bbs centres...sorry if this is daft question....please help.

Need technical Q/A then you're in the right place

Moderator: martauto

muleskinner
E30 Zone Newbie
E30 Zone Newbie
Posts: 165
Joined: Fri Aug 19, 2005 11:00 pm

Post Sun Oct 01, 2006 7:50 pm

I bought some stonking 15inch BBS 15inch alloys of fellow zoner , spadge ( top bloke ) , but i have bought 4 bbs centres to fit the wheels of an ebay seller.

does anyone know if there is a knack to fitiing these things or can anyone confirm the correct bmw part number , because I cant get them to fit.

oh and what does the small arrow on the centre mean.

They look like 15 inch centres and bbs in appearance.

cheers

mule.
Chris-W
E30 Zone Team Member
E30 Zone Team Member
Posts: 7219
Joined: Tue May 24, 2005 11:00 pm
Location: South Cheshire

Post Sun Oct 01, 2006 8:05 pm

You should just push the cap on and twist the centre clockwise until it clicks.
Image
User avatar
domross
E30 Zone Newbie
E30 Zone Newbie
Posts: 138
Joined: Sat Jan 21, 2006 11:00 pm

Post Sun Oct 01, 2006 8:05 pm

Should just fit over the centre of the wheels and then twist to lock into place...
jmc330i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6621
Joined: Mon Jan 10, 2005 11:00 pm
Location: Somerset

Post Sun Oct 01, 2006 8:09 pm

Can you post a pic of them (both sides)? Should be able to tell if they are genuine.

As was said, they push on and the centre (nut shaped bit) twists until its locks on.
James
'91 325i Sport
'93 318i touring 16v
muleskinner
E30 Zone Newbie
E30 Zone Newbie
Posts: 165
Joined: Fri Aug 19, 2005 11:00 pm

Post Sun Oct 01, 2006 8:10 pm

photos hang on..............


part number : 36 13-1 179 828 61 247 00 on rear

Image


Image
Last edited by muleskinner on Sun Oct 01, 2006 8:19 pm, edited 1 time in total.
tomtomiS
E30 Zone Camper
E30 Zone Camper
Posts: 1216
Joined: Sun Aug 21, 2005 11:00 pm
Location: Cricket Hill, Yateley

Post Sun Oct 01, 2006 8:11 pm

unless like myself, u took ur car to a tyre place and made the mistake of trusting the fitter. bastard broke one of my centrecaps and it doesnt lock into place, doh!
Bob_S
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5412
Joined: Sat Jun 11, 2005 11:00 pm
Location: chester, cheshire

Post Sun Oct 01, 2006 8:13 pm

14" centres wont fit 15" wheels mate. You need the 15" centres. 15" centres off an e34 wont fit you need e30 15" centres which lock when you turn the big nut. IF you have the correct ones, it's a case of turn as far to the left as poss. place on the wheel should locate on 3 pins on the wheel it will then go flush. now get hold of your big nut and turn to the right, it will do about 1/4 turn then click and stop. the cap is on and secure.
Bollocks to this 24v scrap!
SPADGE
Married to the E30 Zone
Married to the E30 Zone
Posts: 7373
Joined: Wed Aug 09, 2006 11:00 pm
Location: Milton Keynes, Bucks

Post Sun Oct 01, 2006 8:13 pm

If they have an arrow on them mate they are probably plastic E34 push fit ones and won't fit your wheels!
muleskinner
E30 Zone Newbie
E30 Zone Newbie
Posts: 165
Joined: Fri Aug 19, 2005 11:00 pm

Post Sun Oct 01, 2006 8:25 pm

F**K sake this aint happening..........

not again...fucking ebay selling WANKERS.
jmc330i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6621
Joined: Mon Jan 10, 2005 11:00 pm
Location: Somerset

Post Sun Oct 01, 2006 8:30 pm

Sorry mate, doesnt look like an E30 15" centre cap :cry:
James
'91 325i Sport
'93 318i touring 16v
muleskinner
E30 Zone Newbie
E30 Zone Newbie
Posts: 165
Joined: Fri Aug 19, 2005 11:00 pm

Post Sun Oct 01, 2006 8:36 pm

does anyone have an e30 picture of a bbs centre or the correct part number

cheers

mule.
kam325itouring
E30 Zone Regular
E30 Zone Regular
Posts: 692
Joined: Sun Apr 02, 2006 11:00 pm
Location: london

Post Sun Oct 01, 2006 8:41 pm

dude they are not e30 ones they are e34 one by the look of it!!! sorry....... the e30 ones have metal plates and plastic lock in nuts, i found this out cos i just got my wheels refurbed and i had to splits the centres all apart!!!!
muleskinner
E30 Zone Newbie
E30 Zone Newbie
Posts: 165
Joined: Fri Aug 19, 2005 11:00 pm

Post Sun Oct 01, 2006 8:43 pm

cheers dude.......

fucks sake.

I am really starting to get miffed off with fucking ebay.
jmc330i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6621
Joined: Mon Jan 10, 2005 11:00 pm
Location: Somerset

Post Sun Oct 01, 2006 8:50 pm

muleskinner wrote:does anyone have an e30 picture of a bbs centre or the correct part number
Can get a couple pics tomorrow for you :thumb:
James
'91 325i Sport
'93 318i touring 16v
muleskinner
E30 Zone Newbie
E30 Zone Newbie
Posts: 165
Joined: Fri Aug 19, 2005 11:00 pm

Post Sun Oct 01, 2006 8:51 pm

CHEERS JAMES....
kam325itouring
E30 Zone Regular
E30 Zone Regular
Posts: 692
Joined: Sun Apr 02, 2006 11:00 pm
Location: london

Post Sun Oct 01, 2006 8:59 pm

e bay is just a big con mate i ve been stung loads of times, dont trust it as far as i can spit!!!!!! id rather spend a bit extra and get it from euros gsf or even dealers!!!!!
SPADGE
Married to the E30 Zone
Married to the E30 Zone
Posts: 7373
Joined: Wed Aug 09, 2006 11:00 pm
Location: Milton Keynes, Bucks

Post Sun Oct 01, 2006 9:11 pm

They are deffo E34 type ones mate!
I'll nip down and get you the part number off a proper e30 one right now and post here in a sec.
SPADGE
Married to the E30 Zone
Married to the E30 Zone
Posts: 7373
Joined: Wed Aug 09, 2006 11:00 pm
Location: Milton Keynes, Bucks

Post Sun Oct 01, 2006 9:14 pm

09-23-117 is on the ones i have here mate
muleskinner
E30 Zone Newbie
E30 Zone Newbie
Posts: 165
Joined: Fri Aug 19, 2005 11:00 pm

Post Sun Oct 01, 2006 9:18 pm

Spadge

have they got 09.24.029 on the inside?
Gortour
E30 Zone Team Member
E30 Zone Team Member
Posts: 9025
Joined: Sat Sep 23, 2006 11:00 pm
Location: Poole, Dorset

Post Sun Oct 01, 2006 9:21 pm

Got the 15" wheels on my Tourer. Anyone know a cheap place to get hold of a spanner for that big centrecap nut? I've seen one in a friend's toolkit on her Sport, but haven't got one for mine. :(
Currently slumming it in an E46 Touring
SPADGE
Married to the E30 Zone
Married to the E30 Zone
Posts: 7373
Joined: Wed Aug 09, 2006 11:00 pm
Location: Milton Keynes, Bucks

Post Sun Oct 01, 2006 9:23 pm

muleskinner wrote:Spadge

have they got 09.24.029 on the inside?
Errrr hang on lol :cry:
SPADGE
Married to the E30 Zone
Married to the E30 Zone
Posts: 7373
Joined: Wed Aug 09, 2006 11:00 pm
Location: Milton Keynes, Bucks

Post Sun Oct 01, 2006 9:32 pm

Right here are a couple of pics of a proper BBS E30 cap as you can see it comes in several parts. Note no arrow on the front as unlike the E34 plastic caps these can go on in many ways and not just 1 way round!
The number is just gave you is on the black ring shown in the photo and is 09.23.117 on the back of the badge is the only other part number i can see which is 09.24.030
I just pulled one of the caps of my E34 and it has the same part number you mentioned earlier!

Image
Image
muleskinner
E30 Zone Newbie
E30 Zone Newbie
Posts: 165
Joined: Fri Aug 19, 2005 11:00 pm

Post Sun Oct 01, 2006 9:35 pm

cheers spadge

ive seen and read enough..........

fucks sake...

thanks

tony.
SPADGE
Married to the E30 Zone
Married to the E30 Zone
Posts: 7373
Joined: Wed Aug 09, 2006 11:00 pm
Location: Milton Keynes, Bucks

Post Sun Oct 01, 2006 9:37 pm

muleskinner wrote:cheers spadge

ive seen and read enough..........

fucks sake...

thanks

tony.
Sorry Tony :(
Did you pay much for those caps?
Genuine ones tend to go for upwards of 50 quid a set and singles for about 20 quid upwards.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Oct 01, 2006 10:35 pm

SPADGE wrote:
muleskinner wrote:cheers spadge

ive seen and read enough..........

fucks sake...

thanks

tony.
Sorry Tony :(
Did you pay much for those caps?
Genuine ones tend to go for upwards of 50 quid a set and singles for about 20 quid upwards.
And to make you happier still - the E34 ones are worth bu**er all.
Cut all the back off the E34 ones and glue them in place with silicon rubber.
A1BMW325iSport
E30 Zone Addict
E30 Zone Addict
Posts: 4239
Joined: Mon Jan 10, 2005 11:00 pm
Location: Mid Wales

Post Sun Oct 01, 2006 11:45 pm

hate when people pass the e34 ones off on ebay as e30 ones, i've chucked loads of e34 ones away no-one wants them now
muleskinner
E30 Zone Newbie
E30 Zone Newbie
Posts: 165
Joined: Fri Aug 19, 2005 11:00 pm

Post Mon Oct 02, 2006 9:32 am

I paid Ԛ£30 for the set.......

i tell ya never again....ebay.

You know I wouldnt dream of ripping someone off.

ill try cutting the back off and seeing if i can get them to even look like they fit right.

cheers

mule
Cloggy Saint
Old Skooler
Old Skooler
Posts: 8027
Joined: Sun Jan 09, 2005 11:00 pm
Location: zummerzet

Post Mon Oct 02, 2006 9:54 am

There's nothing wrong with ebay, it's great. Unfortunately some of the users are less than scrupulous
Image

E30 zone - promoting adult illiteracy since 2004
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Mon Oct 02, 2006 10:36 am

mine are threaded and screw on about three turns (16inch splitties)

mrlee
Image
cheesebox
E30 Zone Regular
E30 Zone Regular
Posts: 261
Joined: Sat Jun 11, 2005 11:00 pm
Location: Buxton, Derbyshire

Post Tue Jan 16, 2007 10:45 am

Brianmoooore wrote:And to make you happier still - the E34 ones are worth bu**er all.
Cut all the back off the E34 ones and glue them in place with silicon rubber.
Just read this Brian - is this a serious suggestion? Some turdhanger nicked all 4 off my 318is last night. I don't feel inclined to spend £50 on a new set when they'll probably just vanish again. The thought of electrifying them or did cross my mind though.
User avatar
Daadji
E30 Zone Newbie
E30 Zone Newbie
Posts: 66
Joined: Fri Nov 03, 2006 11:00 pm

Post Tue Jan 16, 2007 4:58 pm

Why dont you just go to bme dealer they are £28.09 brand new thats what you would pay off ebay anyway
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Tue Jan 16, 2007 8:37 pm

cheesebox wrote: Just read this Brian - is this a serious suggestion? .
Yes! -I've trimmed one back as an experiment, and it fits in the E30 wheel OK.
Very slightly smaller diameter than would be ideal, but close enough.
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Wed Jan 31, 2007 11:53 am

You can drill a small hole through the nut base and into the metal below (no need to drill the wheel itself!) while it is in the locked position, countersink the hole then screw in a small self-tapping screw as an effective anti-theft deterrent.
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
cheesebox
E30 Zone Regular
E30 Zone Regular
Posts: 261
Joined: Sat Jun 11, 2005 11:00 pm
Location: Buxton, Derbyshire

Post Wed Jan 31, 2007 12:06 pm

320iSE wrote:You can drill a small hole through the nut base and into the metal below (no need to drill the wheel itself!) while it is in the locked position, countersink the hole then screw in a small self-tapping screw as an effective anti-theft deterrent.
Brilliant idea. I was reluctant to put the replacement centres back on the car in case they got nicked again.
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Wed Jan 31, 2007 12:13 pm

320iSE wrote:You can drill a small hole through the nut base and into the metal below (no need to drill the wheel itself!) while it is in the locked position, countersink the hole then screw in a small self-tapping screw as an effective anti-theft deterrent.
what do you mean by 'nut base'?