who wants to fit a head gasket for me on my 6 pot

Need technical Q/A then you're in the right place

Moderator: martauto

seanboy
E30 Zone Regular
E30 Zone Regular
Posts: 642
Joined: Mon Aug 21, 2006 11:00 pm
Location: Beckenham

Post Wed Dec 27, 2006 6:00 pm

as above

contact no 07813 002571
location beckenham

cheers.
ajm-e30
E30 Zone Regular
E30 Zone Regular
Posts: 472
Joined: Sat Nov 11, 2006 11:00 pm
Location: newport,land of sheep sh***ers

Post Wed Dec 27, 2006 6:01 pm

to far for me to come
Image
seanboy
E30 Zone Regular
E30 Zone Regular
Posts: 642
Joined: Mon Aug 21, 2006 11:00 pm
Location: Beckenham

Post Wed Dec 27, 2006 6:03 pm

just a bit
User avatar
eltel
E30 Zone Regular
E30 Zone Regular
Posts: 654
Joined: Wed Nov 09, 2005 11:00 pm
Location: mid wales

Post Fri Dec 29, 2006 11:12 am

tackle it yourself..i did and was a sinch!!! just take your time and make sure you get the head skimmed!!!

take a piece off one by one and mark them with tip ex if necessary
Only in the good lord we trust.. In everything else we check!!


1988 325i Tourer, Lowered, Deep Dish Alloys, Obc, Cruise Control, Heated Leather Sport Seats....
bigun
E30 Zone Regular
E30 Zone Regular
Posts: 386
Joined: Sat Jan 21, 2006 11:00 pm

Post Fri Dec 29, 2006 11:18 am

thats if it aint cracked
jcjdavis1
E30 Zone Camper
E30 Zone Camper
Posts: 1128
Joined: Thu Apr 13, 2006 11:00 pm
Location: Paisley Scotland

Post Fri Dec 29, 2006 1:04 pm

eltel wrote:tackle it yourself..i did and was a sinch!!! just take your time and make sure you get the head skimmed!!!

take a piece off one by one and mark them with tip ex if necessary
Hi everything is easy when you know how,I have been taking bits off mine but have come to a halt as I see things that scare me :surrender: and don't want to fcuk it up so will let people who know what they are doing carry on.
User avatar
gooner1
Out humping Reindeer
Posts: 13280
Joined: Fri Apr 14, 2006 11:00 pm
Location: Northampton.For my sins.

Post Fri Dec 29, 2006 1:16 pm

Sorry to butt in but im planning to try a top end rebuild myself soon which i assume means replacing the head gasketbut why would you have to have the head skimmed ?. Or is it only if your head gasket has blown,also im pretty sure that ive seen on here that its better to have metal added to head rather than have it taken off,or am i getting mixed up with something else(as per). Thanks, :?
Image
aauser
E30 Zone Newbie
E30 Zone Newbie
Posts: 232
Joined: Wed Feb 23, 2005 11:00 pm
Location: Sheffield

Post Fri Dec 29, 2006 1:24 pm

Head usually needs skimming if the head gskt failed due to overheating etc. It's in case the head is warped and to make sure that the whole job is not just a waste of time as you could still be left with a leaking head gskt if you didn't have your head skimmed.
Skimming the head does increase the compression ratio a little but thicker head gskts are available for some vehicles (not sure about BMW) to compensate for this.
if you're just doing a strip & rebuild, skimming is NOT strictly neccesary, as long as you have the head checked and pressure tested. However, having said that, if you are going to the expense of doing a strip/rebuild, skimming would definately be a good idea.

HTH, Ray
User avatar
gooner1
Out humping Reindeer
Posts: 13280
Joined: Fri Apr 14, 2006 11:00 pm
Location: Northampton.For my sins.

Post Fri Dec 29, 2006 1:33 pm

Thanks for that Ray, if the head is checked and pressure tested what is the advantage of having it skimmed?.
Apologies for my densness but im no mechanic but you gotta have a hobby havent you.
Image
dips346
London Meets Main Man
Posts: 3977
Joined: Fri Jan 14, 2005 11:00 pm
Location: heston/heathrow

Post Fri Dec 29, 2006 1:39 pm

pm nelly he can help you out
aauser
E30 Zone Newbie
E30 Zone Newbie
Posts: 232
Joined: Wed Feb 23, 2005 11:00 pm
Location: Sheffield

Post Fri Dec 29, 2006 1:40 pm

The advantage of getting it skimmed is that you get a nice smooth and 100% flat surface on the underneath of the head where it sits onto the head gskt and cyl block so you know that you'll have a good seal.
But, as I said, this will slightly increase the compression ratio (depending on how much is skimmed off) which could be a problem, depending on what you're doing with the engine, with regards to tuning etc.
Last edited by aauser on Fri Dec 29, 2006 2:26 pm, edited 1 time in total.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Fri Dec 29, 2006 2:23 pm

As aauser's reply - to get a nice smooth, flat surface. There are a couple of shallow holes on the head face which, when skimmed to the bottom of these holes, is the absolute limit.