wireing up an electric fan

Need technical Q/A then you're in the right place

Moderator: martauto

appletree
E30 Zone Addict
E30 Zone Addict
Posts: 3479
Joined: Fri Jan 20, 2006 11:00 pm
Location: Retford

Post Thu Dec 21, 2006 8:09 am

can any one help me with as small problem i have? a while ago i went to look at tim_s s car and saw he had an electric fan in place of the viscous one, he said that there was a place in the fuse box for the relay and wiring for the fan, can anuone tell me which holes in the fuse box and what type of rely i need?

Also he said that there was a place in the radiator for the swich to turn the fan on and off? anyone know ware and what i need to make it all work??

the fans all mounted know and i just want to get it all wired in! cheers matt :D
Image

You should never underestimate the predictability of stupidity

M42 Supercharged 285bhp + M3 6speed box
E30Mark
E30 Zone Team Member
E30 Zone Team Member
Posts: 8107
Joined: Sun Jan 09, 2005 11:00 pm
Location: Wimborne, Dorset

Post Thu Dec 21, 2006 8:20 am

Don't know the wiring info off the top of my head, the radiator though should hopefully have a bung in the side which you remove and fit a screw-in thermostat... whether or not you have this option will depend if you have the original or aftermarket rad :?
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Dec 21, 2006 9:32 am

Not just one place in the fusebox - there's even a spare!
Use relay K1 and fuse 3, or relay K6 and fuse 18.
You will need an ordinary 4 pin orange relay and a 30A fuse, plus pins (from your dealer), for the outer fuse position and the one missing relay pin.
You also need a connection to the outer pin of fuse 19 to provide power for the thermoswitch to control the relay.
There is a small rubber nipple on the side of the fusebox nearest the wing where you can feed your new loom into the fusebox. Just cut the end off, so that it remains waterproof.
appletree
E30 Zone Addict
E30 Zone Addict
Posts: 3479
Joined: Fri Jan 20, 2006 11:00 pm
Location: Retford

Post Thu Dec 21, 2006 10:28 am

stunning thanks for the help lads, al have alook this after noon! :cool:
Image

You should never underestimate the predictability of stupidity

M42 Supercharged 285bhp + M3 6speed box
appletree
E30 Zone Addict
E30 Zone Addict
Posts: 3479
Joined: Fri Jan 20, 2006 11:00 pm
Location: Retford

Post Tue Dec 26, 2006 6:06 pm

never got round to this, just been looking on the ETK to try and find the bits i need and can find any!!! :? can help or tell me where i should look please brianmoooore!! :D
Image

You should never underestimate the predictability of stupidity

M42 Supercharged 285bhp + M3 6speed box
beardymat
E30 Zone Squatter
E30 Zone Squatter
Posts: 1979
Joined: Tue Jun 14, 2005 11:00 pm
Location: sheffield, city of steel, and rust apparently

Post Tue Dec 26, 2006 6:19 pm

the thermo switch in the rad normally runs the air con fan so i expect the relay is for the same so you might need to look under air con for the parts.not sure if it will bring in the fan at the right temp or whether you can get others that will.
No longer self employed but still available for welding duties.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Tue Dec 26, 2006 6:20 pm

Thermoswitch is from any aircon BMW. Screws into the right hand end of the radiator near the top. All radiators either have the mounting boss fitted or a raised circle in the plastic where the boss should be.
Only dealer bits you might need are the terminals for the fusebox. No idea on the part numbers - I can't get my ETK discs to install since I installed Windows XP pro after a hard drive failure, and I'm far too tight to buy new anyway. I extract them from old boxes.
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Fri Jan 12, 2007 12:59 am

Brianmoooore wrote:Not just one place in the fusebox - there's even a spare!
Use relay K1 and fuse 3, or relay K6 and fuse 18.
You will need an ordinary 4 pin orange relay and a 30A fuse, plus pins (from your dealer), for the outer fuse position and the one missing relay pin.
You also need a connection to the outer pin of fuse 19 to provide power for the thermoswitch to control the relay.
There is a small rubber nipple on the side of the fusebox nearest the wing where you can feed your new loom into the fusebox. Just cut the end off, so that it remains waterproof.
Brian,ive read this 5 times and cant get my head round it :hammer:

My fan is currently bodge wired into the top of the fuse box and is switched on everytime the ignition is too stage 2,very loud and annoying not to say dodgy as fook!

Anyway got all the parts here to do it right so am going to have ago tomorrow :)

Currently starting at the fan,i have 1 wire bolted directly to earth and the 2nd wire just going to the fusebox-what do i do with this 2nd wire?
Put it to outer pin of fuse 19?
If thats the case where does the wire for the relay pin come from?

Sorry for being dumb Brian,been on the good stuff!
Image
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Fri Jan 12, 2007 9:02 am

eko wrote:
Brianmoooore wrote:Not just one place in the fusebox - there's even a spare!
Use relay K1 and fuse 3, or relay K6 and fuse 18.
You will need an ordinary 4 pin orange relay and a 30A fuse, plus pins (from your dealer), for the outer fuse position and the one missing relay pin.
You also need a connection to the outer pin of fuse 19 to provide power for the thermo switch to control the relay.
There is a small rubber nipple on the side of the fusebox nearest the wing where you can feed your new loom into the fusebox. Just cut the end off, so that it remains waterproof.
Earth (-) wire from fan goes to the earth stud behind the left headlamp.
+ wire from fan goes to the outer pin of fuse 18.
One pin of thermo switch goes to the outer pin of fuse 19.
Other pin of thermo switch goes to the empty socket of relay K6 (85 or 86, whichever is empty).
The thermo switch is a double one, so there will still be one unused pin, depending on which temp setting you choose.
The fan wires need to be fairly heavy gauge wire; the switch ones can be thin.
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Fri Jan 12, 2007 9:39 am

Thanks Brian,ive done a little diagram now and it all makes sense :D
Image
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Fri Jan 12, 2007 11:33 am

i've got all this to look forward to soon aswell!!!
Image
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Fri Jan 12, 2007 5:17 pm

Here is a good explanation, should be put in the article section IMO :wink:

http://www.e30zone.net/modules.php?name ... fan+wiring

You can get the fuse connectors from individual relay sokets, the connector for the relay is just a normal female spade with a retaining barb
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Sat Jan 13, 2007 6:59 pm

Dan, that link is coming up restricted mate

there is another thread on this topic in this forum...
Image
Dan318-is
Married to the E30 Zone
Married to the E30 Zone
Posts: 8006
Joined: Wed Jul 06, 2005 11:00 pm
Location: Surrey/London

Post Sat Jan 13, 2007 7:31 pm

Ian haynes, what a fucking genius. Dan thats a great link.

Appletree, i doubt your standard i.S. radiater will have a provision for the fan switch; as said it screws into the side of the rad (non expension tank side). I used an e34 525 two way fan switch from BMW (about £16), and an e34 aircon rad, which is the correct width across for our cars (about 440mm) with the switch provision in the side (usually blanked up by a 19mm bolt). Hope this helps.