Bad water leak M42 Lump, Continued, Pic's

Need technical Q/A then you're in the right place

Moderator: martauto

cliffybabe
Powered by Nelly
Powered by Nelly
Posts: 10020
Joined: Sun Dec 18, 2005 11:00 pm
Location: Croydon

Post Thu Dec 28, 2006 10:33 pm

Guys

I have just fitted a new water pump on Duffs's motor and there was still a massive leak.

After further inspection it appears there is wate pissing out from the side of the lump like a gasket or seal has gone.

I thought mayebe the head gasket had gone but there is no moisture in the oil

the leak is coming from under the timing chain tension area.

Can anyone help

Thanks
Neil
Last edited by cliffybabe on Wed Jan 03, 2007 12:17 am, edited 2 times in total.
Image
Considering Selling the Cabby, looks like its gonna go
Pal318is
E30 Zone Addict
E30 Zone Addict
Posts: 3494
Joined: Fri Jan 14, 2005 11:00 pm
Location: Kop End - Bedford

Post Thu Dec 28, 2006 10:36 pm

Water Pump...

Pal
Pal

Image[img]http://Image
M42's Run in the Family...The kids sayin 'YNWA'
cliffybabe
Powered by Nelly
Powered by Nelly
Posts: 10020
Joined: Sun Dec 18, 2005 11:00 pm
Location: Croydon

Post Thu Dec 28, 2006 10:39 pm

done the water pump an dstill the leak, it looks like it could be from the timing case, has anyone got any info on which way the water run in the engine??
Image
Considering Selling the Cabby, looks like its gonna go
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Dec 28, 2006 10:43 pm

Do a google search for "profile gasket". Thought all these had been changed years ago!
cliffybabe
Powered by Nelly
Powered by Nelly
Posts: 10020
Joined: Sun Dec 18, 2005 11:00 pm
Location: Croydon

Post Thu Dec 28, 2006 10:45 pm

Brianmoore that sound slike it to me cheers mate
Image
Considering Selling the Cabby, looks like its gonna go
Templ8e30
E30 Zone Addict
E30 Zone Addict
Posts: 2801
Joined: Mon Jan 10, 2005 11:00 pm
Location: Ashton-under-Lyne, Lancashire

Post Thu Dec 28, 2006 10:54 pm

Definately the profile gasket, I had to do this on my wifes E36 318iS a couple of months back.

It's a head off job, real pain on the E dirty sick.

Cheers,

Iain T
Image
2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
cliffybabe
Powered by Nelly
Powered by Nelly
Posts: 10020
Joined: Sun Dec 18, 2005 11:00 pm
Location: Croydon

Post Thu Dec 28, 2006 11:06 pm

Cheers Ian.

Any idea's on what it is gonna cost to fix it??

Any one want a private job??
Image
Considering Selling the Cabby, looks like its gonna go
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Thu Dec 28, 2006 11:16 pm

ahhh the profile gasket issue rears it's ugly head. I'm sure stuart gallafant will be up for it.

318iS profile gasket is not for DIY'ers who are not sure what their doing!
cliffybabe
Powered by Nelly
Powered by Nelly
Posts: 10020
Joined: Sun Dec 18, 2005 11:00 pm
Location: Croydon

Post Thu Dec 28, 2006 11:24 pm

Simon13 wrote: 318iS profile gasket is not for DIY'ers who are not sure what their doing!
yeah thats what i thought (im still proud of myself fitting the water pump :lol: )

I think chris is trying to get her backl ont he road asap and gallafant is away until next weke and booked up for a while :cry:
Image
Considering Selling the Cabby, looks like its gonna go
pacerpete
E30 Zone Team Member
E30 Zone Team Member
Posts: 18165
Joined: Sun Jan 23, 2005 11:00 pm
Location: Iver heath. South bucks.

Post Fri Dec 29, 2006 10:09 am

Yes , very sad job, and possibility of more issues when head removed .... :eek:
Never mind the profile gasket , savour the on limit handling balance, cough..... :)
Last edited by pacerpete on Fri Dec 29, 2006 11:40 am, edited 1 time in total.
dark_sounds
E30 Zone Addict
E30 Zone Addict
Posts: 2458
Joined: Thu Dec 01, 2005 11:00 pm

Post Fri Dec 29, 2006 11:22 am

pacerpete wrote:Yes , very sad job, and possibility of more issues when head removed .... :eek:
Never mind the profile gaket , savour the on limit handling balance, cough..... :)
lol... sly wit, love it.

i thought most of these profile gaskets were done,

hope nothing up crops up

well done neal with thw water pump!
Directed CompX's 12"... 2off. 1000 watts RMS, dual 2ohm VC. 90£ each!!
8600 Luna Phone 480 POSTED BNIB
Dan318-is
Married to the E30 Zone
Married to the E30 Zone
Posts: 8006
Joined: Wed Jul 06, 2005 11:00 pm
Location: Surrey/London

Post Fri Dec 29, 2006 11:39 am

Neil, before you go jumping in to things is there actually any water in the oil?

and how tight did you do the water pump bolts up? IF you over torque them then bad things will happen!

and if you took the thermostat housing off, which i think you should have had to, you are only meant to torque them to 9n/m also and change the thermo gasket. If there is no oil in the water and no water in the oil then i wouldnt jump to conclusions.
cliffybabe
Powered by Nelly
Powered by Nelly
Posts: 10020
Joined: Sun Dec 18, 2005 11:00 pm
Location: Croydon

Post Fri Dec 29, 2006 11:43 am

Cheers Dan

No oil in the water just loads of water pissing out the side of the lump, its not coming form the the theor meither.

I have found this thread

http://www.e30zone.co.uk/modules.php?na ... ic&t=31606

which detaisl the breakdown of the lump and it seems about right for where the water is coming from

Ali, I was proud of myself :mad:
Image
Considering Selling the Cabby, looks like its gonna go
Dan318-is
Married to the E30 Zone
Married to the E30 Zone
Posts: 8006
Joined: Wed Jul 06, 2005 11:00 pm
Location: Surrey/London

Post Fri Dec 29, 2006 11:48 am

Well it probably is the profile gasket but iv never heard of water pissing out the side of it like that! It usually causes water and oil to mix i thought. Just change the head gasket and profile gasket, take the head of and have a look.
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Fri Dec 29, 2006 11:55 am

Back in the day, when i had a 318iS i had issues with mine (surprise there then) and before the head went back on. My dad attatched the front timing cover to the head when he skimmed it. To be sure they were both flat. It helped but the f**king thing still went bang again later on (head cracked). Pacerpete ended up fixing it for the new owner. Hydrolic lock was a phrase used!

I love 318iS's they are brilliant mine went through 3 cylinder heads in 3 years
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Fri Dec 29, 2006 11:56 am

Sounds exactly the same as how mine went, chnaged the water pump which did nothing! The engine is now out of the car and you can see where the water was leaking out where the timing case joins the head, i'll get round to posting a pick up to give you some idea if anyone is interested.
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
Dan318-is
Married to the E30 Zone
Married to the E30 Zone
Posts: 8006
Joined: Wed Jul 06, 2005 11:00 pm
Location: Surrey/London

Post Fri Dec 29, 2006 12:00 pm

Kedge wrote:Sounds exactly the same as how mine went, chnaged the water pump which did nothing! The engine is now out of the car and you can see where the water was leaking out where the timing case joins the head, i'll get round to posting a pick up to give you some idea if anyone is interested.
Long time kedge hows your project going? Pics would be good!
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Fri Dec 29, 2006 6:25 pm

I'll get the picks sorted of my old engine tomorrow!

Got the temporary engine in which now seems to be having a problem getting the oil around, maybe a blockage or oil pump problem!? As for starting a project not had the time nor monay nad still decided what to do, rebuild and tune the M42 or try something else!
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Sat Dec 30, 2006 3:40 pm

The blue/white is crystalised coolant from where the ater was leaking from.
Image
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
Dan318-is
Married to the E30 Zone
Married to the E30 Zone
Posts: 8006
Joined: Wed Jul 06, 2005 11:00 pm
Location: Surrey/London

Post Sat Dec 30, 2006 4:49 pm

IS this on the engine that is currently in the car?
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Sat Dec 30, 2006 4:50 pm

No mate the on i have taken out.
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
cliffybabe
Powered by Nelly
Powered by Nelly
Posts: 10020
Joined: Sun Dec 18, 2005 11:00 pm
Location: Croydon

Post Sat Dec 30, 2006 4:55 pm

Yep thats where the water is coming from, cheers Kedge
Image
Considering Selling the Cabby, looks like its gonna go
cliffybabe
Powered by Nelly
Powered by Nelly
Posts: 10020
Joined: Sun Dec 18, 2005 11:00 pm
Location: Croydon

Post Tue Jan 02, 2007 1:16 pm

I've got some really good pic's now of where the gasket had gone, The gasket feel to bits when it was taken off.
It looked like straw that had been pissed on and chewed by rats.

The only problem is that water has left bad pitting on the head and on the grooving for the gasket, It should be alright as the gasket is quite thick, has anyone else had this? and found it to be alright once the new gasket is in??

Ill get some pic;s up tonight.

Thanks
Neil
Image
Considering Selling the Cabby, looks like its gonna go
Demlotcrew
E30 Zone Team Member
E30 Zone Team Member
Posts: 13329
Joined: Mon Dec 20, 2004 11:00 pm
Location: East Anglia

Post Tue Jan 02, 2007 2:12 pm

cliffybabe wrote:The only problem is that water has left bad pitting on the head and on the grooving for the gasket, It should be alright as the gasket is quite thick, has anyone else had this? and found it to be alright once the new gasket is in??

Ill get some pic;s up tonight.

Thanks
Neil
+
pacerpete wrote:Yes , very sad job, and possibility of more issues when head removed .... :eek:
= Problem

Andrew
cliffybabe
Powered by Nelly
Powered by Nelly
Posts: 10020
Joined: Sun Dec 18, 2005 11:00 pm
Location: Croydon

Post Tue Jan 02, 2007 2:40 pm

Tell me about it mate :cry: , it should be alright just curious to see what other people have done
Image
Considering Selling the Cabby, looks like its gonna go
cliffybabe
Powered by Nelly
Powered by Nelly
Posts: 10020
Joined: Sun Dec 18, 2005 11:00 pm
Location: Croydon

Post Wed Jan 03, 2007 12:18 am

Guys pic's as promised

Head off

Image

Gasket on lump
Image

Image

Whats left of the gasket
Image
Image
Considering Selling the Cabby, looks like its gonna go
Dan318-is
Married to the E30 Zone
Married to the E30 Zone
Posts: 8006
Joined: Wed Jul 06, 2005 11:00 pm
Location: Surrey/London

Post Wed Jan 03, 2007 5:03 pm

CLiffy you need to clean that recess up real good dude! And check the head for corrosion too where it meets the gasket.

How bad was the pitting? pics?
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Fri Jan 05, 2007 12:05 pm

neil, i spoke to chris earlier, but i forgot to tell him... Sutton Rebore do a head warp and crack test for £40, which is worth it all day long. even getting skimmed will be worth it

im so glad i was on holiday when this happened!!
Image
markyboy
E30 Zone Newbie
E30 Zone Newbie
Posts: 128
Joined: Tue Sep 19, 2006 11:00 pm
Location: banstead

Post Fri Jan 05, 2007 12:18 pm

sutton rebore are really good have had them do bits for me , will recomend em, good honest service
ImageImage
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Fri Jan 05, 2007 12:34 pm

i get a nice discount too, when mentioning the company name!!! on some things anyway
Image
markyboy
E30 Zone Newbie
E30 Zone Newbie
Posts: 128
Joined: Tue Sep 19, 2006 11:00 pm
Location: banstead

Post Fri Jan 05, 2007 1:12 pm

stuartgallafant wrote:i get a nice discount too, when mentioning the company name!!! on some things anyway
thats handy to know :D
ImageImage
Dan318-is
Married to the E30 Zone
Married to the E30 Zone
Posts: 8006
Joined: Wed Jul 06, 2005 11:00 pm
Location: Surrey/London

Post Fri Jan 05, 2007 4:53 pm

That gasket is fubared! My wasnt pretty but that thing is finished!
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Fri Jan 05, 2007 9:20 pm

markyboy wrote:
stuartgallafant wrote:i get a nice discount too, when mentioning the company name!!! on some things anyway
thats handy to know :D
yup! its only silly things, and its not even really that much, but if you send LOADS of stuff that way, it does help
Image
User avatar
Royalratch
E30 Zone Addict
E30 Zone Addict
Posts: 4921
Joined: Sat Oct 21, 2006 11:00 pm
Location: London

Post Sat Jan 06, 2007 11:27 am

My iS has been trouble free for 7 years with lot's of mileage and hard use.

Only one owner before me and he had it dealt with at BMW everytime. Since, I have had a mixture of BMW/Specialist servicing.

(stopped going to BMW when they tried to charge me £500 to change the timing 'belt').

Anyway, Just the other day I checked the oil cap and saw the tiniest little white dot of 'mayo' - size of a shotgun pellet.

Does this mean I'm in for trouble and get it looked at ASAP? Thought regular inspections are to prevent this kind of thing...

I know these gaskets were recalled but I can't find the work in any of the history - would BMW be able to tell me if has been done via my VIN?

For the less clued up (like me).
http://www.esatclear.ie/~bpurcell/318is ... filegasket
Dan318-is
Married to the E30 Zone
Married to the E30 Zone
Posts: 8006
Joined: Wed Jul 06, 2005 11:00 pm
Location: Surrey/London

Post Sat Jan 06, 2007 11:32 am

BMW mite be able to tell you but it doesnt mean a thing; mine was repalced by a BMW dealer in maidstone and when i took it apart last weekend it seemed like they had done a shocking job. The recess that the actual gasket sits in hadn't been cleaned out; the whole thing seemed like an quick bodge; hardly any gasket faces had been cleaned up etc.

Royalratch, i would keep an eye on your oil cap and check you dipstick also; just because there is mayo it doesnt mean its your profile gasket; either way the head has to come off though so both shall be replaced. If your unlucky enough it may even be a crackd head but just keep an eye on it for now; Drive a few miles or something and see if you get more mayo and check the dipstick too; and the breather hoses around the throttle body area and the throttle body itself; i had hardly any mayo on my cap or dipstick but my breather hoses were clogged with it.

While the engines apart its probably worth replacing the guide rail, tensioner etc; you can go as far as you want e.g. water pump etc but its all cost i guess.

Keep us updated mate HTH