suspension knocking/clunking
Moderator: martauto
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
I have a strange knock that has developed recently. from the drivers side front suspension. Ive eliminated the roll bar ( disconnected it).
Ive semi checked the suspension collar (billie) but dont want to take the strut off again. Have checked it, its nice and tight so I think I can eliminate that.
Ive replaced the whole suspension side of things 2k ago, so its got new top mounts/lollipop bush, strut and different leg( Though it didnt do this till recently)
When you jack the wheel up, and wiggle, nothing moves so I think I can safley eliminate the wheel bearing ( But I'm planning to do them anyway to fix the ABS light)
BUT when you hit the top of the wheel, you get a sound. I havent checked this on the other side.. but Im thinking it wouldnt make the sound. I held the different parts (strut, caliper,tie rod,spring,shock,top mount, wish bone) but it seems to be coming from behind the wheel. I did notice the dust shield was a bit close, but that wouldnt produce a clunking sound though.
Any thoughts?
Ive semi checked the suspension collar (billie) but dont want to take the strut off again. Have checked it, its nice and tight so I think I can eliminate that.
Ive replaced the whole suspension side of things 2k ago, so its got new top mounts/lollipop bush, strut and different leg( Though it didnt do this till recently)
When you jack the wheel up, and wiggle, nothing moves so I think I can safley eliminate the wheel bearing ( But I'm planning to do them anyway to fix the ABS light)
BUT when you hit the top of the wheel, you get a sound. I havent checked this on the other side.. but Im thinking it wouldnt make the sound. I held the different parts (strut, caliper,tie rod,spring,shock,top mount, wish bone) but it seems to be coming from behind the wheel. I did notice the dust shield was a bit close, but that wouldnt produce a clunking sound though.
Any thoughts?
-
DRIFTBOY
- E30 Zone Addict

- Posts: 3131
- Joined: Mon May 22, 2006 11:00 pm
- Location: Kent
Are the ball joints in the lower suspension arm ok?
All nuts and bolts fully tightened? - easy to overlook the obvious sometimes! Caliper bolts?
Could it be coming through the steering? - Worn inner track rods, track rod ends, rack or coupling ?
All nuts and bolts fully tightened? - easy to overlook the obvious sometimes! Caliper bolts?
Could it be coming through the steering? - Worn inner track rods, track rod ends, rack or coupling ?
Jeremy Clarkson wrote:...but it drives the front wheels. Theee wrooong wheels!
da4x4turbo wrote:I raced a vivaro on the motorway once in a 318is.... and lost!!!
-
Martinaston
- E30 Zone Addict

- Posts: 3749
- Joined: Mon Mar 14, 2005 11:00 pm
- Location: London
Jack it up so the wheel is just off the floor and then stick a bar under the tyre and see if you can lever the whole lot up and down, you should be able to spot any play in the top mount.
If not that then maybe a bent shock ? that can give a knock if you give a tug on the top of the wheel (not jacked up)
If not that then maybe a bent shock ? that can give a knock if you give a tug on the top of the wheel (not jacked up)
There is NO nucleus.
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
tried all that (barring the caliper. butr when i was hitting the wheel, there was no movement in the caliper. Its feels like the bottom of the strut, but the only place it connects is the ball joint... but that's new. and there was no movemnet either.DRIFTBOY wrote:Are the ball joints in the lower suspension arm ok?
All nuts and bolts fully tightened? - easy to overlook the obvious sometimes! Caliper bolts?
Could it be coming through the steering? - Worn inner track rods, track rod ends, rack or coupling ?
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
djunno.. could be now I think about it.. but what would go wrong with that? and HOW????
Martin.. I'll give that a try. Next option is to go to a place with a 2 poster and get them to see if they know what it could be
Martin.. I'll give that a try. Next option is to go to a place with a 2 poster and get them to see if they know what it could be
-
Martinaston
- E30 Zone Addict

- Posts: 3749
- Joined: Mon Mar 14, 2005 11:00 pm
- Location: London
Could be a ball joint not seated correctly, they can look like the nut is done up but the pin/bolt is not all the way home.
Engine mount ?
Or an odd spanner left laying around 
Engine mount ?
There is NO nucleus.
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
Col i'm still missing a qaurter inch ratchet so have a good gander under there please 
Engine conversions, Auto to manual conversions, parts, servicing etc etc... For anything e30 call 07718 901737
-
fugazi33
- E30 Zone Newbie

- Posts: 213
- Joined: Sat Sep 09, 2006 11:00 pm
- Location: Bucks
Hi Col, unless somethings not tightened up I'd say balljoint (inner/outer or trackrod end) or inner end of the steering arm......or 1/4" drive ratchet 
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
spadge.. no luck on the ratchet sorry!
Shane, the only non new balljoint is the tie rod end.. but there's no play in there. Might be a stuffed top mount.. but I don't want to have to take it all apart again!!! ARGH!!!!!
Shane, the only non new balljoint is the tie rod end.. but there's no play in there. Might be a stuffed top mount.. but I don't want to have to take it all apart again!!! ARGH!!!!!
-
fugazi33
- E30 Zone Newbie

- Posts: 213
- Joined: Sat Sep 09, 2006 11:00 pm
- Location: Bucks
I know what you're saying, I'll tell you about the "fun" I had the other day with One of the struts on mine next time I see you, the swearometer was off the scale!oze30 wrote:spadge.. no luck on the ratchet sorry!
Shane, the only non new balljoint is the tie rod end.. but there's no play in there. Might be a stuffed top mount.. but I don't want to have to take it all apart again!!! ARGH!!!!!
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
i know it sounds silly Col, but have you checked the 19mm nut on the top mount from the top of the shock? if you re use knackered old nuts here they can unwind and give a nice knocking noise. Not that i know 
-
fugazi33
- E30 Zone Newbie

- Posts: 213
- Joined: Sat Sep 09, 2006 11:00 pm
- Location: Bucks
Good call! Didn't think of that, even though I'd been out in mine knocking like a pro's headboard with them backed off ready for when I ripped the struts off!Simon13 wrote:i know it sounds silly Col, but have you checked the 19mm nut on the top mount from the top of the shock? if you re use knackered old nuts here they can unwind and give a nice knocking noise. Not that i know
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
Its a new nut.. BUt the top mount is from eurocarparts. Ive tried to tighten it as much as possible.. but it's not spinning the shock.Simon13 wrote:i know it sounds silly Col, but have you checked the 19mm nut on the top mount from the top of the shock? if you re use knackered old nuts here they can unwind and give a nice knocking noise. Not that i know

