Rear Spring Change

Need technical Q/A then you're in the right place

Moderator: martauto

cliffybabe
Powered by Nelly
Powered by Nelly
Posts: 10020
Joined: Sun Dec 18, 2005 11:00 pm
Location: Croydon

Post Sat Dec 30, 2006 1:57 am

Hi guys

Gonna fit my rear springs tomorrow, Is it just a case of poping the 19mm bolt out, then leaver the arm down and then ripping the spring out???

Thanks
Neil
Image
Considering Selling the Cabby, looks like its gonna go
Martinaston
E30 Zone Addict
E30 Zone Addict
Posts: 3749
Joined: Mon Mar 14, 2005 11:00 pm
Location: London

Post Sat Dec 30, 2006 2:33 am

you can do it like that but i've read it can damage the cv joints if bent past a certain angle, yet to come across it though.
I take you got some front struts then ? (i've still got mine :( )
There is NO nucleus.
cliffybabe
Powered by Nelly
Powered by Nelly
Posts: 10020
Joined: Sun Dec 18, 2005 11:00 pm
Location: Croydon

Post Sat Dec 30, 2006 2:38 am

Martinaston wrote: I take you got some front struts then ? (i've still got mine :( )
Na mate still working on it, trying to find out if mtec ones will be ok for the cab etc with width sixes etc, Was going to have a set of Adjustables but im not sure whats happened tot he guy i was gonna get them off as he hasnt been in touch since wed's, ill PM ya
Image
Considering Selling the Cabby, looks like its gonna go
DRIFTBOY
E30 Zone Addict
E30 Zone Addict
Posts: 3131
Joined: Mon May 22, 2006 11:00 pm
Location: Kent

Post Sat Dec 30, 2006 3:04 am

cliffybabe wrote:Hi guys

Gonna fit my rear springs tomorrow, Is it just a case of poping the 19mm bolt out, then leaver the arm down and then ripping the spring out???
It helps too if you disconnect the anti roll bar drop links. Easiest way to do that is to undo the nut that holds the link bracket to the trailing arm.

I've heard you can damage cv joints but I've never had any trouble and I've had my springs out several times!
Jeremy Clarkson wrote:...but it drives the front wheels. Theee wrooong wheels!
da4x4turbo wrote:I raced a vivaro on the motorway once in a 318is.... and lost!!!
wildeian
E30 Zone Regular
E30 Zone Regular
Posts: 851
Joined: Thu Mar 09, 2006 11:00 pm
Location: Colchester, Essex

Post Sat Dec 30, 2006 7:34 pm

You can take the diff mounting bolt out at the top, which reduces the angle on the drive shafts.

I didn't need to touch the ARB on my sport, but I've heard otherwise on non-sports.

If you don't have spring compressors, a couple of jubiliee clips around each spring before jacking makes them easier to get out. :D
carpmart
E30 Zone Newbie
E30 Zone Newbie
Posts: 97
Joined: Thu Sep 21, 2006 11:00 pm
Location: Bedfordshire J12 M1

Post Sat Dec 30, 2006 8:32 pm

wildeian wrote:If you don't have spring compressors, a couple of jubiliee clips around each spring before jacking makes them easier to get out. :D
Don't do this! Always use proper spring compressors!
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Dec 30, 2006 8:44 pm

carpmart wrote:
wildeian wrote:If you don't have spring compressors, a couple of jubiliee clips around each spring before jacking makes them easier to get out. :D
Don't do this! Always use proper spring compressors!
They only need to be compressed the slightest amount if at all to get them out. Should be no problem getting lowered ones in.
handpaper
E30 Zone Regular
E30 Zone Regular
Posts: 883
Joined: Sun Apr 16, 2006 11:00 pm
Location: Newport, South Wales

Post Sat Dec 30, 2006 8:47 pm

Remove the shock bolt and the six allen bolts that hold the driveshaft to the diff and the arm drops down far enough for you to pull the spring out easily by hand. Levering the arm down tries to stretch the driveshaft - not good for the CV joints.