bbs centres...sorry if this is daft question....please help.
Moderator: martauto
-
muleskinner
- E30 Zone Newbie

- Posts: 165
- Joined: Fri Aug 19, 2005 11:00 pm
I bought some stonking 15inch BBS 15inch alloys of fellow zoner , spadge ( top bloke ) , but i have bought 4 bbs centres to fit the wheels of an ebay seller.
does anyone know if there is a knack to fitiing these things or can anyone confirm the correct bmw part number , because I cant get them to fit.
oh and what does the small arrow on the centre mean.
They look like 15 inch centres and bbs in appearance.
cheers
mule.
does anyone know if there is a knack to fitiing these things or can anyone confirm the correct bmw part number , because I cant get them to fit.
oh and what does the small arrow on the centre mean.
They look like 15 inch centres and bbs in appearance.
cheers
mule.
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
domross
- E30 Zone Newbie

- Posts: 138
- Joined: Sat Jan 21, 2006 11:00 pm
Should just fit over the centre of the wheels and then twist to lock into place...
-
jmc330i
- Engaged to the E30 Zone

- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
Can you post a pic of them (both sides)? Should be able to tell if they are genuine.
As was said, they push on and the centre (nut shaped bit) twists until its locks on.
As was said, they push on and the centre (nut shaped bit) twists until its locks on.
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
muleskinner
- E30 Zone Newbie

- Posts: 165
- Joined: Fri Aug 19, 2005 11:00 pm
-
tomtomiS
- E30 Zone Camper

- Posts: 1216
- Joined: Sun Aug 21, 2005 11:00 pm
- Location: Cricket Hill, Yateley
unless like myself, u took ur car to a tyre place and made the mistake of trusting the fitter. bastard broke one of my centrecaps and it doesnt lock into place, doh!
-
Bob_S
- Engaged to the E30 Zone

- Posts: 5412
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: chester, cheshire
14" centres wont fit 15" wheels mate. You need the 15" centres. 15" centres off an e34 wont fit you need e30 15" centres which lock when you turn the big nut. IF you have the correct ones, it's a case of turn as far to the left as poss. place on the wheel should locate on 3 pins on the wheel it will then go flush. now get hold of your big nut and turn to the right, it will do about 1/4 turn then click and stop. the cap is on and secure.
Bollocks to this 24v scrap!
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
If they have an arrow on them mate they are probably plastic E34 push fit ones and won't fit your wheels!
-
muleskinner
- E30 Zone Newbie

- Posts: 165
- Joined: Fri Aug 19, 2005 11:00 pm
F**K sake this aint happening..........
not again...fucking ebay selling WANKERS.
not again...fucking ebay selling WANKERS.
-
jmc330i
- Engaged to the E30 Zone

- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
Sorry mate, doesnt look like an E30 15" centre cap 
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
muleskinner
- E30 Zone Newbie

- Posts: 165
- Joined: Fri Aug 19, 2005 11:00 pm
does anyone have an e30 picture of a bbs centre or the correct part number
cheers
mule.
cheers
mule.
-
kam325itouring
- E30 Zone Regular

- Posts: 692
- Joined: Sun Apr 02, 2006 11:00 pm
- Location: london
dude they are not e30 ones they are e34 one by the look of it!!! sorry....... the e30 ones have metal plates and plastic lock in nuts, i found this out cos i just got my wheels refurbed and i had to splits the centres all apart!!!!
-
muleskinner
- E30 Zone Newbie

- Posts: 165
- Joined: Fri Aug 19, 2005 11:00 pm
cheers dude.......
fucks sake.
I am really starting to get miffed off with fucking ebay.
fucks sake.
I am really starting to get miffed off with fucking ebay.
-
jmc330i
- Engaged to the E30 Zone

- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
Can get a couple pics tomorrow for youmuleskinner wrote:does anyone have an e30 picture of a bbs centre or the correct part number
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
kam325itouring
- E30 Zone Regular

- Posts: 692
- Joined: Sun Apr 02, 2006 11:00 pm
- Location: london
e bay is just a big con mate i ve been stung loads of times, dont trust it as far as i can spit!!!!!! id rather spend a bit extra and get it from euros gsf or even dealers!!!!!
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
They are deffo E34 type ones mate!
I'll nip down and get you the part number off a proper e30 one right now and post here in a sec.
I'll nip down and get you the part number off a proper e30 one right now and post here in a sec.
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
09-23-117 is on the ones i have here mate
-
muleskinner
- E30 Zone Newbie

- Posts: 165
- Joined: Fri Aug 19, 2005 11:00 pm
Spadge
have they got 09.24.029 on the inside?
have they got 09.24.029 on the inside?
-
Gortour
- E30 Zone Team Member

- Posts: 9025
- Joined: Sat Sep 23, 2006 11:00 pm
- Location: Poole, Dorset
Got the 15" wheels on my Tourer. Anyone know a cheap place to get hold of a spanner for that big centrecap nut? I've seen one in a friend's toolkit on her Sport, but haven't got one for mine. 
Currently slumming it in an E46 Touring
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
Errrr hang on lolmuleskinner wrote:Spadge
have they got 09.24.029 on the inside?
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
Right here are a couple of pics of a proper BBS E30 cap as you can see it comes in several parts. Note no arrow on the front as unlike the E34 plastic caps these can go on in many ways and not just 1 way round!
The number is just gave you is on the black ring shown in the photo and is 09.23.117 on the back of the badge is the only other part number i can see which is 09.24.030
I just pulled one of the caps of my E34 and it has the same part number you mentioned earlier!


The number is just gave you is on the black ring shown in the photo and is 09.23.117 on the back of the badge is the only other part number i can see which is 09.24.030
I just pulled one of the caps of my E34 and it has the same part number you mentioned earlier!


-
muleskinner
- E30 Zone Newbie

- Posts: 165
- Joined: Fri Aug 19, 2005 11:00 pm
cheers spadge
ive seen and read enough..........
fucks sake...
thanks
tony.
ive seen and read enough..........
fucks sake...
thanks
tony.
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
Sorry Tonymuleskinner wrote:cheers spadge
ive seen and read enough..........
fucks sake...
thanks
tony.
Did you pay much for those caps?
Genuine ones tend to go for upwards of 50 quid a set and singles for about 20 quid upwards.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
And to make you happier still - the E34 ones are worth bu**er all.SPADGE wrote:Sorry Tonymuleskinner wrote:cheers spadge
ive seen and read enough..........
fucks sake...
thanks
tony.![]()
Did you pay much for those caps?
Genuine ones tend to go for upwards of 50 quid a set and singles for about 20 quid upwards.
Cut all the back off the E34 ones and glue them in place with silicon rubber.
-
A1BMW325iSport
- E30 Zone Addict

- Posts: 4239
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Mid Wales
hate when people pass the e34 ones off on ebay as e30 ones, i've chucked loads of e34 ones away no-one wants them now
-
muleskinner
- E30 Zone Newbie

- Posts: 165
- Joined: Fri Aug 19, 2005 11:00 pm
I paid Ԛ£30 for the set.......
i tell ya never again....ebay.
You know I wouldnt dream of ripping someone off.
ill try cutting the back off and seeing if i can get them to even look like they fit right.
cheers
mule
i tell ya never again....ebay.
You know I wouldnt dream of ripping someone off.
ill try cutting the back off and seeing if i can get them to even look like they fit right.
cheers
mule
-
Cloggy Saint
- Old Skooler

- Posts: 8027
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: zummerzet
-
mrLEE30
- E30 Zone Team Member

- Posts: 6589
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Sweating buckets in Bahrain
mine are threaded and screw on about three turns (16inch splitties)
mrlee
mrlee

-
cheesebox
- E30 Zone Regular

- Posts: 261
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: Buxton, Derbyshire
Just read this Brian - is this a serious suggestion? Some turdhanger nicked all 4 off my 318is last night. I don't feel inclined to spend £50 on a new set when they'll probably just vanish again. The thought of electrifying them or did cross my mind though.Brianmoooore wrote:And to make you happier still - the E34 ones are worth bu**er all.
Cut all the back off the E34 ones and glue them in place with silicon rubber.
-
Daadji
- E30 Zone Newbie

- Posts: 66
- Joined: Fri Nov 03, 2006 11:00 pm
Why dont you just go to bme dealer they are £28.09 brand new thats what you would pay off ebay anyway
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Yes! -I've trimmed one back as an experiment, and it fits in the E30 wheel OK.cheesebox wrote: Just read this Brian - is this a serious suggestion? .
Very slightly smaller diameter than would be ideal, but close enough.
-
Speedtouch
- Old Skooler

- Posts: 14130
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
You can drill a small hole through the nut base and into the metal below (no need to drill the wheel itself!) while it is in the locked position, countersink the hole then screw in a small self-tapping screw as an effective anti-theft deterrent.
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
-
cheesebox
- E30 Zone Regular

- Posts: 261
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: Buxton, Derbyshire
Brilliant idea. I was reluctant to put the replacement centres back on the car in case they got nicked again.320iSE wrote:You can drill a small hole through the nut base and into the metal below (no need to drill the wheel itself!) while it is in the locked position, countersink the hole then screw in a small self-tapping screw as an effective anti-theft deterrent.
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
what do you mean by 'nut base'?320iSE wrote:You can drill a small hole through the nut base and into the metal below (no need to drill the wheel itself!) while it is in the locked position, countersink the hole then screw in a small self-tapping screw as an effective anti-theft deterrent.







