Bad water leak M42 Lump, Continued, Pic's
Moderator: martauto
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
Guys
I have just fitted a new water pump on Duffs's motor and there was still a massive leak.
After further inspection it appears there is wate pissing out from the side of the lump like a gasket or seal has gone.
I thought mayebe the head gasket had gone but there is no moisture in the oil
the leak is coming from under the timing chain tension area.
Can anyone help
Thanks
Neil
I have just fitted a new water pump on Duffs's motor and there was still a massive leak.
After further inspection it appears there is wate pissing out from the side of the lump like a gasket or seal has gone.
I thought mayebe the head gasket had gone but there is no moisture in the oil
the leak is coming from under the timing chain tension area.
Can anyone help
Thanks
Neil
Last edited by cliffybabe on Wed Jan 03, 2007 12:17 am, edited 2 times in total.

Considering Selling the Cabby, looks like its gonna go
-
Pal318is
- E30 Zone Addict

- Posts: 3494
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Kop End - Bedford
Water Pump...
Pal
Pal
Pal
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
done the water pump an dstill the leak, it looks like it could be from the timing case, has anyone got any info on which way the water run in the engine??

Considering Selling the Cabby, looks like its gonna go
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Do a google search for "profile gasket". Thought all these had been changed years ago!
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
Brianmoore that sound slike it to me cheers mate

Considering Selling the Cabby, looks like its gonna go
-
Templ8e30
- E30 Zone Addict

- Posts: 2801
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Ashton-under-Lyne, Lancashire
Definately the profile gasket, I had to do this on my wifes E36 318iS a couple of months back.
It's a head off job, real pain on the E dirty sick.
Cheers,
Iain T
It's a head off job, real pain on the E dirty sick.
Cheers,
Iain T

2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
Cheers Ian.
Any idea's on what it is gonna cost to fix it??
Any one want a private job??
Any idea's on what it is gonna cost to fix it??
Any one want a private job??

Considering Selling the Cabby, looks like its gonna go
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
ahhh the profile gasket issue rears it's ugly head. I'm sure stuart gallafant will be up for it.
318iS profile gasket is not for DIY'ers who are not sure what their doing!
318iS profile gasket is not for DIY'ers who are not sure what their doing!
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
yeah thats what i thought (im still proud of myself fitting the water pumpSimon13 wrote: 318iS profile gasket is not for DIY'ers who are not sure what their doing!
I think chris is trying to get her backl ont he road asap and gallafant is away until next weke and booked up for a while

Considering Selling the Cabby, looks like its gonna go
-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
Yes , very sad job, and possibility of more issues when head removed ....
Never mind the profile gasket , savour the on limit handling balance, cough.....
Never mind the profile gasket , savour the on limit handling balance, cough.....
Last edited by pacerpete on Fri Dec 29, 2006 11:40 am, edited 1 time in total.
-
dark_sounds
- E30 Zone Addict

- Posts: 2458
- Joined: Thu Dec 01, 2005 11:00 pm
lol... sly wit, love it.pacerpete wrote:Yes , very sad job, and possibility of more issues when head removed ....![]()
Never mind the profile gaket , savour the on limit handling balance, cough.....
i thought most of these profile gaskets were done,
hope nothing up crops up
well done neal with thw water pump!
Directed CompX's 12"... 2off. 1000 watts RMS, dual 2ohm VC. 90£ each!!
8600 Luna Phone 480 POSTED BNIB
8600 Luna Phone 480 POSTED BNIB
-
Dan318-is
- Married to the E30 Zone

- Posts: 8006
- Joined: Wed Jul 06, 2005 11:00 pm
- Location: Surrey/London
Neil, before you go jumping in to things is there actually any water in the oil?
and how tight did you do the water pump bolts up? IF you over torque them then bad things will happen!
and if you took the thermostat housing off, which i think you should have had to, you are only meant to torque them to 9n/m also and change the thermo gasket. If there is no oil in the water and no water in the oil then i wouldnt jump to conclusions.
and how tight did you do the water pump bolts up? IF you over torque them then bad things will happen!
and if you took the thermostat housing off, which i think you should have had to, you are only meant to torque them to 9n/m also and change the thermo gasket. If there is no oil in the water and no water in the oil then i wouldnt jump to conclusions.
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
Cheers Dan
No oil in the water just loads of water pissing out the side of the lump, its not coming form the the theor meither.
I have found this thread
http://www.e30zone.co.uk/modules.php?na ... ic&t=31606
which detaisl the breakdown of the lump and it seems about right for where the water is coming from
Ali, I was proud of myself
No oil in the water just loads of water pissing out the side of the lump, its not coming form the the theor meither.
I have found this thread
http://www.e30zone.co.uk/modules.php?na ... ic&t=31606
which detaisl the breakdown of the lump and it seems about right for where the water is coming from
Ali, I was proud of myself

Considering Selling the Cabby, looks like its gonna go
-
Dan318-is
- Married to the E30 Zone

- Posts: 8006
- Joined: Wed Jul 06, 2005 11:00 pm
- Location: Surrey/London
Well it probably is the profile gasket but iv never heard of water pissing out the side of it like that! It usually causes water and oil to mix i thought. Just change the head gasket and profile gasket, take the head of and have a look.
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
Back in the day, when i had a 318iS i had issues with mine (surprise there then) and before the head went back on. My dad attatched the front timing cover to the head when he skimmed it. To be sure they were both flat. It helped but the f**king thing still went bang again later on (head cracked). Pacerpete ended up fixing it for the new owner. Hydrolic lock was a phrase used!
I love 318iS's they are brilliant mine went through 3 cylinder heads in 3 years
I love 318iS's they are brilliant mine went through 3 cylinder heads in 3 years
-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
Sounds exactly the same as how mine went, chnaged the water pump which did nothing! The engine is now out of the car and you can see where the water was leaking out where the timing case joins the head, i'll get round to posting a pick up to give you some idea if anyone is interested.
-
Dan318-is
- Married to the E30 Zone

- Posts: 8006
- Joined: Wed Jul 06, 2005 11:00 pm
- Location: Surrey/London
Long time kedge hows your project going? Pics would be good!Kedge wrote:Sounds exactly the same as how mine went, chnaged the water pump which did nothing! The engine is now out of the car and you can see where the water was leaking out where the timing case joins the head, i'll get round to posting a pick up to give you some idea if anyone is interested.
-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
I'll get the picks sorted of my old engine tomorrow!
Got the temporary engine in which now seems to be having a problem getting the oil around, maybe a blockage or oil pump problem!? As for starting a project not had the time nor monay nad still decided what to do, rebuild and tune the M42 or try something else!
Got the temporary engine in which now seems to be having a problem getting the oil around, maybe a blockage or oil pump problem!? As for starting a project not had the time nor monay nad still decided what to do, rebuild and tune the M42 or try something else!
-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
-
Dan318-is
- Married to the E30 Zone

- Posts: 8006
- Joined: Wed Jul 06, 2005 11:00 pm
- Location: Surrey/London
IS this on the engine that is currently in the car?
-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
No mate the on i have taken out.
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
Yep thats where the water is coming from, cheers Kedge

Considering Selling the Cabby, looks like its gonna go
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
I've got some really good pic's now of where the gasket had gone, The gasket feel to bits when it was taken off.
It looked like straw that had been pissed on and chewed by rats.
The only problem is that water has left bad pitting on the head and on the grooving for the gasket, It should be alright as the gasket is quite thick, has anyone else had this? and found it to be alright once the new gasket is in??
Ill get some pic;s up tonight.
Thanks
Neil
It looked like straw that had been pissed on and chewed by rats.
The only problem is that water has left bad pitting on the head and on the grooving for the gasket, It should be alright as the gasket is quite thick, has anyone else had this? and found it to be alright once the new gasket is in??
Ill get some pic;s up tonight.
Thanks
Neil

Considering Selling the Cabby, looks like its gonna go
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
+cliffybabe wrote:The only problem is that water has left bad pitting on the head and on the grooving for the gasket, It should be alright as the gasket is quite thick, has anyone else had this? and found it to be alright once the new gasket is in??
Ill get some pic;s up tonight.
Thanks
Neil
= Problempacerpete wrote:Yes , very sad job, and possibility of more issues when head removed ....
Andrew
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
Tell me about it mate
, it should be alright just curious to see what other people have done

Considering Selling the Cabby, looks like its gonna go
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
Guys pic's as promised
Head off

Gasket on lump


Whats left of the gasket

Head off

Gasket on lump


Whats left of the gasket


Considering Selling the Cabby, looks like its gonna go
-
Dan318-is
- Married to the E30 Zone

- Posts: 8006
- Joined: Wed Jul 06, 2005 11:00 pm
- Location: Surrey/London
CLiffy you need to clean that recess up real good dude! And check the head for corrosion too where it meets the gasket.
How bad was the pitting? pics?
How bad was the pitting? pics?
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
markyboy
- E30 Zone Newbie

- Posts: 128
- Joined: Tue Sep 19, 2006 11:00 pm
- Location: banstead
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
markyboy
- E30 Zone Newbie

- Posts: 128
- Joined: Tue Sep 19, 2006 11:00 pm
- Location: banstead
-
Dan318-is
- Married to the E30 Zone

- Posts: 8006
- Joined: Wed Jul 06, 2005 11:00 pm
- Location: Surrey/London
That gasket is fubared! My wasnt pretty but that thing is finished!
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
My iS has been trouble free for 7 years with lot's of mileage and hard use.
Only one owner before me and he had it dealt with at BMW everytime. Since, I have had a mixture of BMW/Specialist servicing.
(stopped going to BMW when they tried to charge me £500 to change the timing 'belt').
Anyway, Just the other day I checked the oil cap and saw the tiniest little white dot of 'mayo' - size of a shotgun pellet.
Does this mean I'm in for trouble and get it looked at ASAP? Thought regular inspections are to prevent this kind of thing...
I know these gaskets were recalled but I can't find the work in any of the history - would BMW be able to tell me if has been done via my VIN?
For the less clued up (like me).
http://www.esatclear.ie/~bpurcell/318is ... filegasket
Only one owner before me and he had it dealt with at BMW everytime. Since, I have had a mixture of BMW/Specialist servicing.
(stopped going to BMW when they tried to charge me £500 to change the timing 'belt').
Anyway, Just the other day I checked the oil cap and saw the tiniest little white dot of 'mayo' - size of a shotgun pellet.
Does this mean I'm in for trouble and get it looked at ASAP? Thought regular inspections are to prevent this kind of thing...
I know these gaskets were recalled but I can't find the work in any of the history - would BMW be able to tell me if has been done via my VIN?
For the less clued up (like me).
http://www.esatclear.ie/~bpurcell/318is ... filegasket
-
Dan318-is
- Married to the E30 Zone

- Posts: 8006
- Joined: Wed Jul 06, 2005 11:00 pm
- Location: Surrey/London
BMW mite be able to tell you but it doesnt mean a thing; mine was repalced by a BMW dealer in maidstone and when i took it apart last weekend it seemed like they had done a shocking job. The recess that the actual gasket sits in hadn't been cleaned out; the whole thing seemed like an quick bodge; hardly any gasket faces had been cleaned up etc.
Royalratch, i would keep an eye on your oil cap and check you dipstick also; just because there is mayo it doesnt mean its your profile gasket; either way the head has to come off though so both shall be replaced. If your unlucky enough it may even be a crackd head but just keep an eye on it for now; Drive a few miles or something and see if you get more mayo and check the dipstick too; and the breather hoses around the throttle body area and the throttle body itself; i had hardly any mayo on my cap or dipstick but my breather hoses were clogged with it.
While the engines apart its probably worth replacing the guide rail, tensioner etc; you can go as far as you want e.g. water pump etc but its all cost i guess.
Keep us updated mate HTH
Royalratch, i would keep an eye on your oil cap and check you dipstick also; just because there is mayo it doesnt mean its your profile gasket; either way the head has to come off though so both shall be replaced. If your unlucky enough it may even be a crackd head but just keep an eye on it for now; Drive a few miles or something and see if you get more mayo and check the dipstick too; and the breather hoses around the throttle body area and the throttle body itself; i had hardly any mayo on my cap or dipstick but my breather hoses were clogged with it.
While the engines apart its probably worth replacing the guide rail, tensioner etc; you can go as far as you want e.g. water pump etc but its all cost i guess.
Keep us updated mate HTH






