Hi guys
Gonna fit my rear springs tomorrow, Is it just a case of poping the 19mm bolt out, then leaver the arm down and then ripping the spring out???
Thanks
Neil
Rear Spring Change
Moderator: martauto
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon

Considering Selling the Cabby, looks like its gonna go
-
Martinaston
- E30 Zone Addict

- Posts: 3749
- Joined: Mon Mar 14, 2005 11:00 pm
- Location: London
you can do it like that but i've read it can damage the cv joints if bent past a certain angle, yet to come across it though.
I take you got some front struts then ? (i've still got mine
)
I take you got some front struts then ? (i've still got mine
There is NO nucleus.
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
Na mate still working on it, trying to find out if mtec ones will be ok for the cab etc with width sixes etc, Was going to have a set of Adjustables but im not sure whats happened tot he guy i was gonna get them off as he hasnt been in touch since wed's, ill PM yaMartinaston wrote: I take you got some front struts then ? (i've still got mine)

Considering Selling the Cabby, looks like its gonna go
-
DRIFTBOY
- E30 Zone Addict

- Posts: 3131
- Joined: Mon May 22, 2006 11:00 pm
- Location: Kent
It helps too if you disconnect the anti roll bar drop links. Easiest way to do that is to undo the nut that holds the link bracket to the trailing arm.cliffybabe wrote:Hi guys
Gonna fit my rear springs tomorrow, Is it just a case of poping the 19mm bolt out, then leaver the arm down and then ripping the spring out???
I've heard you can damage cv joints but I've never had any trouble and I've had my springs out several times!
Jeremy Clarkson wrote:...but it drives the front wheels. Theee wrooong wheels!
da4x4turbo wrote:I raced a vivaro on the motorway once in a 318is.... and lost!!!
-
wildeian
- E30 Zone Regular

- Posts: 851
- Joined: Thu Mar 09, 2006 11:00 pm
- Location: Colchester, Essex
You can take the diff mounting bolt out at the top, which reduces the angle on the drive shafts.
I didn't need to touch the ARB on my sport, but I've heard otherwise on non-sports.
If you don't have spring compressors, a couple of jubiliee clips around each spring before jacking makes them easier to get out.
I didn't need to touch the ARB on my sport, but I've heard otherwise on non-sports.
If you don't have spring compressors, a couple of jubiliee clips around each spring before jacking makes them easier to get out.
-
carpmart
- E30 Zone Newbie

- Posts: 97
- Joined: Thu Sep 21, 2006 11:00 pm
- Location: Bedfordshire J12 M1
Don't do this! Always use proper spring compressors!wildeian wrote:If you don't have spring compressors, a couple of jubiliee clips around each spring before jacking makes them easier to get out.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
They only need to be compressed the slightest amount if at all to get them out. Should be no problem getting lowered ones in.carpmart wrote:Don't do this! Always use proper spring compressors!wildeian wrote:If you don't have spring compressors, a couple of jubiliee clips around each spring before jacking makes them easier to get out.
-
handpaper
- E30 Zone Regular

- Posts: 883
- Joined: Sun Apr 16, 2006 11:00 pm
- Location: Newport, South Wales
Remove the shock bolt and the six allen bolts that hold the driveshaft to the diff and the arm drops down far enough for you to pull the spring out easily by hand. Levering the arm down tries to stretch the driveshaft - not good for the CV joints.
