Hi
I`m building together a M20 325i engine (early model), and are looking for more power. I have purchased a 324td crank. The plan is a high-comp (10-10:5) 2.7 engine with 325 head (885).
As I have read there are several ways to do this. I`m thinking that the best way would be not to shave of the block. After studying a piston catalog I found out that the M50b25 piston together with 130mm conrods from an M20b20 could be just perfect. (Maybe with small modifications on the pistons.)
The M50b25 piston is flat at the top. This will of course affect the volum of the combustion chamber. This I can calculate, but how will a flat piston affect the engine in other ways? Have anyone done this?
Or what other pistons can I use? Late/early eta pistons maybe? (This engines was using the 731 head, so its hard to calculate what the comp will be when fitting a 885 head.)
best
Jon
M50 pistons in M20 for 2.7 conversion?
Moderator: martauto
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
Valve/piston contact
Better off buying custom pistons really
Better off buying custom pistons really
-
jr79
- E30 Zone Newbie

- Posts: 4
- Joined: Fri Feb 10, 2006 11:00 pm
Teah, but those pistons are hard to find. Will the shape of the piston affect the engines drivability? I mean, the m20 engine comes with many different piston shapes.
-
Templ8e30
- E30 Zone Addict

- Posts: 2801
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Ashton-under-Lyne, Lancashire
The valve pockets will be mis-matched surely ? 12v head with 24v pistons ?
Cheers,
Iain T
Cheers,
Iain T

2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Not completley flat, they still have valve pockets like Iain is refering tojr79 wrote:The M50b25 piston is flat at the top.
-
jr79
- E30 Zone Newbie

- Posts: 4
- Joined: Fri Feb 10, 2006 11:00 pm
There won`t be any valve pockets.. As long as the valves don`t crash with the piston, will it matter?
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
So your going to machine the tops of the pistons?
Loads of engines run flat pistons so I dont see why it would cause a problem.
Loads of engines run flat pistons so I dont see why it would cause a problem.
-
Turbo-Brown
- Boost Junkie
- Posts: 4705
- Joined: Tue Feb 15, 2005 11:00 pm
- Location: Aldershot, Hants
Be interesting to know exactly what the features on the M20B25 pistons are for before assuming they can be removed.
-
jr79
- E30 Zone Newbie

- Posts: 4
- Joined: Fri Feb 10, 2006 11:00 pm
"Be interesting to know exactly what the features on the M20B25 pistons are for before assuming they can be removed."
Yeah, thats exactly what I`m trying to find out.
The M50 pistons will be allmost flat because I have to shave the top a little. The reason why I found the M50 piston interesting is because of the flat top, allmost perfect comp height, and short total height. (With this I can use the original 135mm conrods)
Yeah, thats exactly what I`m trying to find out.
The M50 pistons will be allmost flat because I have to shave the top a little. The reason why I found the M50 piston interesting is because of the flat top, allmost perfect comp height, and short total height. (With this I can use the original 135mm conrods)

