Hi - seems that in additional the engine mounts I've got more work todo. I couple of people have mentioned slave cylinder is the problem.
I drive in the morning and left my car park in a cark park, came back to it drove off fine, two minutes down the road I noticed the bite point on the clutch was getting lower and lower until the clutch wouldn't disengage. Opened the bonnet to find it was out of fluid, topped it back up and got home only using the clutch to pull off. Left it for a few hours, came back and it had emptied itself of fluid again.
Anyway - question is, do you guys agree with it being slave cylinder and if so - how do I change it ?
slave cylinder
Moderator: martauto
-
hoshy
- E30 Zone Wiki Guru

- Posts: 4118
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Munich
E46 M3 CSL but dreaming of another E30.
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
Well, it's most likely the slave, but could be the master or even the hose from the reservoir to the master (could also be the rigid line, but it's very unlikely).
Check the reservoir hose first, if that's OK then it's one of the cylinders, but replace both master the slave.
Master unbolts from inside the drivers' footwell and is fiddly / time consuming, slave simply unbolts from the LHS of the gearbox, access from underneath the car. Bleeding the system will take some time if you do it manually.
Check the reservoir hose first, if that's OK then it's one of the cylinders, but replace both master the slave.
Master unbolts from inside the drivers' footwell and is fiddly / time consuming, slave simply unbolts from the LHS of the gearbox, access from underneath the car. Bleeding the system will take some time if you do it manually.
-
hoshy
- E30 Zone Wiki Guru

- Posts: 4118
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Munich
Thanks. I'll check the things you mentioned first. Any way to determine if the master or slave needs doing? I'm not keeping this turd more than two months and just want it driveable in the meantime.
Cheers,
Ashley
Cheers,
Ashley
E46 M3 CSL but dreaming of another E30.
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
hoshy
- E30 Zone Wiki Guru

- Posts: 4118
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Munich
lol- good point. will check later.
E46 M3 CSL but dreaming of another E30.
-
hoshy
- E30 Zone Wiki Guru

- Posts: 4118
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Munich
just one more thing. On GSF they have master and slave cylinders but there's two listed - each type has " ... cylinder" and "... cylinder-BQ".
the BQ is more expensive, is this an OEM one, or are that completely different parts?
the BQ is more expensive, is this an OEM one, or are that completely different parts?
E46 M3 CSL but dreaming of another E30.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
BQ ones are likely to be from one of BMW's OE manufactuers. (They use more than one).
The cheap ones are just that!
The cheap ones are just that!
-
hoshy
- E30 Zone Wiki Guru

- Posts: 4118
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Munich
cheap one it is - see above post for rationale.
E46 M3 CSL but dreaming of another E30.
-
hoshy
- E30 Zone Wiki Guru

- Posts: 4118
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Munich
ok - slave is out. just waiting for housemate to get me to GSF and I'm good to go.
What's the procedure for bleeding?
1. undo nipple
2. press pedal
3. lock nipple.
4. pedal up
5. repeat
??
What's the procedure for bleeding?
1. undo nipple
2. press pedal
3. lock nipple.
4. pedal up
5. repeat
??
E46 M3 CSL but dreaming of another E30.
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
uup
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
hoshy
- E30 Zone Wiki Guru

- Posts: 4118
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Munich
cheers.
Would have had this completed yesterday but I missed the closing time for GSF so gonna try and get part tomorrow.
No driving to work for me tomorrow
Would have had this completed yesterday but I missed the closing time for GSF so gonna try and get part tomorrow.
No driving to work for me tomorrow
E46 M3 CSL but dreaming of another E30.

