suspension knocking/clunking

Need technical Q/A then you're in the right place

Moderator: martauto

oze30
E30 Zone Addict
E30 Zone Addict
Posts: 4133
Joined: Mon Oct 24, 2005 11:00 pm
Location: Sydney

Post Fri Jan 12, 2007 10:37 am

I have a strange knock that has developed recently. from the drivers side front suspension. Ive eliminated the roll bar ( disconnected it).

Ive semi checked the suspension collar (billie) but dont want to take the strut off again. Have checked it, its nice and tight so I think I can eliminate that.

Ive replaced the whole suspension side of things 2k ago, so its got new top mounts/lollipop bush, strut and different leg( Though it didnt do this till recently)

When you jack the wheel up, and wiggle, nothing moves so I think I can safley eliminate the wheel bearing ( But I'm planning to do them anyway to fix the ABS light)

BUT when you hit the top of the wheel, you get a sound. I havent checked this on the other side.. but Im thinking it wouldnt make the sound. I held the different parts (strut, caliper,tie rod,spring,shock,top mount, wish bone) but it seems to be coming from behind the wheel. I did notice the dust shield was a bit close, but that wouldnt produce a clunking sound though.

Any thoughts?
DRIFTBOY
E30 Zone Addict
E30 Zone Addict
Posts: 3131
Joined: Mon May 22, 2006 11:00 pm
Location: Kent

Post Fri Jan 12, 2007 10:46 am

Are the ball joints in the lower suspension arm ok?
All nuts and bolts fully tightened? - easy to overlook the obvious sometimes! Caliper bolts?
Could it be coming through the steering? - Worn inner track rods, track rod ends, rack or coupling ?
Jeremy Clarkson wrote:...but it drives the front wheels. Theee wrooong wheels!
da4x4turbo wrote:I raced a vivaro on the motorway once in a 318is.... and lost!!!
Martinaston
E30 Zone Addict
E30 Zone Addict
Posts: 3749
Joined: Mon Mar 14, 2005 11:00 pm
Location: London

Post Fri Jan 12, 2007 11:07 am

Jack it up so the wheel is just off the floor and then stick a bar under the tyre and see if you can lever the whole lot up and down, you should be able to spot any play in the top mount.
If not that then maybe a bent shock ? that can give a knock if you give a tug on the top of the wheel (not jacked up)
There is NO nucleus.
oze30
E30 Zone Addict
E30 Zone Addict
Posts: 4133
Joined: Mon Oct 24, 2005 11:00 pm
Location: Sydney

Post Fri Jan 12, 2007 11:10 am

DRIFTBOY wrote:Are the ball joints in the lower suspension arm ok?
All nuts and bolts fully tightened? - easy to overlook the obvious sometimes! Caliper bolts?
Could it be coming through the steering? - Worn inner track rods, track rod ends, rack or coupling ?
tried all that (barring the caliper. butr when i was hitting the wheel, there was no movement in the caliper. Its feels like the bottom of the strut, but the only place it connects is the ball joint... but that's new. and there was no movemnet either.
Chris-W
E30 Zone Team Member
E30 Zone Team Member
Posts: 7219
Joined: Tue May 24, 2005 11:00 pm
Location: South Cheshire

Post Fri Jan 12, 2007 11:25 am

Not something daft like the subframe, is it?
Image
oze30
E30 Zone Addict
E30 Zone Addict
Posts: 4133
Joined: Mon Oct 24, 2005 11:00 pm
Location: Sydney

Post Fri Jan 12, 2007 11:44 am

djunno.. could be now I think about it.. but what would go wrong with that? and HOW????

Martin.. I'll give that a try. Next option is to go to a place with a 2 poster and get them to see if they know what it could be
Martinaston
E30 Zone Addict
E30 Zone Addict
Posts: 3749
Joined: Mon Mar 14, 2005 11:00 pm
Location: London

Post Fri Jan 12, 2007 2:53 pm

Could be a ball joint not seated correctly, they can look like the nut is done up but the pin/bolt is not all the way home.

Engine mount ? 8O Or an odd spanner left laying around :mad:
There is NO nucleus.
SPADGE
Married to the E30 Zone
Married to the E30 Zone
Posts: 7373
Joined: Wed Aug 09, 2006 11:00 pm
Location: Milton Keynes, Bucks

Post Fri Jan 12, 2007 4:06 pm

Col i'm still missing a qaurter inch ratchet so have a good gander under there please :D
Engine conversions, Auto to manual conversions, parts, servicing etc etc... For anything e30 call 07718 901737
User avatar
fugazi33
E30 Zone Newbie
E30 Zone Newbie
Posts: 213
Joined: Sat Sep 09, 2006 11:00 pm
Location: Bucks

Post Fri Jan 12, 2007 5:03 pm

Hi Col, unless somethings not tightened up I'd say balljoint (inner/outer or trackrod end) or inner end of the steering arm......or 1/4" drive ratchet :mad:
oze30
E30 Zone Addict
E30 Zone Addict
Posts: 4133
Joined: Mon Oct 24, 2005 11:00 pm
Location: Sydney

Post Fri Jan 12, 2007 5:49 pm

spadge.. no luck on the ratchet sorry!

Shane, the only non new balljoint is the tie rod end.. but there's no play in there. Might be a stuffed top mount.. but I don't want to have to take it all apart again!!! ARGH!!!!!
User avatar
fugazi33
E30 Zone Newbie
E30 Zone Newbie
Posts: 213
Joined: Sat Sep 09, 2006 11:00 pm
Location: Bucks

Post Fri Jan 12, 2007 6:15 pm

oze30 wrote:spadge.. no luck on the ratchet sorry!

Shane, the only non new balljoint is the tie rod end.. but there's no play in there. Might be a stuffed top mount.. but I don't want to have to take it all apart again!!! ARGH!!!!!
I know what you're saying, I'll tell you about the "fun" I had the other day with One of the struts on mine next time I see you, the swearometer was off the scale!
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Fri Jan 12, 2007 11:29 pm

i know it sounds silly Col, but have you checked the 19mm nut on the top mount from the top of the shock? if you re use knackered old nuts here they can unwind and give a nice knocking noise. Not that i know :o:
User avatar
fugazi33
E30 Zone Newbie
E30 Zone Newbie
Posts: 213
Joined: Sat Sep 09, 2006 11:00 pm
Location: Bucks

Post Fri Jan 12, 2007 11:52 pm

Simon13 wrote:i know it sounds silly Col, but have you checked the 19mm nut on the top mount from the top of the shock? if you re use knackered old nuts here they can unwind and give a nice knocking noise. Not that i know :o:
Good call! Didn't think of that, even though I'd been out in mine knocking like a pro's headboard with them backed off ready for when I ripped the struts off!
oze30
E30 Zone Addict
E30 Zone Addict
Posts: 4133
Joined: Mon Oct 24, 2005 11:00 pm
Location: Sydney

Post Sat Jan 13, 2007 9:22 pm

Simon13 wrote:i know it sounds silly Col, but have you checked the 19mm nut on the top mount from the top of the shock? if you re use knackered old nuts here they can unwind and give a nice knocking noise. Not that i know :o:
Its a new nut.. BUt the top mount is from eurocarparts. Ive tried to tighten it as much as possible.. but it's not spinning the shock.

:x