thinks i got an airlock:(

Need technical Q/A then you're in the right place

Moderator: martauto

blacksoul
E30 Zone Newbie
E30 Zone Newbie
Posts: 168
Joined: Sun Jul 03, 2005 11:00 pm
Location: cwmbran south wales

Post Fri Dec 29, 2006 9:43 pm

hi guys few days ago my clutch felt funny. went all flopy. so got home and checked the fluid it was empty :( anyway got some fluid and topped her up. but i think there must be air stuck under the fluid now cos i cant change gear at all. so my question is even though i might sound a bit dull, how do i go about bleeding the air out. any advice would be fantastic. its a 87 325i convertible. thanx b.
Gortour
E30 Zone Team Member
E30 Zone Team Member
Posts: 9025
Joined: Sat Sep 23, 2006 11:00 pm
Location: Poole, Dorset

Post Fri Dec 29, 2006 9:51 pm

Easiest way is with a Gunsons Easi-Bleed. (only about £15 - £20)
All you need is a bottle with fluid connected to the clutch master cylinder and a spare tyre, then undo the bleed nipple on the slave cylinder, and do the bleed nipple up when it pees pure fluid. Otherwise its a two man job, one to pump the clutch, one under the car on the bleed nipple, and bleed it manually as you would the brakes.
Currently slumming it in an E46 Touring
User avatar
gooner1
Out humping Reindeer
Posts: 13280
Joined: Fri Apr 14, 2006 11:00 pm
Location: Northampton.For my sins.

Post Fri Dec 29, 2006 9:57 pm

Might need to let some pressure out of your spare tyre first though, done my brakes this way and got fluid
all over the place.Lucky i didnt blow seals on the brake reservoir thingy.Think it needs to be about 20 psi if irc.
Might be different for clutches though.
Image
Gortour
E30 Zone Team Member
E30 Zone Team Member
Posts: 9025
Joined: Sat Sep 23, 2006 11:00 pm
Location: Poole, Dorset

Post Fri Dec 29, 2006 9:58 pm

All in the instructions for the easi-bleed. Think it's actually 15psi...
Currently slumming it in an E46 Touring
User avatar
gooner1
Out humping Reindeer
Posts: 13280
Joined: Fri Apr 14, 2006 11:00 pm
Location: Northampton.For my sins.

Post Fri Dec 29, 2006 10:05 pm

gortour wrote:All in the instructions for the easi-bleed. Think it's actually 15psi...
Oooops did i forget to say i didnt read the destructions properley :o:
Image
Gortour
E30 Zone Team Member
E30 Zone Team Member
Posts: 9025
Joined: Sat Sep 23, 2006 11:00 pm
Location: Poole, Dorset

Post Fri Dec 29, 2006 10:10 pm

gooner1 wrote: Oooops did i forget to say i didnt read the destructions properley :o:
... When all else fails ... winkeye
very fair comment though, should really have mentioned the tyre pressure in my first post. Sorry guys.
Currently slumming it in an E46 Touring
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Fri Dec 29, 2006 10:58 pm

There's another way that's supposed to be good for awkward clutch hydraulics.
Open the front left caliper bleed nipple and flush the dirt out, connect a piece of plastic tube to the nipple and feed it with fluid from the brakes until it's full, push it on the clutch nipple, open the clutch nipple, and then proceed to "bleed" the brake in the normal manner, until you've pushed all the air back up to the clutch resevoir.
old_skool
E30 Zone Team Member
E30 Zone Team Member
Posts: 3405
Joined: Fri Sep 01, 2006 11:00 pm
Location: Glossersure

Post Sat Dec 30, 2006 12:43 am

There's another way that's supposed to be good for awkward clutch hydraulics.
Open the front left caliper bleed nipple and flush the dirt out, connect a piece of plastic tube to the nipple and feed it with fluid from the brakes until it's full, push it on the clutch nipple, open the clutch nipple, and then proceed to "bleed" the brake in the normal manner, until you've pushed all the air back up to the clutch resevoir.
Now that is clever. No reason I can see why that won't work.
Gortour
E30 Zone Team Member
E30 Zone Team Member
Posts: 9025
Joined: Sat Sep 23, 2006 11:00 pm
Location: Poole, Dorset

Post Sat Dec 30, 2006 11:50 am

Very clever. I'd never have thought of using the brakes to bleed the clutch...
Brilliant as always Brian.
Currently slumming it in an E46 Touring