ideal suspension geometry settings and spring rates

Need technical Q/A then you're in the right place

Moderator: martauto

gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Fri Dec 29, 2006 3:32 pm

i'm (slowly) sorting out the suspension on my car and the first thing on the cards is a rear end rebuild. i have some BMW rubber offset trailing arm bushes and polyflex rear subframe mounts to fit. lowering is about -40mm

at the front i have polyflex offset control arm bushes and a -50 ish drop (tbc, i'm making some coilovers for it as it's -70 or something stupid at present due to the wrong springs and a fat M30 lump!!)

does anyone have an idea on what toe and camber settings i should be looking for, from a handling point of view? also, is there a guide anywhere on how exactly to set up the offset rear bushes?

regarding the front springs, has anyone had a play with different spring rates or know the standard bmw rates? i can get any rate or length i want for about £30 a pair but i could use a starting point!
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Fri Dec 29, 2006 7:00 pm

just found some info on eccentric bushes... though they're the k-mak ones.

the data on the graphs will be innacurate if the bmw bushes have a different eccentric offset to the k-mak ones though.

http://e30m3performance.com/tech_articl ... c_bush.htm
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
DRIFTBOY
E30 Zone Addict
E30 Zone Addict
Posts: 3131
Joined: Mon May 22, 2006 11:00 pm
Location: Kent

Post Fri Dec 29, 2006 7:10 pm

Interesting link Gareth!

I wish I'd known about those bushes before I slammed my car on it's belly and fitted my Powerflex non-concentric ones! :cry:

Any ideas when your's will be back on the road?
Jeremy Clarkson wrote:...but it drives the front wheels. Theee wrooong wheels!
da4x4turbo wrote:I raced a vivaro on the motorway once in a 318is.... and lost!!!
Andy335Touring
Married to the E30 Zone
Married to the E30 Zone
Posts: 7144
Joined: Sun Jan 09, 2005 11:00 pm
Location: Long Eaton,Nottingham

Post Fri Dec 29, 2006 7:17 pm

gareth wrote:
regarding the front springs, has anyone had a play with different spring rates or know the standard bmw rates? i can get any rate or length i want for about £30 a pair but i could use a starting point!
have a look on R3V forum for coil over spring rates
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Fri Dec 29, 2006 7:26 pm

DRIFTBOY wrote:Interesting link Gareth!

I wish I'd known about those bushes before I slammed my car on it's belly and fitted my Powerflex non-concentric ones! :cry:
Tell me about it :(
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Fri Dec 29, 2006 7:27 pm

DRIFTBOY wrote:Interesting link Gareth!

I wish I'd known about those bushes before I slammed my car on it's belly and fitted my Powerflex non-concentric ones! :cry:

Any ideas when your's will be back on the road?
oops!!! :?

aside from the camber issues (as it's more obvious) you also get toe-in with lowering and with pokey RWD i can see that this could add a fair amount to the instability under power with the rear end trying to squirm about.

as you've just done yours, everything will be nice and easy to remove to do it again!!!! tyen you can pop by and do mine for me too! :D winkeye

mine has so far got absolutely nowhere!!!! i have got some subframe bushes in double quick time from the E30Zone shop (cheers sal!) but with the christmas lergi in full swing i haven't touched a spanner! i've been off work since 15/12/06 too!!!! :cry:

hopefully i can get some done before i return to work next tuesday though...
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Fri Dec 29, 2006 7:33 pm

Andy335Touring wrote:
gareth wrote:
regarding the front springs, has anyone had a play with different spring rates or know the standard bmw rates? i can get any rate or length i want for about £30 a pair but i could use a starting point!
have a look on R3V forum for coil over spring rates
cheers mate... do you have a link? maybe i'm being stupid but i can't find it!
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
DRIFTBOY
E30 Zone Addict
E30 Zone Addict
Posts: 3131
Joined: Mon May 22, 2006 11:00 pm
Location: Kent

Post Fri Dec 29, 2006 7:34 pm

Squirm about isn't the half of it!!!
Yesterday in the damp it was spinning the rear wheels in 3rd gear at 60+ mph! 8O

If you get stuck - I'm sure a man of your calibre won't though - I'm happy to lend a hand if I'm free of a weekend.

And as you say, at least all my nuts and bolts have been off within the last couple of months so shouldn't be too bad to change if I feel like doing it!
Jeremy Clarkson wrote:...but it drives the front wheels. Theee wrooong wheels!
da4x4turbo wrote:I raced a vivaro on the motorway once in a 318is.... and lost!!!
Turbo-Brown
Boost Junkie
Posts: 4705
Joined: Tue Feb 15, 2005 11:00 pm
Location: Aldershot, Hants

Post Fri Dec 29, 2006 7:38 pm

Yesterday in the damp it was spinning the rear wheels in 3rd gear at 60+ mph!
There's a lot of that going about at the moment :(
325i Twin Turbo (until 10am 01/12/07 :( )

www.air-in.co.uk free M20 exhaust and inlet flange
Andy335Touring
Married to the E30 Zone
Married to the E30 Zone
Posts: 7144
Joined: Sun Jan 09, 2005 11:00 pm
Location: Long Eaton,Nottingham

Post Fri Dec 29, 2006 7:38 pm

gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Fri Dec 29, 2006 7:58 pm

thanks martin, i should be fine, it's just summoning the enthusiasm to get out in the cold! :D

re wheelspinning, has anyone else noticed it being very very slipper lately? i've been having traction problems in the corrado when it comes on cam in 3rd!!! it's only 140bhp ish too! :eek:

oh and thanks for the link andy :D
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
DRIFTBOY
E30 Zone Addict
E30 Zone Addict
Posts: 3131
Joined: Mon May 22, 2006 11:00 pm
Location: Kent

Post Fri Dec 29, 2006 8:05 pm

gareth wrote:thanks martin, i should be fine, it's just summoning the enthusiasm to get out in the cold! :D

re wheelspinning, has anyone else noticed it being very very slippery lately?
No probs - good luck!

And yes, I've noticed the slipperyness - great isn't it! :D
Jeremy Clarkson wrote:...but it drives the front wheels. Theee wrooong wheels!
da4x4turbo wrote:I raced a vivaro on the motorway once in a 318is.... and lost!!!
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Fri Dec 29, 2006 8:07 pm

if the rear wheels are doing the steering then it is good! if not, then it isn't!!!
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
Andy335Touring
Married to the E30 Zone
Married to the E30 Zone
Posts: 7144
Joined: Sun Jan 09, 2005 11:00 pm
Location: Long Eaton,Nottingham

Post Fri Dec 29, 2006 8:12 pm

gareth wrote:if the rear wheels are doing the steering then it is good! if not, then it isn't!!!
Yep, i've got some Avon's on the front that arn't the best tyres :(

might stick em on the back and see if i can wear them out quicker ! :twisted:
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Fri Dec 29, 2006 8:26 pm

i do that! if i don't like tyres i put them on the back (or front on a FWD wrongnessmobile) to kill them off!
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
Andy335Touring
Married to the E30 Zone
Married to the E30 Zone
Posts: 7144
Joined: Sun Jan 09, 2005 11:00 pm
Location: Long Eaton,Nottingham

Post Fri Dec 29, 2006 8:32 pm

I was keeping my Goodyears on the back to be safer in the wet(high speed over steer :eek: ) but i just want to kill these Avons
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Fri Dec 29, 2006 8:37 pm

i finished my (by then borderline illegal) toyo rears off at the pod rather nicely!!! loads of rubber splattered up the rear quarters!!!!

incidentally, i've still got my number on the rear window!!!
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
Andy335Touring
Married to the E30 Zone
Married to the E30 Zone
Posts: 7144
Joined: Sun Jan 09, 2005 11:00 pm
Location: Long Eaton,Nottingham

Post Fri Dec 29, 2006 8:42 pm

gareth wrote:
incidentally, i've still got my number on the rear window!!!
LOL, Pod slag 335 :D
DRIFTBOY
E30 Zone Addict
E30 Zone Addict
Posts: 3131
Joined: Mon May 22, 2006 11:00 pm
Location: Kent

Post Fri Dec 29, 2006 8:44 pm

I might be up for some RWYB Pod action end of january or mid february, I have looked up all the dates. Need to get mine down the strip! winkeye
Jeremy Clarkson wrote:...but it drives the front wheels. Theee wrooong wheels!
da4x4turbo wrote:I raced a vivaro on the motorway once in a 318is.... and lost!!!
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Fri Dec 29, 2006 9:01 pm

What tyre size do you use Gareth? Ive got the same wheels as you and have worn my 225/45/16 rears out quicker than expected. (inside edges) Considering some 205/45's same as the front, what do you reckon?
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Fri Dec 29, 2006 9:16 pm

i'm running 215/40/16 toyo proxes

Image

Image

cost me about £160 for the set on here a while ago but they're a bit more now
http://ssl.delti.com/mytires/Tyres.html
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Fri Dec 29, 2006 10:18 pm

40's 8O

My gearing is high enough as it is :(
According to the tyre calculator I would lose over an inch in diameter and about 3mph
Ive been thinking of 50's for some tight arse mpg saving motorway miles,

You got those bloody cheap! Im being quoted nearly twice that for them in my size. They still dont beat my local discount tyre place though :?
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Sat Dec 30, 2006 9:49 am

they were on offer but still bloody cheap! it's a nice cheap size, handles well but does drop the rolling diameter a bit but i like this and it suits the car well

with my smaller tyres and 3.91 diff, economy is interesting! i must find a taller diff at some point!
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details