ideal suspension geometry settings and spring rates
Moderator: martauto
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
i'm (slowly) sorting out the suspension on my car and the first thing on the cards is a rear end rebuild. i have some BMW rubber offset trailing arm bushes and polyflex rear subframe mounts to fit. lowering is about -40mm
at the front i have polyflex offset control arm bushes and a -50 ish drop (tbc, i'm making some coilovers for it as it's -70 or something stupid at present due to the wrong springs and a fat M30 lump!!)
does anyone have an idea on what toe and camber settings i should be looking for, from a handling point of view? also, is there a guide anywhere on how exactly to set up the offset rear bushes?
regarding the front springs, has anyone had a play with different spring rates or know the standard bmw rates? i can get any rate or length i want for about £30 a pair but i could use a starting point!
at the front i have polyflex offset control arm bushes and a -50 ish drop (tbc, i'm making some coilovers for it as it's -70 or something stupid at present due to the wrong springs and a fat M30 lump!!)
does anyone have an idea on what toe and camber settings i should be looking for, from a handling point of view? also, is there a guide anywhere on how exactly to set up the offset rear bushes?
regarding the front springs, has anyone had a play with different spring rates or know the standard bmw rates? i can get any rate or length i want for about £30 a pair but i could use a starting point!
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
just found some info on eccentric bushes... though they're the k-mak ones.
the data on the graphs will be innacurate if the bmw bushes have a different eccentric offset to the k-mak ones though.
http://e30m3performance.com/tech_articl ... c_bush.htm
the data on the graphs will be innacurate if the bmw bushes have a different eccentric offset to the k-mak ones though.
http://e30m3performance.com/tech_articl ... c_bush.htm
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
DRIFTBOY
- E30 Zone Addict

- Posts: 3131
- Joined: Mon May 22, 2006 11:00 pm
- Location: Kent
Interesting link Gareth!
I wish I'd known about those bushes before I slammed my car on it's belly and fitted my Powerflex non-concentric ones!
Any ideas when your's will be back on the road?
I wish I'd known about those bushes before I slammed my car on it's belly and fitted my Powerflex non-concentric ones!
Any ideas when your's will be back on the road?
Jeremy Clarkson wrote:...but it drives the front wheels. Theee wrooong wheels!
da4x4turbo wrote:I raced a vivaro on the motorway once in a 318is.... and lost!!!
-
Andy335Touring
- Married to the E30 Zone

- Posts: 7144
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Long Eaton,Nottingham
have a look on R3V forum for coil over spring ratesgareth wrote:
regarding the front springs, has anyone had a play with different spring rates or know the standard bmw rates? i can get any rate or length i want for about £30 a pair but i could use a starting point!
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Tell me about itDRIFTBOY wrote:Interesting link Gareth!
I wish I'd known about those bushes before I slammed my car on it's belly and fitted my Powerflex non-concentric ones!
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
oops!!!DRIFTBOY wrote:Interesting link Gareth!
I wish I'd known about those bushes before I slammed my car on it's belly and fitted my Powerflex non-concentric ones!
Any ideas when your's will be back on the road?
aside from the camber issues (as it's more obvious) you also get toe-in with lowering and with pokey RWD i can see that this could add a fair amount to the instability under power with the rear end trying to squirm about.
as you've just done yours, everything will be nice and easy to remove to do it again!!!! tyen you can pop by and do mine for me too!
mine has so far got absolutely nowhere!!!! i have got some subframe bushes in double quick time from the E30Zone shop (cheers sal!) but with the christmas lergi in full swing i haven't touched a spanner! i've been off work since 15/12/06 too!!!!
hopefully i can get some done before i return to work next tuesday though...
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
cheers mate... do you have a link? maybe i'm being stupid but i can't find it!Andy335Touring wrote:have a look on R3V forum for coil over spring ratesgareth wrote:
regarding the front springs, has anyone had a play with different spring rates or know the standard bmw rates? i can get any rate or length i want for about £30 a pair but i could use a starting point!
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
DRIFTBOY
- E30 Zone Addict

- Posts: 3131
- Joined: Mon May 22, 2006 11:00 pm
- Location: Kent
Squirm about isn't the half of it!!!
Yesterday in the damp it was spinning the rear wheels in 3rd gear at 60+ mph!
If you get stuck - I'm sure a man of your calibre won't though - I'm happy to lend a hand if I'm free of a weekend.
And as you say, at least all my nuts and bolts have been off within the last couple of months so shouldn't be too bad to change if I feel like doing it!
Yesterday in the damp it was spinning the rear wheels in 3rd gear at 60+ mph!
If you get stuck - I'm sure a man of your calibre won't though - I'm happy to lend a hand if I'm free of a weekend.
And as you say, at least all my nuts and bolts have been off within the last couple of months so shouldn't be too bad to change if I feel like doing it!
Jeremy Clarkson wrote:...but it drives the front wheels. Theee wrooong wheels!
da4x4turbo wrote:I raced a vivaro on the motorway once in a 318is.... and lost!!!
-
Turbo-Brown
- Boost Junkie
- Posts: 4705
- Joined: Tue Feb 15, 2005 11:00 pm
- Location: Aldershot, Hants
There's a lot of that going about at the momentYesterday in the damp it was spinning the rear wheels in 3rd gear at 60+ mph!
-
Andy335Touring
- Married to the E30 Zone

- Posts: 7144
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Long Eaton,Nottingham
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
thanks martin, i should be fine, it's just summoning the enthusiasm to get out in the cold!
re wheelspinning, has anyone else noticed it being very very slipper lately? i've been having traction problems in the corrado when it comes on cam in 3rd!!! it's only 140bhp ish too!
oh and thanks for the link andy
re wheelspinning, has anyone else noticed it being very very slipper lately? i've been having traction problems in the corrado when it comes on cam in 3rd!!! it's only 140bhp ish too!
oh and thanks for the link andy
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
DRIFTBOY
- E30 Zone Addict

- Posts: 3131
- Joined: Mon May 22, 2006 11:00 pm
- Location: Kent
No probs - good luck!gareth wrote:thanks martin, i should be fine, it's just summoning the enthusiasm to get out in the cold!![]()
re wheelspinning, has anyone else noticed it being very very slippery lately?
And yes, I've noticed the slipperyness - great isn't it!
Jeremy Clarkson wrote:...but it drives the front wheels. Theee wrooong wheels!
da4x4turbo wrote:I raced a vivaro on the motorway once in a 318is.... and lost!!!
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
if the rear wheels are doing the steering then it is good! if not, then it isn't!!!
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
Andy335Touring
- Married to the E30 Zone

- Posts: 7144
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Long Eaton,Nottingham
Yep, i've got some Avon's on the front that arn't the best tyresgareth wrote:if the rear wheels are doing the steering then it is good! if not, then it isn't!!!
might stick em on the back and see if i can wear them out quicker !
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
i do that! if i don't like tyres i put them on the back (or front on a FWD wrongnessmobile) to kill them off!
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
Andy335Touring
- Married to the E30 Zone

- Posts: 7144
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Long Eaton,Nottingham
I was keeping my Goodyears on the back to be safer in the wet(high speed over steer
) but i just want to kill these Avons
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
i finished my (by then borderline illegal) toyo rears off at the pod rather nicely!!! loads of rubber splattered up the rear quarters!!!!
incidentally, i've still got my number on the rear window!!!
incidentally, i've still got my number on the rear window!!!
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
Andy335Touring
- Married to the E30 Zone

- Posts: 7144
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Long Eaton,Nottingham
LOL, Pod slag 335gareth wrote:
incidentally, i've still got my number on the rear window!!!
-
DRIFTBOY
- E30 Zone Addict

- Posts: 3131
- Joined: Mon May 22, 2006 11:00 pm
- Location: Kent
I might be up for some RWYB Pod action end of january or mid february, I have looked up all the dates. Need to get mine down the strip! 
Jeremy Clarkson wrote:...but it drives the front wheels. Theee wrooong wheels!
da4x4turbo wrote:I raced a vivaro on the motorway once in a 318is.... and lost!!!
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
What tyre size do you use Gareth? Ive got the same wheels as you and have worn my 225/45/16 rears out quicker than expected. (inside edges) Considering some 205/45's same as the front, what do you reckon?
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
i'm running 215/40/16 toyo proxes


cost me about £160 for the set on here a while ago but they're a bit more now
http://ssl.delti.com/mytires/Tyres.html


cost me about £160 for the set on here a while ago but they're a bit more now
http://ssl.delti.com/mytires/Tyres.html
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
40's
My gearing is high enough as it is
According to the tyre calculator I would lose over an inch in diameter and about 3mph
Ive been thinking of 50's for some tight arse mpg saving motorway miles,
You got those bloody cheap! Im being quoted nearly twice that for them in my size. They still dont beat my local discount tyre place though
My gearing is high enough as it is
According to the tyre calculator I would lose over an inch in diameter and about 3mph
Ive been thinking of 50's for some tight arse mpg saving motorway miles,
You got those bloody cheap! Im being quoted nearly twice that for them in my size. They still dont beat my local discount tyre place though
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
they were on offer but still bloody cheap! it's a nice cheap size, handles well but does drop the rolling diameter a bit but i like this and it suits the car well
with my smaller tyres and 3.91 diff, economy is interesting! i must find a taller diff at some point!
with my smaller tyres and 3.91 diff, economy is interesting! i must find a taller diff at some point!
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
