,the one to blame,yeh its all my fault ;)
snoops
Major Helmet
Posts: 2828
Joined: Fri Nov 03, 2006 11:00 pm
Location: Time running out for me on the Zone

Post Sun Feb 11, 2007 5:13 pm

that sounds sweet, my 325s calling out for 1 of them lol
d6dph
Married to the E30 Zone
Married to the E30 Zone
Posts: 12435
Joined: Sun Aug 14, 2005 11:00 pm
Location: Tiptree. Essex

Post Sun Feb 11, 2007 6:19 pm

dazleeds wrote:
d6dph wrote:Most of the noise you hear on that video is airbox, it's quite loud tbh.

The exhaust is a powerflow system.

Don't forget the camera is sitting above the taxdisc holder and is virtually pointing at the engine, so will sound a bit louder than it is. The BMC has a real resonance at certain revs so can be a little annoying on long journeys, but I'm past caring. Sounds great imo :D
fair play matye

sounds nice and throaty

just 1 thing

how come the car wasnt squealing round the bends with its arse out winkeye
Because I drive like a girly...... No Worse than a girly :lol:
Image