M50 pistons in M20 for 2.7 conversion?

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
jr79
E30 Zone Newbie
E30 Zone Newbie
Posts: 4
Joined: Fri Feb 10, 2006 11:00 pm

Post Sat Jan 06, 2007 8:17 pm

Hi
I`m building together a M20 325i engine (early model), and are looking for more power. I have purchased a 324td crank. The plan is a high-comp (10-10:5) 2.7 engine with 325 head (885).

As I have read there are several ways to do this. I`m thinking that the best way would be not to shave of the block. After studying a piston catalog I found out that the M50b25 piston together with 130mm conrods from an M20b20 could be just perfect. (Maybe with small modifications on the pistons.)

The M50b25 piston is flat at the top. This will of course affect the volum of the combustion chamber. This I can calculate, but how will a flat piston affect the engine in other ways? Have anyone done this?

Or what other pistons can I use? Late/early eta pistons maybe? (This engines was using the 731 head, so its hard to calculate what the comp will be when fitting a 885 head.)

best
Jon
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Sat Jan 06, 2007 8:21 pm

Valve/piston contact

Better off buying custom pistons really
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
User avatar
jr79
E30 Zone Newbie
E30 Zone Newbie
Posts: 4
Joined: Fri Feb 10, 2006 11:00 pm

Post Sun Jan 07, 2007 7:48 pm

Teah, but those pistons are hard to find. Will the shape of the piston affect the engines drivability? I mean, the m20 engine comes with many different piston shapes.
Templ8e30
E30 Zone Addict
E30 Zone Addict
Posts: 2801
Joined: Mon Jan 10, 2005 11:00 pm
Location: Ashton-under-Lyne, Lancashire

Post Sun Jan 07, 2007 9:03 pm

The valve pockets will be mis-matched surely ? 12v head with 24v pistons ?

Cheers,

Iain T
Image
2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Sun Jan 07, 2007 9:10 pm

jr79 wrote:The M50b25 piston is flat at the top.
Not completley flat, they still have valve pockets like Iain is refering to
User avatar
jr79
E30 Zone Newbie
E30 Zone Newbie
Posts: 4
Joined: Fri Feb 10, 2006 11:00 pm

Post Sun Jan 07, 2007 9:11 pm

There won`t be any valve pockets.. As long as the valves don`t crash with the piston, will it matter?
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Sun Jan 07, 2007 9:19 pm

So your going to machine the tops of the pistons?

Loads of engines run flat pistons so I dont see why it would cause a problem.
Turbo-Brown
Boost Junkie
Posts: 4705
Joined: Tue Feb 15, 2005 11:00 pm
Location: Aldershot, Hants

Post Sun Jan 07, 2007 9:35 pm

Be interesting to know exactly what the features on the M20B25 pistons are for before assuming they can be removed.
325i Twin Turbo (until 10am 01/12/07 :( )

www.air-in.co.uk free M20 exhaust and inlet flange
User avatar
jr79
E30 Zone Newbie
E30 Zone Newbie
Posts: 4
Joined: Fri Feb 10, 2006 11:00 pm

Post Mon Jan 08, 2007 7:33 am

"Be interesting to know exactly what the features on the M20B25 pistons are for before assuming they can be removed."

Yeah, thats exactly what I`m trying to find out.

The M50 pistons will be allmost flat because I have to shave the top a little. The reason why I found the M50 piston interesting is because of the flat top, allmost perfect comp height, and short total height. (With this I can use the original 135mm conrods)