318is with TBs.

Need technical Q/A then you're in the right place

Moderator: martauto

M3Compact
E30 Zone Regular
E30 Zone Regular
Posts: 506
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Jan 25, 2007 7:43 pm

Sorry if it's been asked before, had a search and couldn't find an answer.

Throttle bodies on an M42?

Easy/BMW option from an S14 or other?

Available off the shelf?

Anyone running twin side-draughts?

I found this, but the link doesn't work. :cry: (Restricted area :? )

Andy335Touring wrote:Have you seen this thread ?

Lots of M42 info !

http://www.e30zone.co.uk/modules.php?na ... ic&t=24173
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Thu Jan 25, 2007 7:46 pm

it can/has been done... tim_s has put them on his M42 lump

i think i'd like to have a go too

am i right in saying that you know a lot about limited slip differentials?
Image
M3Compact
E30 Zone Regular
E30 Zone Regular
Posts: 506
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Jan 25, 2007 7:52 pm

stuartgallafant wrote:it can/has been done... tim_s has put them on his M42 lump

i think i'd like to have a go too

am i right in saying that you know a lot about limited slip differentials?
I've a fair amount of experience with BMW/ZF LSD units, what's the problem with it?

I think the link that went to the 'restricted area' may have been Tim-s's thread, can't find it. :cry:
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Thu Jan 25, 2007 7:55 pm

do a search, that should bring it up

there's a thread on here about LSD units, i think its called LSD rebuild or something like that, and your name was mentioned!

i think there is a few of us that want to rebuild our diffs, as i know mine doesn't feel like it wants to lock up properly...
Image
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Thu Jan 25, 2007 7:58 pm

Dbilas do some tb's off the shelf for the iS, not sure how much work it takes to fit them though.
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
Andy335Touring
Married to the E30 Zone
Married to the E30 Zone
Posts: 7144
Joined: Sun Jan 09, 2005 11:00 pm
Location: Long Eaton,Nottingham

Post Thu Jan 25, 2007 10:09 pm

M3Compact
E30 Zone Regular
E30 Zone Regular
Posts: 506
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Jan 25, 2007 11:15 pm

Andy335Touring wrote:Try this( .co.uk -> .net) :thumb:

http://www.e30zone.net/modules.php?name ... ic&t=24173
Thanks Andy. :cool:

Lots to read/take in. I've looked at the S42 options - but they're beyond the budget. :(

We're building another car with a 4-pot, we've got a dry-sumped 2.3 S14 - but wanting a 2.0L and an M42 would make more sense in an E36, if we can get > 200 BHP reliably.

I sold an M42 to Jon Finch ages ago, and I've found a couple of his posts (Jono). Would be good to compare notes with him and Tim_s. :P
e21Jason
E30 Zone Addict
E30 Zone Addict
Posts: 2040
Joined: Tue Jan 11, 2005 11:00 pm
Location: Dubai, UAE

Post Fri Jan 26, 2007 12:44 pm

Hi

I probaly easier to build a 2.0 s14 than throtle bodes one a m42 as the rest of the package is of the shelf.

The 2.0l is uses a 71.6mm crank and 148mm rods but apart from that the rest of the engine is the same, I am building a 2.0l s14 for the same reason.

You can usally pick the parts up from s14.net


also try www.m42club.com

Jason
M3Compact
E30 Zone Regular
E30 Zone Regular
Posts: 506
Joined: Mon Jan 10, 2005 11:00 pm

Post Fri Jan 26, 2007 3:27 pm

e21Jason wrote:Hi

I probaly easier to build a 2.0 s14 than throtle bodes one a m42 as the rest of the package is of the shelf.

The 2.0l is uses a 71.6mm crank and 148mm rods but apart from that the rest of the engine is the same, I am building a 2.0l s14 for the same reason.

You can usally pick the parts up from s14.net


also try www.m42club.com

Jason
Hi Jason, I've looked at the option of using a 320is crank, there are a few reasons why an M42 is more appropriate for me.

The crank that I have has just had £Â£Ã‚£ spent on it with lightening/balancing and it seems a waste not to use it. I've also looked at using pistons with the 2.5 bore that have the gudgeon pin set at 2.3 height, if it isn't less than 2.0L (for 2.0L class), it might as well be 2.4 or 2.5 for my use.

My S14 block has been irreversibly modified for dry-sump which I don't want to use - but fitting an S14 in an E36 isn't straightforward without dry-sumping it.

More importantly, there are possible regulation changes in the future that might prevent the use of an S14 in an E36.

If it's possible to get 200+ BHP from a 2.0L M42/M44, it would be preferable to using an S14.
E30BeemerLad
Married to the E30 Zone
Married to the E30 Zone
Posts: 16806
Joined: Mon Mar 28, 2005 11:00 pm
Location: Norfolk

Post Fri Jan 26, 2007 3:32 pm

get some bike carbs on there

www.boggbros.co.uk
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Fri Jan 26, 2007 5:06 pm

why when i click on the links does it keep coming up with 'restriced'?
Image
User avatar
tim_s
E30 Zone Squatter
E30 Zone Squatter
Posts: 1661
Joined: Thu Feb 03, 2005 11:00 pm
Location: Bristol/London

Post Fri Jan 26, 2007 5:19 pm

anyone want to buy my ITBs and MS off me?
Image
2.1 318is, MS, LPG. 200bhp, 175ft/lbs GONE!
Boxster, e46 m3, e36 sport touring and alpina B3 3.0
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Fri Jan 26, 2007 5:20 pm

tim_s wrote:anyone want to buy my ITBs and MS off me?
how much for? what size bore are your TB's
Image
User avatar
tim_s
E30 Zone Squatter
E30 Zone Squatter
Posts: 1661
Joined: Thu Feb 03, 2005 11:00 pm
Location: Bristol/London

Post Fri Jan 26, 2007 5:44 pm

ITBs are 50mm (i.e huuge :cool: ), price depends on how much you want. I'm looking for £850 or best offer for them complete with the plenum/trumpets/piping, megasquirt, MAF, K+N, uprated injectors, vw aux air valve etc, or less without.
Image
2.1 318is, MS, LPG. 200bhp, 175ft/lbs GONE!
Boxster, e46 m3, e36 sport touring and alpina B3 3.0
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Fri Jan 26, 2007 5:48 pm

why are you selling?

50mm is huge!!!
Image
User avatar
tim_s
E30 Zone Squatter
E30 Zone Squatter
Posts: 1661
Joined: Thu Feb 03, 2005 11:00 pm
Location: Bristol/London

Post Fri Jan 26, 2007 6:03 pm

cos im not using them at all at the mo. im doing loads of motorway miles and a lot of london town driving, for which they are a complete waste of time. they are noisier than factory on the motorway at above 85 (though prob less than you'd imagine), and the missus doesn't like them for driving in traffic, although tbh i prob prefer them in traffic cos the throttle response is awesome!
the TBs are huge, but still get the same MPG with them crusing up motorway and doing city driving (for the obvious reason that they're never used), and the car goes quicker and has awesome response with them on. they are extremely cool, i'm pretty fed up with my car atm though and think realistically i need rid. a few people have been in the car with them in, the car is much faster at high rpm and just doesn't stop, also throttle response is extremely impressive. sad to see them go, but a small end bush appears to have gone on my engine which has made me really pissed. its back off to the engineering firm that screwed it up in the first place tomorrow if i can haul it out by midday.
Image
2.1 318is, MS, LPG. 200bhp, 175ft/lbs GONE!
Boxster, e46 m3, e36 sport touring and alpina B3 3.0
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Fri Jan 26, 2007 6:06 pm

sad to hear that tim. i hope you can get this sorted, coz i know how hard you've worked on this engine

i havnt seen you on here for ages mate! where you been anyway?
Image
User avatar
tim_s
E30 Zone Squatter
E30 Zone Squatter
Posts: 1661
Joined: Thu Feb 03, 2005 11:00 pm
Location: Bristol/London

Post Sat Jan 27, 2007 3:00 pm

cheers mate. i've been pretty busy with this and that so not been on here much. car was running really well before the small end prob, am gutted! got the bottom end to the engine shop today though and they're gonna make sure it is the small end and replace all the bronze small end bushes with steel-backed ones as they reckon with my high CR/rpm etc it was too much for bronze small ends. quite surprised at that! they're going to lighten and balance the flywheel, fit new pressure plate, rear crank seal, windage tray/oil deflector, oil pump etc. too, and do it as quick as poss so i'm back on the road soon with rebuilt bottom end and my new late tarted up e36 head. feeling much more positive today. :cool:
Image
2.1 318is, MS, LPG. 200bhp, 175ft/lbs GONE!
Boxster, e46 m3, e36 sport touring and alpina B3 3.0
M3Compact
E30 Zone Regular
E30 Zone Regular
Posts: 506
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Jan 27, 2007 8:10 pm

Ta for info and PM Tim. 8)

Could possibly be interested in TBs etc, still trying to gather info. :?

Any quick suggestions for a bottom end using M42 crank? (Pistons? Capacity?)

Which 'other car' solid lifters can be used?

Is the E30 M42 flywheel one piece for lightening? Any other BMW one piece flywheels fit, that use a bigger clutch?

Power with standard valve sizes and 284/276 cams/TBs/stand alone management etc?

Hope you get yours sorted. :(
maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Sat Jan 27, 2007 8:14 pm

Would these fit M3/S14
Image
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Sat Jan 27, 2007 8:53 pm

simon, i've just aquired an M20 flywheel for my M42. 6 or 7 kgs lighter and fits straight on, you just need to change the s/motor pinion

whats all this about solid lifters?

and also, what is so good about the E36 head???
Image
Dan318-is
Married to the E30 Zone
Married to the E30 Zone
Posts: 8006
Joined: Wed Jul 06, 2005 11:00 pm
Location: Surrey/London

Post Sat Jan 27, 2007 10:30 pm

maxfield wrote:Would these fit M3/S14
Would what fit the s14? pretty much nothing between the m42 and the s14 are related, they are totally different hybrids.
stuartgallafant wrote:simon, i've just aquired an M20 flywheel for my M42. 6 or 7 kgs lighter and fits straight on, you just need to change the s/motor pinion

whats all this about solid lifters?

and also, what is so good about the E36 head???
Yes but the m20 flywheel is a ridiculous amount of machining and work to fit it unless like yourself you have the engine out.

Vw solid lifters can be used (im not exactly sure which ones), but unless yoru revving stupidly high, which i dont think you are stu its a waste of time.
maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Sat Jan 27, 2007 10:33 pm

Dan318-is wrote:
maxfield wrote:Would these fit M3/S14
Would what fit the s14? pretty much nothing between the m42 and the s14 are related, they are totally different hybrids.
The ITBs

but i seem to remember they are from an M3 now???
Image
e21Jason
E30 Zone Addict
E30 Zone Addict
Posts: 2040
Joined: Tue Jan 11, 2005 11:00 pm
Location: Dubai, UAE

Post Sat Jan 27, 2007 10:36 pm

Tim usesed e36 m3 throttle bodies, not s14

Jason
Dan318-is
Married to the E30 Zone
Married to the E30 Zone
Posts: 8006
Joined: Wed Jul 06, 2005 11:00 pm
Location: Surrey/London

Post Sat Jan 27, 2007 10:37 pm

They were from an e36 m3, not from an s14; i think the s14 bore was too small? Like i said hardly anything is interchangable;
maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Sat Jan 27, 2007 10:41 pm

Ah right

That exlpains it
Image
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Sun Jan 28, 2007 11:29 am

dan, im aaming for a rev limit of about 7250... would i need/want solid lifters for this?

i though solid lifters were better anyway for a bit more response from the engine? or am i wrong?
Image
User avatar
tim_s
E30 Zone Squatter
E30 Zone Squatter
Posts: 1661
Joined: Thu Feb 03, 2005 11:00 pm
Location: Bristol/London

Post Sun Jan 28, 2007 12:10 pm

nah, solids are more trouble than they're worth on a road car imo. cos they run looser tolerances they'll actually mean you lose a bit of cam profile too, and shimming is annoying, and its a cam-out job on the IS. Unless you're anal and frequently do the clearances, they'll be noisier too. imo hyds are much better, at least they are on a car that's in regular use. my old golf had solids and they were ok and fairly quiet, but not as good as hyds and required maitenence. There are a load of different lifters you can use to fit, the origs aren't supposed to be very good, they're well heavy and allegedly overpump at high rpm (i've never had them in my engine at over 7k so can't verify this). i have lightweight hyd lifters in mine that don't overpump with our oil pressure at high rpm. even the later bmw lifters are a bit lighter and better allegedly (i have loads of spares of these btw!). unless seriously messing with the engine the standard lifters should be fine though. i wouldn't worry too much if going for a 7,2k ish limit and not doing a big bucks rebuild.

simon, using max safe bore for NA would give you 1925cc with m42 crank; you could push the bores more but you'd be nuts to imo. would make a pretty cool short-stroke engine, i'd prefer to go squarer though, depends what characteristics you're looking for i guess.
Image
2.1 318is, MS, LPG. 200bhp, 175ft/lbs GONE!
Boxster, e46 m3, e36 sport touring and alpina B3 3.0
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Sun Jan 28, 2007 12:14 pm

so do you reccomend i use the light weight ones then tim?
Image
User avatar
tim_s
E30 Zone Squatter
E30 Zone Squatter
Posts: 1661
Joined: Thu Feb 03, 2005 11:00 pm
Location: Bristol/London

Post Sun Jan 28, 2007 12:25 pm

depends how far you want to go. i'd prob say keep it standard for now mate, or raid the bm parts bin and stick some later ones in (as long as they cost you next to nothing). If you suspect you're overpumping at high rpms once the engine's in, then change them.
Power with standard valve sizes and 284/276 cams/TBs/stand alone management etc?
on a 2.0 i'd suspect you'd be nicely over the 200bhp mark mate, but never done that exact spec myself so couldn't say. place in the states that built a 2.1 on standard-ish inlet claimed 205bhp and they used similar cam profiles to that.

i reckon as i've mentioned before to use an XE for comparison, you'll realise onmost stats you'll come out more favourably than an XE, and these with TBs and mild cams make 200bhp.
Image
2.1 318is, MS, LPG. 200bhp, 175ft/lbs GONE!
Boxster, e46 m3, e36 sport touring and alpina B3 3.0
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Sun Jan 28, 2007 2:13 pm

ok tim.

whats an XE?
Image
fuzzy
He who sleeps with "Gingers"
Posts: 14351
Joined: Sat Jun 04, 2005 11:00 pm
Location: melbourne Australia

Post Sun Jan 28, 2007 2:17 pm

stuartgallafant wrote:ok tim.

whats an XE?
isnt that one of them vauxhaul lumps :eek:
maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Sun Jan 28, 2007 2:21 pm

fuzzy wrote:
stuartgallafant wrote:ok tim.

whats an XE?
isnt that one of them vauxhaul lumps :eek:
I do believe it is red top
Image
Dan318-is
Married to the E30 Zone
Married to the E30 Zone
Posts: 8006
Joined: Wed Jul 06, 2005 11:00 pm
Location: Surrey/London

Post Sun Jan 28, 2007 2:24 pm

Laugh all you want the red tops are fantastic engines. Even in standard form they would piss on a 325i and trouble most standard s14's especially the state they are in these days. Iv seen a twin engined nova beat r34 skylines round silverstone and they were trying too.
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Sun Jan 28, 2007 2:25 pm

oh, the 16V red-top lumps!! they're rapid!!!
Image