Also he said that there was a place in the radiator for the swich to turn the fan on and off? anyone know ware and what i need to make it all work??
the fans all mounted know and i just want to get it all wired in! cheers matt
Moderator: martauto










Brian,ive read this 5 times and cant get my head round itBrianmoooore wrote:Not just one place in the fusebox - there's even a spare!
Use relay K1 and fuse 3, or relay K6 and fuse 18.
You will need an ordinary 4 pin orange relay and a 30A fuse, plus pins (from your dealer), for the outer fuse position and the one missing relay pin.
You also need a connection to the outer pin of fuse 19 to provide power for the thermoswitch to control the relay.
There is a small rubber nipple on the side of the fusebox nearest the wing where you can feed your new loom into the fusebox. Just cut the end off, so that it remains waterproof.


Earth (-) wire from fan goes to the earth stud behind the left headlamp.eko wrote:Brianmoooore wrote:Not just one place in the fusebox - there's even a spare!
Use relay K1 and fuse 3, or relay K6 and fuse 18.
You will need an ordinary 4 pin orange relay and a 30A fuse, plus pins (from your dealer), for the outer fuse position and the one missing relay pin.
You also need a connection to the outer pin of fuse 19 to provide power for the thermo switch to control the relay.
There is a small rubber nipple on the side of the fusebox nearest the wing where you can feed your new loom into the fusebox. Just cut the end off, so that it remains waterproof.




